019/8/26 USB Accelerator database | Coral + Google Edge TPU ML accelerator co processor e USB 3.0 Type-C socket + Supports Debian Linux on host CPU Overview The Coral USB Accelerator Is o USB device that adds an Edge TPU co processor to your system, ft includes a USB socket 50 you con connect it to any Linseed system to perform accelerated ML conferencing. The on-board Edge TPU is a small SIC designed by Google that provides high performance ML incinerating with a ow power cost.
2019/8/26 USB Accelerator database | Coral The Coral LSB Accelerator must be connected to a host computer with the following specifications: + Any Lin computer with a USB port o Debian 6.0 or higher, or any derivative thereof {such as Ubuntu 10.
2019/8/26 USB Accelerator database | Coral Figure 1. Device dimensions and mounting hole details LSB cable length: 300mm 20 rom Software and operation The USB Accelerator doesn't require any software Installed, but the host computer to which it's attached must install the Edge TPU rudiment and AP bray. For instructions, see the Get Started guide. For information bot how to create models and run inferences the Edge TRU, read TensorFlow models on the Edge TPU.
2019/8/26 USB Accelerator database | Coral Fre Ub Accelerator includes an LED that tights up according 1o the current system state, os indicated in the following table, Stern state BED Behavior Edge TRU initialized | On {solid} Edge TPU running Pulse {breathe} Power specifications The Coral USB Accelerator Is powered by SV from USB interface (USB BUS) through on board power management chip (PM. The device should be connected to o host computer with o USB cable that provides ot least 500m of SV.
2019/8/26 USB Accelerator database | Coral Test Conditions Verified Feat soak Non-op: 7ihrs Tern eyeing Non-op: 300 cycles Short tear suitability Non-op: 18hrs | 18 hours Termination operational stress (RIGHTO) | Op: 1000 hours ESE) Air discharge 30-60% RH 2kY £80) Contact discharge 30-60% RH BY Monomaniacal reliability tests Test Conditions Verified (1 8er controlled drop on & faces, 12 edges, 5/4" wood 18 drops wi 08m turntable Impact surface: steel plate » 3 rim thick 50 drops Repetitive drop 75 ram drop