User Guide

CAX21
User Guide
First Edion
February 2015
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
No part of this manual, including the products and soware described in it, may
be reproduced, transmied, transcribed, stored in a retrieval system, or translat-
ed into any language in any form or by any means, except documentaon kept
by the purchaser for backup purposes, without the express wrien permission of
ASUSTeK COMPUTER INC. (“ASUS”).
Product warranty or service will not be extended if: (1) the product is repaired,
modied or altered, unless such repair, modicaon of alteraon is authorized
in wring by ASUS; or (2) the serial number of the product is defaced or missing.
ASUS PROVIDES THIS MANUAL “AS IS” WITHOUT WARRANTY OF ANY KIND,
EITHER EXPRESS OR IMPLIED, INCLUDING BUT NOT LIMITED TO THE IMPLIED
WARRANTIES OR CONDITIONS OF MERCHANTABILITY OR FITNESS FOR A PAR-
TICULAR PURPOSE. IN NO EVENT SHALL ASUS, ITS DIRECTORS, OFFICERS, EM-
PLOYEES OR AGENTS BE LIABLE FOR ANY INDIRECT, SPECIAL, INCIDENTAL, OR
CONSEQUENTIAL DAMAGES (INCLUDING DAMAGES FOR LOSS OF PROFITS, LOSS
OF BUSINESS, LOSS OF USE OR DATA, INTERRUPTION OF BUSINESS AND THE
LIKE), EVEN IF ASUS HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES
ARISING FROM ANY DEFECT OR ERROR IN THIS MANUAL OR PRODUCT.
SPECIFICATIONS AND INFORMATION CONTAINED IN THIS MANUAL ARE FUR-
NISHED FOR INFORMATIONAL USE ONLY, AND ARE SUBJECT TO CHANGE AT
ANY TIME WITHOUT NOTICE, AND SHOULD NOT BE CONSTRUED AS A COMMIT-
MENT BY ASUS. ASUS ASSUMES NO RESPONSIBILITY OR LIABILITY FOR ANY ER-
RORS OR INACCURACIES THAT MAY APPEAR IN THIS MANUAL, INCLUDING THE
PRODUCTS AND SOFTWARE DESCRIBED IN IT.
Products and corporate names appearing in this manual may or may not be
registered trademarks or copyrights of their respecve companies, and are used
only for idencaon or explanaon and to the owners’ benet, without intent
to infringe.
Safety Informaon
● Before seng up the client box, carefully read all the documentaon that
came with the package.
● To prevent re or shock hazard, never expose the monitor to rain or mois-
ture.
● Never try to open the box cabinet. The dangerous high voltages inside the
box may result in serious physical injury.
● If the power supply is broken, do not try to x it by yourself. Contact a
qualied service technician or your retailer.
● Before using the product, make sure all cables are correctly connected and
the power cables are not damaged. If you detect any damage, contact your
dealer immediately.
● Slots and openings on the back or top of the cabinet are provided for ven-
laon. Do not block these slots. Never place this product near or over a
radiator or heat source unless proper venlaon is provided.
● The client box should be operated only from the type of power source
indicated on the label. If you are not sure of the type of power supply to
your home, consult your dealer or local power company.
● Use the appropriate power plug which complies with your local power
standard.
● Do not overload power strips and extenon cords. Overloading can result in
re or electric shock.
● Avoid dust, humidity, and temperature extremes. Do not place the box in
any area where it may become wet. Place the box on a stable surface.
● Unplug the unit during a lightning storm or if it will not be used for a long
period of me. This will protect the box from damage due to power surges.
● Never push objects or spill liquid of any kind into the slots on the box cabi-
net.
● The socket-outlet shall be installed near the equipment and shall be easily
accessible.
● If you encounter technical problems with the client box, contact a qualied
service technician or your retailer.
Client Box introducon
Copyright © 2015 ASUSTeK COMPUTER INC. All Rights Reserved.
Client Box introducon
Front of the box
Side of the box
Rear of the box
Wall mount bracket (Oponal)
Earphone-out
Power key
Micro SD slot
Kensington lock
Microphone input
VGA
HDMI
RJ45
Power-in jack
USB connector
Hanging hole
Wall mount 100x100mm
Wall mount 75x75mm
Cleats
Remote Control
1. Power buon
Installing remote control baery
1. Open the baery compartment cover.
2. Remove the insulator and insert the
baery with the posive(+) symbol
facing up.
3. Ret the baery compartment cover.
The incorrect use of baeries
can result in leaks or bursng.
Be sure to follow the instrucon.
2. OK buon
3. Home buon
4. Volume Up
5. Volume Down
6. Seng buon
7. Back buon
8. Four Direconal
select
9. Mute buon
- Press and hold the buon
to turns the box on/o.
- Press the buon once to
put the box in sleep mode.
- Conrms the selecon.
- Enters the submenu.
Goes back to the main page.
Increases the volume level.
Decreases the volume level.
Turns the seng page on/o.
Goes back to the previous Page.
- Selects a menu item
- Adjusts the seng
Mutes the audio. Press it again
to disable the mute Funcon.