Quick Start Guide

ASUS ZenWiFi Pro ET12
AXE11000 Tri Band Router
Model: ET12
Quick
Start Guide
1
Plug the adapter into the DCIN port, and press the power switch.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
Button and Port Explanations
2.5G / 1G WAN port
Connect your optical modem to this
port with a network cable.
LAN ports 1-2
Connect your PC to a LAN port with
a network cable.
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find two ZenWiFi Pro ET12, and power both on.
2
Use a network cable to connect your optical modem to the WAN port of either ZenWiFi Pro
ET12. This ZenWiFi Pro ET12 will be the AiMesh router, and the other ZenWiFi Pro ET12 will
be the AiMesh node.
3
The LEDs turn solid blue to indicate that ZenWiFi Pro ET12 is ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh Setup Steps
AiMesh routerAiMesh node
Download free ASUS Router APP to set up
and manage your router(s).
AiMesh routerAiMesh node
within
3 meters
Prepare
01
Place your AiMesh router and node within 3 meters of each
other during the setup process.
AiMesh node
02
Keep your AiMesh node powered on and standby for AiMesh
system settings.
Enable Bluetooth on your phone. Launch ASUS Router APP, and then follow the on-screen in-
structions to finish the AiMesh setup.
Enabling Bluetooth Launching ASUS Router APP
03 04
If your AiMesh router cannot find any AiMesh node nearby or
synchronization fails, please check the following and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is
within 3 meters.
b
Your AiMesh node is powered on.
DC Power adapter DC Output: +19V with max 2.37A current
+19.5V with max 2.31A current
Operating Temperature 0~40
o
C Storage Temperature 0~70
o
C
Operating Humidity 50~90% Storage Humidity 20~90%
Specications:
LAN ports 1-2
WPS button
Reset button
Power switch
DCIN port
2.5G / 1G LAN port
Connect your PC to a 2.5G / 1G LAN
port with a network cable.
2.5G / 1G WAN port
2.5G / 1G LAN port