Quick Start Guide

Aimesh node
Aimesh router
At least 1 meter
1
Plug the adapter into the DC port, and press the power switch.
2
The power LED will light up when your hardware is ready.
Hardware Explanations
Before Setup
ASUS Router App
AiMesh Setup Steps
Troubleshooting
1
Find two ZenWiFi BQ16 Pro, and power both on.
2
Use a network cable to connect your optical modem to the WAN/
LAN1 10G port of ZenWiFi BQ16 Pro with the “Main Unit” sticker.
This ZenWiFi BQ16 Pro will be the AiMesh router, and the other
ZenWiFi BQ16 Pro will be the AiMesh node.
3
The LED turns solid blue to indicate that ZenWiFi BQ16 Pro is
ready for setup.
Preparing to set up an AiMesh WiFi system
AiMesh router
AiMesh Setup Steps
AiMesh node
Download free ASUS Router APP to set up and
manage your router(s).
Prepare
01
Place your AiMesh router and node in the same
room and at least 1 meter apart during the setup
process.
AiMesh node
02
Keep your AiMesh node powered on and standby
for AiMesh system settings.
Launch ASUS Router APP, and then follow the
on-screen instructions to finish the AiMesh setup.
Launching ASUS Router APP
03
If your AiMesh router cannot find any AiMesh node nearby or synchronization fails, please check the following
and try again.
a
Move your AiMesh node closer to the AiMesh router ideally. Ensure that it is within 3 meters.
b
Your AiMesh node is powered on.
NOTE: When you’re using a wireless backhaul to connect your router and AiMesh
node, the WAN/LAN ports on your AiMesh node can be used as LAN ports.
ASUS ZenWiFi BQ16 Pro
BE30000 Quad Band WiFi Router
Model: BQ16 Pro
Quick
Start Guide
ZenWiFi BQ16 Pro Overview
WAN/LAN1 10G port, WAN/LAN2 port
Connect your optical modem to WAN/LAN1
10G port (default WAN Port) with a network
cable.
LAN 4-5 ports
Connect your PC to a LAN port with a
network cable.
DC Power adapter DC Output: +12V with max 5A current
+19.5V with max 3.33A current
Operating Temperature 0~40
o
C Storage 0~70
o
C
Operating Humidity 50~90% Storage 20~90%
Specications:
USB 3.2 Gen 1x1 WAN/LAN2
port
LAN 4-5 ports
Power switch
* If no 6GHz SSID is displayed, please check whether your OS and client device
are fully licensed to support the newly released 6GHz band. You can check with
your OS and client device provider for Wi-Fi 6E driver release schedule.
10G LAN3
port
10G WAN/
LAN1 port
Power (DC) port
E22585