MB16AWP Wireless Portable Monitor User Guide 2 SECS
First Edition January 2022 Copyright © 2022 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents....................................................................................................... iii Notices.......................................................................................................... iv Safety information..................................................................................... viii Care & Cleaning........................................................................................... ix Takeback Services..................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
The exposure standard employs a unit of measurement known as the Specific Absorption Rate, or SAR. The SAR limit set by the FCC is 1.6 W/kg. Tests for SAR are conducted using standard operating positions accepted by the FCC with the EUT transmitting at the specified power level in different channels. The FCC has granted an Equipment Authorization for this device with all reported SAR levels evaluated as in compliance with the FCC RF exposure guidelines.
Canada IC Canada, Industry Canada (IC) Notices This device complies with Canada licence-exempt RSS standard(s). Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device. Canada, avis d'Industry Canada (IC) Le présent appareil est conforme aux CNR d'Industrie Canada applicables aux appareils radio exempts de licence.
conditions d'exposition portatifs. For 5150~5250MHz Band: This device is for indoor use only when operated in the frequency band 5150 ~5250 MHz Ce dispositif est limité à une utilisation en intérieur seulement dans la bande 5150-5250 MHz.
Simplified EU Declaration of Conformity ASUSTek Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of Directive 2014/53/EU. Full text of EU declaration of conformity is available at https://www.asus.com/support/ The WiFi operating in the band 5150-5350MHz shall be restricted to indoor use for countries listed in the table below: Déclaration simplifiée de conformité de l’UE ASUSTek Computer Inc.
Supaprastinta ES atitikties deklaracija Šiame dokumente bendrovė „ASUSTek Computer Inc.“ pareiškia, kad šis prietaisas atitinka pagrindinius reikalavimus ir kitas susijusias Direktyvos 2014/53/ES nuostatas. Visas ES atitikties deklaracijos tekstas pateikiamas čia: https://www.asus.com/support/ Toliau nurodytose šalyse „WiFi“ ryšiu, veikiančiu 5 150–5 350 MHz dažnio juostoje, galima naudotis tik patalpose: Forenklet EU-samsvarserklæring ASUSTek Computer Inc.
Complies with IMDA Standards DB103778 x
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
This symbol of the crossed out wheeled bin indicates that the product (electrical, electronic equipment, and mercury-containing button cell battery) should not be placed in municipal waste. Please check local regulations for disposal of electronic products. AEEE yönetmeliğine uygundur Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® Wireless Portable Monitor! The latest ASUS Wireless Portable Monitor provides great portability and simplicity to your daily life, enhancing both of your viewing experience and style. 1.
1.3 Monitor introduction 1.3.1 Front/Side view 8 9 10 3 Main Menu 4 Close 5 Volume 6 Input Select 7 Brightness Main Menu Close Volume Input Select Brightness 11 2 SECS 2 1. Power button/power indicator • Turns the monitor on (long press for 2 seconds)/off. • The color definition of the power indicator is as the below table. 2.
6. Input Select • 7. Move the 5-way button up to enter the Input Select menu. Brightness • Move the 5-way button down to enter the Brightness menu. 8. Earphone jack 9. Mini HDMI port • This port is for connection with an HDMI compatible device. 10. USB Type-C port • 11. This port is for connection with a DP-Alt mode compatible device. USB Type-C port • This port connects the power adapter.
1-4 Chapter 1: Product introduction
2.1 Monitor standing positions You can stand up the monitor in the following positions. A B 2 SECS 2 SECS 2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle at 15˚ ~ 35˚.
2.3 Connecting the cables A Type-C Type-C 2 SECS or B Mini HDMI HDMI 2 2.4 SECS Turning on the monitor Press and hold the power button for 2 seconds. See page 1-2 for the location of the power button. The power indicator lights up in blue to show that the monitor is ON. The start up process takes about 30 seconds. 2 SECS We suggest you charge the monitor before using it for the first time.
When there is no input signal or no action made on the OSD menu for around 6 minutes when the signal source is "Wireless" or for one hour when the signal source is not HDMI or USB Type-C without power supply, the monitor will turn off automatically. To turn on the monitor, press and hold the power button for 2 seconds. 2.5 Performing wireless projection 1. Make sure that the signal source for the monitor is "Wireless". 2. For different devices, follow the steps below.
2.6 Connecting the monitor to the Internet 1. Turn on the monitor and make sure that the signal source is "Wireless". 2. Connecting MB16AWP in the Wi-Fi settings on your device (make sure both of your device and the monitor are in the same subnetwork). 3. Open your web browser and go to the address of the monitor (192.168.203.1). http://192.168.203.1 192.168.203.1 2 2-4 SECS 4. Select a WiFi network that you want to join. 5. Enter the password if asked.
2.7 Updating wireless projection firmware 1. Make sure that the monitor connects to the Internet. 2. After the monitor successfully connects to the Internet, new IP address will be assigned to the monitor and displayed on the upper right corner of the monitor. 3. Connect your device to the same WiFi network as the monitor. 4. Open the web browser on your device and go to the IP address of the monitor (displayed on the upper right corner of the monitor).
If the monitor is up to date with the latest firmware, the following message will appear. 2.8 Announcements As this product includes magnet in the structure, there could be potential risk to cause the damage of computer hard disc and objects that are sensitive to magnet.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure ASUS MB16AWP 80 Scenery Mode Wireless 1920 x 1080 @ 60Hz Splendid S t a n d a r d Mo d e s R G B Mo d e S c e n e r y Mo d e Th e a t e r Mo d e Ga me Mo d e N i g h t V i e w Mo d e R e a d i n g Mo d e D a r k r o o m Mo d e 1. Press the 5-way button 2. Move the 5-way button (left, right, up, or down) to toggle between options in the menu. As you move from one icon to another, the option name is highlighted. twice to activate the OSD menu.
3.1.2 1. OSD function introduction Splendid This function contains 8 sub-functions you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode.
2. Blue Light Filter In this function, you can adjust the blue light filter level. Blue Light Filter ASUS MB16AWP 80 Scenery Mode Wireless 1920 x 1080 @ 60Hz Level 0 Level 1 Level 2 Level 3 Level 4 • Level 0: No change. • Level 1~4: The higher the level, the less blue light is scattered. When Blue Light Filter is activated,the default settings of Standard Mode will be automatically imported. Between Level 1 to Level 3, the Brightness function is user-configurable. Level 4 is optimized setting.
3. Color Set a desired color setting from this menu. Color ASUS MB16AWP 80 Scenery Mode Wireless 1920 x 1080 @ 60Hz Brightness Contrast Saturation C o l o r T e mp . Skin Tone • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: Contains 4 modes including Cool, Normal, Warm and User Mode. • Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish. 4.
5. Input Select In this function, you can select your desired input source. Input Select ASUS MB16AWP 80 Scenery Mode Wireless 1920 x 1080 @ 60Hz H D MI U S B Ty p e - c Wireless 6. System Setup Allows you to adjust the system. System Setup ASUS MB16AWP 80 Scenery Mode Wireless 1920 x 1080 @ 60Hz S p l e n d i d D e mo Mo d e Auto Rotation E C O Mo d e V o l u me G a me P l u s QuickFit OSD Setup Mo r e • Splendid Demo Mode: Splits the screen into two for Splendid modes comparison.
GamePlus Main Menu GamePlus — Crosshair GamePlus Crosshair Timer Display Alignment (Practice Mode) GamePlus — Timer GamePlus — Timer — Position Position • QuickFit: You can have a preview of the document or photo layout directly on screen without printing test copies. * Alignment: This facilitates designers and users to organize content and layout on one page and achieve a consistent look and feel.
• OSD Setup: * Adjusts the OSD timeout from 10 to 120 seconds. * Enables or disables the DDC/CI function. * Adjusts the OSD background from opaque to transparent. • Language: There are 22 languages for your selection, including English, French, German, Italian, Spanish, Dutch, Portuguese, Russian, Czech, Croatian, Polish, Romanian, Hungarian, Turkish, Simplified Chinese, Traditional Chinese, Japanese, Korean, Thai, Indonesian, Persian, Ukrainian. • Key Lock: To disable all function keys.
When a certain function is selected or activated, your shortcut key may not support. Available function choices for shortcut: Blue Light Filter, Splendid, Brightness, Contrast, Auto Rotation, Input Select, Volume, Color Temp., QuickFit, GamePlus. 8. MyFavorite Loads/Saves all settings on the monitor.
3.2 Specifications summary Panel Type Panel size Max. Resolution Pixel pitch Brightness (Typ.) Contrast Ratio (Typ.) Viewing angle (H/V) CR>10 Display colors Color gamut Response time Splendid Video Enhancement Splendid selection Auto adjustment Color temperature selection Analog input Digital input Earphone jack Speaker (Built-in) Colors Power LED Temperature (Operating) TFT LCD 15.6” (16:9, 39.49 cm) wide screen 1920 x 1080 0.17925 mm 250 cd/m2 1200:1 178˚/178˚ 16.
Compliance and Standards cTUVus, CB, CE, ErP, FCC, RCM, BSMI, VCCI, RoHS, J-MOSS,WEEE, Windows 10 &11 WHQL, TUVLow Blue Light, PC-Recycle, UkrSEPRO, ICES-3, EU Energy Label, VCCI, CU, CCC, KC, KCC, VN MEPS, BIS, TUV-Flicker Free, PSE, CEC, CEL, MEPS, E-Standby *Specifications are subject to change without notice. **Measuring a screen brightness of 200 nits without audio/USB/Card reader connection.
Outline dimensions 3.3 6.2 [0.24] 29.1 [1.14] ASUS MB16ACV Outline Dimension *Unit: mm(inch) 6.2 [0.24] 195.0 [7.68] 23.6 [0.93] 27.0 [1.06] 8.7 [0.34] 193.6 [7.62] 224.8 [8.85] 344.2 [13.55] 345.6 [13.61] 357.9 [14.09] 29.1 [1.14] 6.2 [0.24] 10.5 [0.41] 12.7 [0.50] .00 70 135.9 [5.35] 178.4 [7.
3.4 Troubleshooting (FAQ) Problem Possible Solution Power LED is not ON • Connect to the ASUS adapter and check if the battery is low; if so, charge the battery before using it. • Press and hold the button for 2 seconds to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. The power LED flashes blue and there is no • Check if the monitor and the computer are screen image in the ON mode.
Problem The monitor automatically turns off Poor wireless performance with Windows computer Possible Solution • The monitor automatically turns off when the battery power is zero. Please connect to the ASUS adapter and check if the battery is low; if so, charge the battery before using it. • The monitor automatically turns off after there is no wireless source connection for more than 6 minutes to save power consumption.
3.5 Resolution Frequency 640x480 800x600 1024x768 1280x720 1280x960 1280x1024 1440x900 1680x1050 1920x1080 Supported operating modes Horizontal Frequency (KHz) 31.47(N) 37.88(P) 48.36(N) 45.00(P) 60.00(P) 63.98(P) 55.94(N) 65.29(N) 67.5(P) Vertical Frequency (Hz) 59.94(N) 60.32(P) 60.00(N) 60.00(N) 60.00(N) 60.02(P) 59.89(P) 60.00(P) 60.00(P) Pixel (MHz) 25.18 40 65 74.25 108 108 106.5 146.25 148.5 * “P” / “N” stands for “Positive” / “Negative” polarity of incoming H-sync/V-sync (input timing).
