LED TV Monitor T1 Series User’s Manual E
E4532 Third Edition August 2010 Copyright © 2010 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Contents................................................................................................................... iii Notices ..................................................................................................................... iv Safety Information.................................................................................................... v Care and Cleaning...................................................................................................
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: ▪ This device may not cause harmful interference, and ▪ This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety Information ▪ Before setting up the display, carefully read all the documentation that came with the package. ▪ To prevent fire or shock hazard, never expose the display to rain or moisture. ▪ Never try to open the display cabinet. The dangerous high voltages inside the display may result in serious physical injury. ▪ If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Care and Cleaning ▪ Before you lift or reposition your display, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the display. When lifting or carrying the display, grasp the edges of the display. Do not lift the display by the stand or the cord. ▪ Cleaning. Turn your display off and unplug the power cord. Clean the display surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
Recycling Place EUROPE When disposing of ASUS products in Europe, please contact one of the following locations to make arrangements for recycling. ▪ ASUS France S.A.R.L. 10 allee bienvenue, 93160, noisy le grand, France Tel: +33 1 49 32 96 50 ▪ ASUS COMPUTER GmbH (Germany) Harkortstr.
NORTH AMERICA When disposing of ASUS products in North America, please contact the following locations to make arrangements for recycling. ASUS COMPUTER INTERNATIONAL (America) ▪ US Headquarters: 800 Corporate Way, Fremont, CA 94539, USA Tel: +1 510-739-3777 Fax: +1 510-608-4555 ▪ Canada Branch Office: 802 Cochrane Dr.
________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ __________________________
1.1 Welcome! Thank you for purchasing the ASUS® TV Monitor T1 Series LED display! The latest LED display from ASUS provides a host of features that enhance your viewing experience. It integrates a number of various media input interfaces and a built-in TV tuner to meet your needs on a display for working as well as entertainment. With these features, you can enjoy the convenience and delightful visual experience that the TV Monitor T1 Series is to bring to you! 1.
1.3 Display Introduction 1.3.1 Front view 1. Power button and power indicator ▪ Press this button to turn the display on, off, or stand-by. ▪ The colour of the power indicator is as the below table. Status 2. Blue On Red Stand-by Remote receiver ▪ 2 Description The display receives the signal from the remote controller here.
1.3.2 1. / 4. / Splendid / Auto Adjust / Enter button ▪ To switch among preset Standard, Theatre, Game, and Scenery video modes of Splendid™ Video Enhancement Technology ▪ To automatically adjust the image from VGA input to its optimized parameters by pressing this button for 2 – 3 seconds ▪ To enter/select the icon (function) highlighted while the OSD is activated 2. 3.
5. 6. Volume Down / Down button ▪ To decrease the sound volume ▪ To choose the lower item of the OSD menu ▪ To choose the next mode in Splendid™ mode selection or the next source in Input source selection Volume Up / Up button ▪ To increase the sound volume ▪ To choose the upper item of the OSD menu ▪ To choose the previous mode in Splendid™ mode selection or the previous source in Input source selection 7.
1.3.
1. Power socket and switch to connect power cord and to switch the display on and off 2. VGA connection for PC VGA analogue signal connection 3. Audio-in for PC stereo sound to connect PC audio source 4. Component connection to connect Component (YPbPr) video signal source 5. Audio-in connection to input audio signal through RCA cable 6. SCART connection to connect AV devices 7. HDMI connection for High-Definition Multimedia Interface (HDMI) signal connection 8.
1.4 Remote Controller Introduction Installing the batteries 1. Open the battery compartment cover on the back side. 2. Insert two AAA type batteries in correct polarity (+ to +, - to -). 3. Close the cover. DO NOT mix old or used batteries with new ones. ASUS LED TV Monitor T1 Series ▪ Use the remote controller in front of the remote receiver with a distance shorter than 7 meters and within 30 degree to the left and to the right.
1. Power on or stand-by 2. Set sleep timer 3. Select input signal source 4. Number keys for direct channel access 5. Back to the last channel 6. Display the programme list 7. Previous and next programme; also Teletext page up and down 8. List favourite programmes 9. Volume up, volume down, and mute 10. Menu, exit, , , , and enter 11. Splendid mode selection; also red button 12. Change sound mode; also green button 13. Adjust brightness; also yellow button 14.
2.1 Assembling the Display To assemble the monitor base: 1. Have the front of the display face down on a table. 2. Align the base on the arm to fit it into the arm groove. 3. Fix the base to the arm by fastening the bundled screw. We recommend that you cover the table surface with soft cloth to prevent damage to the display. 2.
2.3 Detaching the arm/base (only for 27T1EH) (For VESA wall mount) The detachable arm/base of this LED monitor is specially designed for VESA wall mount. To detach the arm/base: 1. 2. 3. 4. 5. Have the front of monitor face down on a table. Remove the rubbers in the four screw holes (figure 1). Remove the base (figure 2). Pry the rear hinge cover (figure 3). Use a screwdriver to remove the four screws on the hinge (figure 4), then remove the hinge.
2.4 Connecting the Display For 22T1EH, 24T1EH & 27T1EH PC SCART, S-Video, Composite, & Component D-Sub, HDMI, & Audio-in HDMI & Audio-in AC Power DVD Player, etc ▪ S/PDIF TV Signal (Antenna, Cable, etc) External Stereo Speakers To connect the power cord: connect one end of the power cord securely to the display’s AC input port, the other end to a power outlet.
2.6 Setting the Monitor Set the PC signal to the optimal resolution and frequency for the best picture quality. Resolution Vertical frequency Horizontal frequency Pixel frequency 720 x 400 70Hz 31.47KHz 28.32MHz 640 x 480 60Hz 31.47KHz 25.17MHz 640 x 480 72Hz 37.86KHz 31.50MHz 640 x 480 75Hz 37.50KHz 31.50MHz 800 x 600 56Hz 35.16KHz 36.00MHz 800 x 600 60Hz 37.88KHz 40.00MHz 800 x 600 72Hz 48.08KHz 50.00MHz 800 x 600 75Hz 46.88KHz 49.50MHz 848 x 480 60Hz 31.02KHz 33.
2.7 Setting the Television 1. Press MENU button either on the keypad of the display or on the remote buttons to select “Programme”. controller and use, , , , and 2. Select “Auto Programme” and choose the country of the broadcasting system. 3. Select “Start” to scan all the available channels and store them in the memory. ▪ For further information of setting the TV, please read chapter 3.1.2.
2.8 Using Teletext You can control the Teletext functions only by the remote controller. The keypad on the display does not provide such functions. Press TTX button to display Teletext. Press it again or EXIT button to switch off Teletext. 1. 2. 3. 14 SIMPLE Text ▪ Enter the three-digit page number with the number buttons to display your desired page. ▪ Press or to display the preceding or the following page.
2.9 Electronic Programme Guide (EPG) This EPG information is transmitted by the broadcaster and may not be available in some countries or regions. You can control EPG functions only by the remote controller. The keypad on the display does not provide such functions. Press EPG button to display Electronic Programme Guide. The programme information along the time axis will be displayed. You can scroll the time axis forward and backward to see more information.
3.1 3.1.1 On-Screen Display (OSD) Menu How to reconfigure 1. Press MENU button either on the keypad of the display or on the remote controller to activate the OSD menu. 2. Use , , , and to navigate through the functions. The chosen function will be highlighted. To activate the chosen function, press ENTER button. If the selected function has a sub-menu, still use , , , and to navigate through the sub-menu functions.
- Game: best choice for game playing with Splendid™ Video Intelligence Technology. - Scenery: best choice for scenery photo display with Splendid™ Video Intelligence Technology. ▪ Contrast: to adjust the contrast of the displayed picture. ▪ Brightness: to adjust the luminance of the display. ▪ Colour: to adjust the colour of the displayed picture deeper or paler; this function is active only in Standard Splendid™ mode and when VGA input is not in use.
2. Sound ▪ 18 Sound Mode: to switch among Vocal, Rock, Soft, Boom, and Standard sound modes. - Vocal: to emphasize the human voice for news report or speech. - Rock: to emphasize bass and treble for rock music. - Soft: to slightly increase bass and treble for soft music. - Boom: to emphasize low tone for fighting games. - Standard: to adjust the equalizer to define your preferred sound effect. ▪ Treble: to adjust the sound treble of the speakers to your preferred levels.
3. Programme - This function is to set the TV channels and programmes. ▪ Auto Programme: choose the country of the broadcasting system and then select “Start” to scan all the available channels and store them in the memory. ▪ Time Zone: to specify your time zone. ▪ Manual Scan: to manually set the programme list. - DTV Manual Tuning: to manually set the programme list of digital broadcasts. You need to specify the channel number of UHF or VHF band and then let the system search the signal.
▪ Programme Edit: to edit the programme list. You can use the buttons to move the highlighted item. For DTV: You can press the blue button to skip the channel. The function will be deactivated by pressing the same button again. The red button is to delete the channel from the programme list. The display will ask for your confirmation for selecting this function. For ATV: You can press the blue button to skip the channel. The function will be deactivated by pressing the same button again.
▪ Audio Language: to select your preferred language for audio. You can also select audio language with the I / II button on the remote controller when more than one audio language is broadcasted. ▪ Subtitle Language: to select your preferred language when more than one subtitle language is broadcasted. You can also select subtitle language with button on the remote controller. the SUB.T ▪ CI Information: to display the information of your CAM, Conditional Access Module, in the CI card slot.
You will see the icon if the broadcast has the assistance function for visual and hearing impaired people. icon if the broadcast has the assistance function for You will see the visual and hearing impaired people. This function is only available for digital broadcasts. ▪ Sleep: to set a countdown of 15, 30, 45, 60, 90, 120 minutes till the display automatically switches off. Select Off to turn off this function.
▪ - Auto: to automatically select the screen aspect ratio according to the broadcasting signal - Panorama: to fit the 4:3 signal into the 16:9 wide screen by keeping the centre of the picture in the same aspect ratio and stretching the both sides more - Zoom1: to stretch the centre of 2.35:1 pictures to the top and bottom of the screen and leave the left and right sides of the picture outside the screen being un-displayed - Zoom2: to stretch the centre of 1.
3.2 1. Specifications Summary 22T1EH Panel Type Panel Size Viewing Area Max Resolution Pixel Pitch Luminance Contrast Ratio Viewing Angle (H/V) Display Colours Colour Gamut Synchronization Frequency Max. Pixel Frequency Signal Connectors TV System Colour System Channel Coverage Speakers Power LED Tilt Power Requirement Power Consumption Environmental Conditions Dimensions (W x H x D) Weight VESA Wall-Mount Accessories Regulation Approvals * 24 White Light Emitting Diode Display (WLED) 21.5” (54.
2. 24T1EH Panel Type Panel Size Viewing Area Max Resolution Pixel Pitch Luminance Contrast Ratio Viewing Angle (H/V) Display Colours Colour Gamut Synchronization Frequency Max. Pixel Frequency Signal Connectors TV System Colour System Channel Coverage Speakers Power LED Tilt Power Requirement Power Consumption Environmental Conditions Dimensions (W x H x D) Weight VESA Wall-Mount Accessories Regulation Approvals * White Light Emitting Diode Display (WLED) 23.
3. 27T1EH Panel Type Panel Size Viewing Area Max Resolution Pixel Pitch Luminance Contrast Ratio Viewing Angle (H/V) Display Colours Colour Gamut Synchronization Frequency Max. Pixel Frequency Signal Connectors TV System Colour System Channel Coverage Speakers Power LED Tilt Power Requirement Power Consumption Environmental Conditions Dimensions (W x H x D) Weight VESA Wall-Mount Accessories Regulation Approvals * 26 White Light Emitting Diode Display (WLED) 27” (68.9cm, 16:9) wide screen 600.
3.
________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ ________________________________________________________________________________ __________________________