Installation Guide

ManualsBrandsAsus ManualsAll-in-One PCsASUS A4110

Preloading the USB 2.0/3.0 drivers for Windows

7 installation

Preload the USB 2.0/3.0 drivers to be able to use the keyboard and mouse during the Windows

installation. The following steps will guide you in preloading the USB 2.0/3.0 drivers and installing

Windows

E11449 / First Edition / March 2016

All-in-One PC

Windows

7 and USB 2.0/3.0 Drivers

Installation Guide

Preloading/Installing using ASUS EZ Installer

1. Ensure that you have the following:

• ASUS support DVD (included with your ASUS All-in-One PC package)

• Windows

7 installation DVD

• DesktoporNotebookPC(withwindowsOSenvironment)*

• ASUSAll-in-OnePC(withIntel

SkylakeorBraswellCPU)**

• USBstoragedevice(with8GBormorecapacity)

• Internal/External Optical Disk Drive (ODD)

NOTE:

•*UseyourDesktoporNotebookPCforsteps2to4.

•**UseyourASUSAll-in-OnePCforsteps5to9.

2. InserttheASUSSupportDVDintotheODDofyourDesktoporNotebookPC.Fromthe

Support DVD, install ASUS EZ Installer.

NOTE:

ConnectanexternalODDifyourDesktoporNotebookPCdoesnothaveaninternalODD.

3. Remove the ASUS Support DVD and insert the Windows

7 installation DVD,

launch ASUS

EZInstaller.

4. SelectanyofthesetwomethodstocreateamodiedWindows

7installationle:

• Windows

7 OS disk to USB storage device

• Windows

7OSdisktoISOle

NOTE:

RefertothenextsectionsforthestepstocreateamodiedWindows

7installationle.

15060-78600000

Summary of content (6 pages)

PAGE 1
All-in-One PC Windows® 7 and USB 2.0/3.0 Drivers Installation Guide Preloading the USB 2.0/3.0 drivers for Windows® 7 installation Preload the USB 2.0/3.0 drivers to be able to use the keyboard and mouse during the Windows® 7 installation. The following steps will guide you in preloading the USB 2.0/3.0 drivers and installing Windows® 7. Preloading/Installing using ASUS EZ Installer 1.
PAGE 2
Windows® 7 OS disk to USB storage device a) Select Windows 7 OS disk to USB storage device then click Next. b) Check I agree and then click Next. c) Select the source of the Windows® 7 installation disk then click Next.
PAGE 3
d) Select the USB storage device and click next. NOTE: Click the refresh icon e) if the USB storage device is not displayed. Click Yes to clear the contents on the USB storage device and create a bootable USB device. NOTE: The USB storage device will be formatted, so ensure that you have backed up your data from it. f) Once completed, click OK to finish. Windows® 7 OS disk to ISO file a) Select Windows 7 OS disk to ISO file then click Next.
PAGE 4
b) Check I agree and then click Next. c) Select the source of the Windows® 7 installation disk then click Next. d) Select the folder to save the modified Windows® 7 installation ISO file and click Next. e) Once completed, click OK to finish. f) Burn this ISO file onto an empty DVD to create a modified Windows® 7 installation DVD.
PAGE 5
. In your ASUS All-in-One PC, insert the modified Windows® 7 installation DVD into an external ODD or connect the USB storage device with modified Windows® 7 installation files. 6. Power on your ASUS All-in-One PC and press [F8] during POST (Power-On Self Test) to enter the boot screen. 7. Select the ODD or USB storage device as the boot device. 8. The USB 2.0/3.0 driver is loaded automatically during installation startup. 9.
PAGE 6