AP1720-E2 Intel® XeonTM 800/533MHz 5U
T1855 1.01 2004 11 © 2004 1) 2) 1.22 BIOS 2 1.24 ...
..................................................................................... 6 ............................................................................................. 7 ................................................................................. 8 ......................................................... 9 1.1 1.2 1.3 1.4 1.5 1.6 LED 2.1 2.1.1 2.1.2 2.2 2.3 2.3.1 2.3.2 2.3.3 2.4 2.4.1 2.4.2 2.4.3 2.4.4 2.5 2.5.1 2.5.2 2.6 5.25 2.7 2.7.1 2.7.2 2.8 ........................................
2.8.1 2.8.2 2.8.3 ..................................................... 2-26 ..................................................... 2-28 ......................................................................... 2-29 2.9 ....................................................................................... 2-30 2.9.1 ................................................................. 2-30 2.9.2 SATA AA4 ............................ 2-31 2.9.3 SCSI ..............................................................
.2.1 BIOS ........................................................... 5-9 5.2.2 ............................................................. 5-9 5.2.3 ................................................................. 5-9 5.2.4 ..................................................................... 5-10 5.2.5 ................................................................................. 5-10 5.2.6 ..................................................................................... 5-10 5.2.7 ............
IC 6
UPS IC AP1720-E2 7
AP1720-E2 AP1720-E2 step-by-step AP1720-E2 AP1720-E2 Jumper BIOS AP1720-E2 8 BIOS
1. http://tw.asus.com 2.
15 886-2-2894-3447 0800-093-456 6 AM 9 00 ~ PM 12 30 PM 1 30 ~ PM 6 00 886-2-2890-7698 http://tw.asus.com/ 44370 Nobel Drive, Fremont, CA 94538, USA +1-502-995-0883 +1-502-933-8713 tmdl@asus.com +1-502-995-0883 +1-502-933-8713 tsd@asus.com http://usa.asus.com Harkort Str. 25, D-40880 Ratingen, Germany +49-2102-95990 +49-2102-959911 http://www.asuscom.de http://www.asuscom.de/sales +49-2102-95990 ... / +49-2102-959910 .. +49-2102-959911 http://www.asuscom.
AP1720-E2
1.1 1.
1.
1.3 AP1720-E2 LED 5.25 AP1720-E2 5.25 CD-ROM 2 5.
AP1720-E2 1-5
1.
1.5 AP1720-E2 2 1 3 5 4 7 10 9 6 8 1. 6. 2. CD-ROM 7. NCCH-DL 3. 2 8. 5.25 4. 9. 5. 10.
2 1 3 5 11 12 10 4 7 9 6 8 11 13 14 1-8
11 13 14 16 15 1. 10. 2. CD-ROM 11. 3. 2 12. SATA 5.25 17 4. 13. SCSI 5. 14. ASUS U160/U320 SCSI 6. 15. 7. NCCH-DL 16. 8. 17. 9.
1.6 LED AP1720-E2 LED ! LED Suspend / OFF ASMS RAID card SAF-TE* / * SAF-TE SCSI Access Fault-Tolerant AS4/AS8 HDD AA4 1. 2.
AP1720-E2
2.1 AP1720-E2 2.1.1 1. 1 2.
1.5 CPU CPU DIMM 2-10 2.1.2 1 1. 2. 2 3.
2.
2.3 CPU 2.3.1 604 Xeon 604 ZIF ® NCCH-DL Intel Xeon Gold Arrow NCCH-DL Socket 604 2-10 2.3.
1. 604-pin CPU1 2. 3. 4. 5. 6.
2.3.3 CPU AP1720-E2 Intel® Xeon™ Intel CPU FSB 533MHz Intel Xeon FSB 533MHz Intel Xeon Intel Xeon FSB Nocona 800MHz 1. 2. CPU CPU-FAN1 CPU_FAN2 CPU 3.
CPU 1. CPU CPU CEK CPU 2. 4 2 1 3 3.
4.
2.4 2.4.1 DIMM_B2 80 Pins non ECC 104 Pins ® NCCH-DL DIMM_A1 DIMM_A2 Double Data Rate 4GB unbuffer ECC 184-pin PC3200/2700/2100 DDR DIMM DIMM_B1 DDR DIMM NCCH-DL 184-pin DDR DIMM sockets 2.4.2 512MB 1GB unbuffer ECC / non ECC 184-pin 2GB DDR DIMM 1. DDR 1 2. 3. CL CAS-Latency 4. 2 5. 6.
DIMM_A1 DIMM_A2 DIMM_B1 DIMM_B2 (1) (2) (3) (4) (1) (2) (3) * * DIMM_B1 DIMM_A2 DIMM_A1 DIMM_B2 / CPU CPU DDR DDR 800MHz PC3200 400 MHz 533MHz PC2700 333 MHz 400MHz PC2100 266 MHz tw.asus.
2.4.3 DIMM 2.10 1. 2. DDR 3. DDR 2.4.3 1. 2.
2.5 2.5.1 5.25 1. 2.
3.
2.5.2 1. 2.
2.6 5.25 AC 5.25 1 2 1 3 2 3 5.25 1. 2. 2-16 5.
3. 4. 5.25 5. IDE IDE 6.
7. 8. 9. 5.25 10. 2-18 2.5.
2.7 2.7.1 SATA SATA/SCSI AS8 SCSI AS4 AA4 1. 2. 3. 4.
5. 6. 7.
2.7.2 IDE IDE/SATA AI4 1 2 Rail 1 Rail 2 1 3 2 1 4 2 : 1. 2. 2.5.
3. 2 1 4. Cable Select 5. 6. 7. IDE 8. 2 9.
SATA ATA 1. 2. 3. IDE Serial ATA 1~6 15-pin SATA SATA 4.
IDE/SATA IDE SATA 1. 2. 1~4 3. 4. IDE 5. 2~4 6. 2.1.
1. 2. 3.
2.8 2.8.1 1. 2.
3.
2.8.2 RAID AS4 AA4 AI4 1. 2. 3. PCI 4. 5.
2.8.3 1. 2. 3.
2.9 2.9.1 1 9 2 8 3 10 11 1. 2. 3. 4. 5. 6. 2-30 8-pin 12V AUX 24-pin ATX Primary IDE Secondary IDE 4 5 7. 8. 9. 10. 11.
2.9.2 SATA pin AA4 AP1720-E2 AA4 SATA SATA 15- SATA SATA SATA 1.
SATA RAID SATA SMBus lower 6-1 SMB SMBus pins SMBus upper 6-1 pins CON8 CON6 CON4 CON2 SMB SATA SATA SATA SATA RAID 2-32 CON2 SATA_RAID1 Promise PDC20319 CON4 SATA_RAID2 Promise PDC20319 CON6 SATA_RAID3 Promise PDC20319 CON8 SATA_RAID4 Promise PDC20319 SATA_RAID4 SATA_RAID3 SATA_RAID2 SATA_RAID1
SATA ID 6-pin SATA J1 J1 1-3 J1 SATA 1-3 2-4 2-4 ID SATA 1 CON1 2 CON2 3 CON4 4 CON6 AP1720-E2 ID 2-33
2.9.
SCSI SCSI SCSI SMBus SCSI SCSI SCSI SCSI SCSI SCSI SCSI SCSI terminator SCSI SCSI SMBus SCSI upper 6-1 pins SMB SMBus SMB lower 6-1 pins SCSI 68-pin SCSI SCSI 68-pin SCSI AP1720-E2 2-35
SCSI SCSI : SCSI SCSI SCSI SCSI SCSI SCSI terminator 7 SCSI SCSI SCSI SCSI SMBus upper 6-1 pins SMB SMBus lower 6-1 pins SCSI SMB 68-pin SCSI SCSI 68-pin SCSI SCSI SCSI SCSI SMBus upper 6-1 pins SMB SMBus lower 6-1 pins SCSI SMB 68-pin SCSI SCSI 68-pin SCSI terminator SCSI ID 6-pin J1 2-36 J1 SCSI 1-3 2-4
SCSI BPB1 J1 1-3 ID BPB2 2-4 J1 SCSI 3-5 4-6 ID SCSI 1 ID0 5 ID4 2 ID1 6 ID5 3 ID2 7 ID6 4 ID3 8 ID8 ID15 GEM 318 SAF-TE ID11 GEM SAF-TE SCSI RAID SCSI SCSI ID RAID SCSI : SCSI SCSI SCSI SCSI SCSI SCSI terminator SCSI SMBus upper 6-1 pins SMB SMBus SMB lower 6-1 pins SCSI 68-pin SCSI SCSI 68-pin SCSI terminator AP1720-E2 2-37
SCSI SMBus upper 6-1 pins SMB SMBus lower 6-1 pins SCSI SMB 68-pin SCSI SCSI 68-pin SCSI terminator SCSI ID 6-pin J1 J1 SCSI 1-3 2-4 BPB1 J1 1-3 BPB2 2-4 SCSI 3-5 4-6 SCSI 1 ID0 5 ID0 2 ID1 6 ID1 3 ID2 7 ID2 4 ID3 8 GEM 318 SAF-TE ID15 SCSI Channel-0 non-cascable 2-38 J1 ID GEM 318 SAF-TE ID ID3 ID15 SCSI Channel-1 SCSI
2.10 1. 2. 3. 4. 5. 6. 7. SATA/SCSI / 2.10.1 1. SYSTEM_FAN 3-pin 2. 3.
3. 1. 2.
3. 4. 3-pin REAR_FAN1 2.10.2 1. 2. 3.
4. 5. 6. 1.
1. 3-pin SCSI 2. 3. 4.
2.10.3 SATA/SCSI SATA/SCSI 1. 2.10.2 Blower 2. 3. 4.
SATA/SCSI 1. SATA/SCSI 2. 3. 4. 2. 9.2 SATA 2.9.
2.10.4 2.5.1 1. 2. 3.
1. 2. 1 3. 4.
2.10.5 / / 2.5.1 / 1. 2. / / 3. 4.
/ 1. 2. / / IEEE 1394 3. / 4.
2.10.6 1. 2. 3.
1. 2. 3 1 2 4 3. 4. 2 3 1. 2.
2.10.7 600W 110/220V 2 3 300W 110/220V 300W 110/220V 600W AC 4 2 3 1 6 1. 2. 3. 4. 5. 6.
600W 1. 2. 3.
600W 1. 2. 3. 4. 5.
600W 1. 2. 3. 600W 4.
2. 3.
AP1720-E2
3.1 SCSI 1. Introduction 4 8 SCSI SCSI AS8 AS4 AS4 AS8 SCSI 1. 2.
3. 4. 5.
6. 7. 8.
3.2 4 IDE SCSI / 4 4 4 IDE SCSI AS4 4 SCSI SCSI / 4 IDE IDE 1. 2.
3. 4.
3.3 600W 1. 600W 2.10 2. 3. 4.
5. 6. 7.
3.4 600W 1. 2. 3.
4. 5.
3.5 3.5.1 1. 2.5.1 2. 2.5.1 3. 4. 3.5.
3-12
4.1 1. Introduction 25cm (9.8in) ATX12V1 PS/2KBMS T: Mouse B: Keyboard mPGA 604 CPU_FAN2 FM_CPU2 USBPW12 USBPW34 Top:Line In Center:Line Out Below:Mic In Intel 82875P Canterwood 30.5cm (12in) USB2.
1. Keyboard power 2. RAID controller setting 3. USB device wake-up 4. CPU external frequency setting 5. Clear RTC RAM 6. IEEE 1394 setting 7. CPU fan pin selection 1. Floppy disk connector 2. Serial ATA connectors 3. IDE connectors 4. GAME / MIDI connector 5. IEEE 1394 connector 6. Chassis intrusion connector 7. Serial ATA RAID connector 8. Backplane SMBus connector 9. Power connectors 10.Hard disk activity LED connector 11.Front panel audio connector 12.Internal audio connectors 13.
4.2 1. (3-pin KBPWR1) KBPWR1 +5VSB [2-3] 1A/+5VSB BIOS KBPWR1 2 3 +5V (Default) ® NCCH-DL 1 2 +5VSB NCCH-DL Keyboard power setting 2.
3. USB 3-pin USBPW12, USBPW34 +5V USB +5VSB S1 S3 S4 USB +5V [1-2] USBPW12 3 2 +5VSB ® NCCH-DL 2 1 +5V (Default) USBPW34 3 2 2 1 +5V (Default) +5VSB NCCH-DL USB device wake up 1. USB +5VSB 500mA/+5VSB 2. +5VSB 4.
5.
6. CPU (3-pin FM_CPU1, FM_CPU2) 3-pin CPU_FAN1, CPU_FAN2 4-pin 4-pin [1-2] [3-4] 4-pin FM_CPU1 1 2 3 1 2 3 4-pin Fan (Force to 12V) FM_CPU2 ® NCCH-DL 3-pin Fan (DC Mode) 1 2 3 1 2 3 3-pin Fan (DC Mode) 4-pin Fan (Force to 12V) NCCH-DL USB CPU fan pin selection 7.
4.3 34-1 pin FLOPPY1 FLOPPY 1 ® NCCH-DL 1. PIN 1 NOTE: Orient the red markings on the floppy ribbon cable to PIN 1. Pin 1 NCCH-DL Floppy disk drive connector 2.
3. IDE 40-1 pin PRI_IDE IDE UltraDMA/100/66 IDE ( CD-ROM ZIP IDE Master 1. , SEC_IDE IDE MO ) Slave Master Slave 2. IDE UltraDMA ® NCCH-DL PRI_IDE PIN 1 SEC_IDE PIN 1 NOTE: Orient the red markings (usually zigzag) on the IDE ribbon cable to pin 1. Pin 1 NCCH-DL IDE connectors /MIDI 16-1 pin GAME1 /MIDI USB 2.0/ /MIDI /MIDI +5V J1B2 J1CY GND GND J1CX J1B1 +5V ® MIDI NCCH-DL GAME1 NCCH-DL Game connector MIDI_IN J2B2 J2CY MIDI_OUT J2CX J2B1 +5V 4.
5.IEEE 1394 10-1 pin IEEE1394_1 10-1 pin 1394 1394 TPA0GND TPB0+12V GND ® NCCH-DL 10-1 pin 1394 1 NCCH-DL IEEE-1394 connector 6.
7. ATA SATA_RAID2) (7-pin SATA_RAID1, Promise 20378 RAID SATA_RAID1, SATA_RAID2 PRI_RAID1 RAID 0 RAID 1 RAID 0+1 4-17 GND RSATA_RXP1 RSATA_RXN1 GND RSATA_TXN1 RSATA_TXP1 GND GND RSATA_RXP2 RSATA_RXN2 GND RSATA_TXN2 RSATA_TXP2 GND SATA_RAID3 SATA_RAID4 ® NCCH-DL GND RSATA_TXP1 RSATA_TXN1 GND RSATA_RXN1 RSATA_RXP1 GND GND RSATA_TXP2 RSATA_TXN2 GND RSATA_RXN2 RSATA_RXP2 GND SATA_RAID1 SATA_RAID2 NCCH-DL SATA RAID connectors 8.
9. SSI 24-pin ATXPWR, 8-pin ATX12V ATX +12V 24 ATXPWR +12V 3. 8-pin+12V Intel Xeon 800MHz 27A +5V +5VSB 600W NCCH-DL ATX power connectors 10. IDE 8-pin power connector For power supply with 20-pin power connector 2-pin IDELED1 IDE_LED IDE 4-12 1 12V1 12V1 12V2 12V2 Ground Ground Ground PSON# Ground -12V +3V +5V +5V -5V +12V3 +5V Standby Power OK Ground +5V Ground +5V Ground +3V +3V +3V +12V3 ® NCCH-DL Ground +5V 24-pin power connector +12V GND GND GND GND 1. 2.
11. 10-1 pin FP_AUDIO1 Intel / FP_AUDIO1 ® NCCH-DL BLINE_OUT_R LINE_OUT_R/ LINE_OUT_L/BLINE_OUT_L BLINE_OUT_L BLINE_OUT_R +5VA AGND Line out_L NC Line out_R MICPWR MIC2 NCCH-DL Front panel audio connector 12.
13. / / (4-pin CHA_FAN1/2, 3-pin REAR_FAN1/2, 3-pin FRNT_FAN1/2 ~4.44 350mA~740mA 53.28 8.88W 2.1 +12 +12V GND 3-pin REAR_FAN1 4-pin CPU_FAN1 CPU_FAN1 CPU_FAN2 Rotation +12V GND Rotation +12V GND NCCH-DL Fan connectors Rotation +12V GND PWM Control FAN Speed FAN Power GND REAR_FAN2 FRNT_FAN2 REAR_FAN2 14.
• • • • IDE_LED IDE IDE • BIOS • Reset • Green AP1720-E2 4-15
4-16
BIOS BIOS BIOS
5.1 BIOS 1. BIOS 2. BIOS BIOS 5.1.1 1. 1.44MB DOS a. Windows b. c. d. 2. 5-2 1.
5.1.2 BIOS DOS AWDFLASH.EXE 1. tw.asus.com ( BIOS BIOS .BIN) BIOS BIOS 2. AwardBIOS awdflash.exe BIOS 3. 4. 5. DOS A:> awdflash < Enter > AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.
6. BIOS File Name to Program Enter > AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.3V 06/01/2004 File Name to Program : 1001.bin Message: Do You Want To Save BIOS (Y/N) 7. BIOS BIOS 8. BIOS AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.3V 06/01/2004 File Name to Program : 1001.
9. Flash Complete < F1 > AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.3V 06/01/2004 File Name to Program : 1001.bin Flashing Complete Press to Continue Write OK F1 Reset 123 123 123 No Update 12 12 12 Write Fail BIOS AwardBIOS BIOS BIOS BIOS BIOS BIOS 1. 1 2. 6 BIOS AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd.
3. BIOS < Enter > AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.3V 06/01/2004 File Name to Program : 1001.bin Checksum : DAD6H Save current BIOS as : old.bin Message: Please Wait! 4. BIOS BIOS AwardBIOS Flash Utility for ASUS V1.06 (C) Phoenix Technologies Ltd. All Rights Reserved For Canterwood - NCCH-DL DATE: Flash Type - SST 49LF004A/B /3.3V 06/01/2004 File Name to Program : 1001.
5.1.3 EZ Flash BIOS EZ Flash BIOS DOS BIOS On Self Test Flash EZ Flash 1. POST EZ Flash Alt + F2 PowerEZ BIOS tw.asus.com BIOS 2. 3. F2 POST EZ Flash Alt + EZFlash starting BIOS update Checking for floppy... 4. BIOS EZ Flash BIOS Floppy not found BIOS NCCH-DL.ROM not BIOS found NCCH-DL.ROM EZFlash starting BIOS update Checking for floppy... Floppy found! Reading file “NCCH-DL.rom”. Completed. Start erasing.......| Start programming...| Flashed successfully. Rebooting.
5.2 BIOS BIOS Basic Input and Output System BIOS BIOS BIOS RUN SETUP BIOS BIOS Flash ROM BIOS Flash ROM BIOS BIOS BIOS C M O S RAM BIOS POST Power-On Self Test DELETE DELETE RESET Ctrl + Alt + Delete BIOS BIOS BIOS 5.
5.2.1 BIOS Time (hh:mm:ss) Date (mm:dd:yy) 11: 10 : 30 Wed, Jun 30 2004 Legacy Diskette A Floppy 3 Mode Support [1.44M, 3.5 in.] [Disabled] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master [None] [None] [None] [None] [None] [None] Base Memory Extended Memory Total Memory 640K 261120K 26114K Select Menu Item Specific Help Change the day, month, year and century. 5.2.2 BIOS Main Advanced Power Boot Exit BIOS 5.2.
5.2.4 5.2.5 Enter 5.2.6 5.2.
5.3 Main Menu BIOS 5.2.1 BIOS Time (hh:mm:ss) Date (mm:dd:yy) Select Menu 11: 10 : 30 Wed, Jun 30 2004 Legacy Diskette A Floppy 3 Mode Support [1.44M, 3.5 in.] [Disabled] Primary IDE Master Primary IDE Slave Secondary IDE Master Secondary IDE Slave Third IDE Master Fourth IDE Master [None] [None] [None] [None] [None] [None] Base Memory Extended Memory Total Memory 640K 261120K 26114K Item Specific Help Change the day, month, year and century.
Base/Extended/Total Memory [xxxK] Base/Extended/Total Memory 5.3.1 Primary IDE Master Primary Master Primary IDE Master Access Mode Capacity Cylinder Head Precomp Landing Zone Sector PIO Mode UDMA Mode Transfer Mode S.M.A.R.T Status Select Menu [Auto] [Auto] 0 MB 0 0 0 0 0 [Auto] [Auto] None None Item Specific Help Selects the type of fixed disk connected to the system. [Manual] lets you select the number of cylinders, heads, etc. Note: PRECOMP-65535 means NONE.
Access Mode [Auto] [Auto] [Auto] IDE [CHS] [LBA] [Large] IDE IDE Master Access Mode [Auto] [IDE Channel 0/1 Master/Slave] [CHS] Primary [Manual] PIO Mode PIO 0 4 [Mode 0] [Mode 1] [Mode 2] [Mode 3] [Mode 4] UDMA Mode [Auto] UDMA [Disable] [Auto] AP1720-E2 IDE 5-13
Manual detecting an IDE drive [Manual] [IDE Primary Master] [CHS] [Access Mode] Primary Master Primary IDE Master Access Mode Select Menu [Manual] [CHS] Capacity 0 MB Cylinder Head Precomp Landing Zone Sector PIO Mode UDMA Mode Transfer Mode S.M.A.R.T. Status 0 0 0 0 0 [Auto] [Auto] None None Item Specific Help Selects the type of fixed disk connected to the system. [Manual] lets you select the number of cylinders, heads, etc. Note: PRECOMP=65535 means NONE.
Precomp Landing Zone BIOS Sector Sector Transfer Mode [None] S.M.A.R.T. Status Smart Monitoring, Analysis, and Reporting Techology [None] IDE Primary IDE FDISK Active 5.3.2 Primary IDE Slave IDE Primary IDE 5.3.1 Primary IDE Master Slave 5.3.3 Secondary IDE Master IDE Primary IDE 5.3.1 Primary IDE Master Master 5.3.4 Secondary IDE Slave IDE Primary IDE 5.3.
5.3.5 Third IDE Master IDE Master 4.3.1 Primary IDE Master Primary Master Extended IDE Drive Access Mode Select Menu [Auto] [Auto] Capacity 0 MB Cylinder Head Precomp Landing Zone Sector Transfer Mode S.M.A.R.T Status 0 0 0 0 0 Item Specific Help Selects the type of fixed disk connected to the system. None None Extended IDE Drive [Auto] [Auto] [None] IDE [None] [Auto] Access Mode [Auto] [Large] [Auto] 5.3.6 Fourth IDE Master Primary IDE Master IDE Master 4.3.5 Third Master 4.3.
5.4 Advanced Menu Select Menu Advanced BIOS Features CPU Configuration Memory Configuration Chipset Onboard Device PCIPnP USB Configuration 5.4.1 Item Specific Help Press Enter to set. BIOS Advanced BIOS Features Chipset Vcore Voltage DRAM Vcore Voltage [+1.6V] [+2.6V] Select Menu Item Specific Help Press [ENTER] to adjust Chipset Vcrore voltage.
Chipset Vcore Voltage [+1.6V] [+1.5V] [+1.6V] [+1.7V] [+1.8V] DRAM Vcore Voltage [+2.6V] [+2.8V] [+2.7V] [+2.8V] 5.4.2 CPU CPU CPU Configuration CPU L1 & L2 Cache Hyper-Threading Technology Select Menu Item Specific Help [Enabled] [Enabled] Disable/Enable CPU L1/ L2 cache. CPU L1 & L2 Cache [Enabled] L1 L2 [Disabled] [Enabled] Hyper-Threading Technology [Enabled] Hyper-Threading Linux kernel 2.
5.4.3 Memory Configuration DRAM Frequency Memory Timing Selectable Cache Latency Time Active to Precharge Delay DRAM RAS# to CAS# Delay DRAM RAS# Precharge Memory Parity Check Select Menu Item Specific Help [Auto] [By SPD] 2 6 3 3 Enabled Set DRAM Frequency.
DRAM RAS# to CAS# Delay [3] DRAM / [4] [3] [2] DRAM RAS# Precharge [3] SDRAM Precharge [4] [3] [2] Memory Parity Check [Enabled] ECC [Disabled] [Enabled] 5.4.4 Chipset AGP Bridge Configuration Frequency/Voltage Control System BIOS Cacheable Video BIOS Cacheable Init Display First Auto Detect PCI Clk Spread Spectrum Select Menu Item Specific Help [Enabled] [Disabled] [AGP Slot] [Enabled] [+/- 0.50%] Press Enter to set.
Init Display First [AGP Slot] [PCI VGA Card] [AGP Slot] Auto Detect PCI Clock [Enabled] PCI [Enabled] [Disabled] Spread Spectrum [-0.5%] [Disabled] [+/-0.1%] [+/-0.2%] [+/-0.3%] [+/-0.4%] [+/-0.5%] [+/-0.6%] [+/-0.7%] [+/-0.8%] [+/-0.9%] [+/-1.0%] AGP Bridge Configuration AGP Bridge Configuration AGP Aperture Size [128] Select Menu Item Specific Help Size of the AGP Aperture.
Frequency/Voltage Control Frequency/Voltage Control CPU Clock CPU Clock Ratio [200MHz] [14 X] Select Menu Item Specific Help Set CPU Frequency.
5.4.5 Onboard Device Speech IC Reporter Report IDE Error Report System Booting Onboard AC97 Audio CSA LAN (Giga-LAN) Onboard LAN Boot ROM Oboard 1394 Chip Onboard Promise Controller Select Menu [Enabled] [Disabled] [Disabled] [Auto] [Enabled] [Disabled] [Enabled] [Enabled] Item Specific Help Enable/Disable Onboard CSA LAN device boot ROM support.
Onboard LAN Boot ROM [Enabled] [Disabled] [Enabled] Onboard TI1394 [Enabled] IEEE 1394 [Disabled] [Enabled] Onboard Promise Controller [Enabled] Promise RAID [Disabled] [Enabled] Operating Mode [IDE] RAID [Onboard Promise Controller] [IDE] [RAID] [Enabled] SuperIO Device SuperIO Device Serial Port1 Address Serial Port2 Address Onboard Parallel Port Parallel Port Mode EPP Mode Select ECP Mode Use DMA [3F8/IRQ4] [2F8/IRQ3] [378/IRQ7] [SPP] EPP1.
Onboard Parallel Port [378/IRQ7] [Disabled] [378/IRQ7] [278/IRQ5] [3BC/IRQ7] Parallel Port Mode [SPP] [SPP] [EPP] [ECP] [ECP+EPP] [Normal] EPP Mode Select [EPP1.7] [EPP] [EPP 1.9] EPP [ECP+EPP] [Parallel Port Mode] [EPP 1.
SATA Configuration SATA Configuration Select Menu Item Specific Help *** On-Chip Serial ATA Setting *** On-Chip Serial ATA [Auto] SATA Mode IDE Serial ATA Port0 Mode SATA0 master Serial ATA Port1 Mode SATA1 master ** [Disabled]: Disable SATA Controller. [Auto]: Auto-arrange the BIOS. [Combined Mode]: PATA and SATA are combined. Max. of 2 IDE drives on each channel. [Enhanced Mode]: Enable both SATA and PATA. Max. of 6 IDE drives are supported. [SATA Only]: SATA is opeating in legacy mode.
1. [Enhanced Mode] Windows 2000/XP 2. d. e.
5.4.6 PnP/PCI PNP/ PCI PCIPnP Select Menu Reset Configuration Data [Disabled] Item Specific Help Resources Controlled By IRQ Resources [Auto] PCI/VGA INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin INT Pin [Disabled] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] [Auto] Default is Disabled.
INT Pin 1~8 Assignment [Auto] [Auto] [3] [4] [5] [7] [9] [10] [11] [12] [14] [15] IRQ Resources Resources Controlled By PCI [Manual] IRQ IRQ PCIPnP Select Menu Reset Configuration Data [Disabled] Item Specific Help Resources Controlled By IRQ Resources [Manual] PCI/VGA INT Pin INT Pin INT Pin INT Pin [Disabled] [Auto] [Auto] [Auto] [Auto] When resources are controlled manually, assign each system interrupt a type depending on the type of device using the interrupt.
5.4.7 USB USB USB Configuration USB Controller USB 2.0 Support USB Legacy Mode Support Select Menu Item Specific Help [Enabled] [Enabled] [Enabled] Configures the USB controller. USB Controller [Enabled] USB [Disabled] [Enabled] USB 2.
5.5 Power Menu ACPI APIC Support ACPI Suspend Type APM Configuration Hardware Configuration Select Menu [Enabled] [S1&S3] Item Specific Help Enable/Disable ACPI support for Operating System.
5.5.
Video Off Method [DPMS] (Display Power Management System DPMS DPMS) BIOS [Blank Screen] Green PC [DPMS] [Blank Screen] [V/H SYNC+Blank] Video Off In Suspend [Yes] [Yes] [No] MODEM Use IRQ [3] IRQ [NA] [3] [4] [5] [7] [9] [10] [11] Soft-Off by PWR-BTTN [Instant-Off] [Instant-Off] [Delay 4 Sec] [Instant-Off] [Delay 4 Sec.
KB Power On Password [Enter] Power On Function Password Hot Key Power On Password [Ctrl-F1] [Ctrl-F1] ... [Ctrl-F12] Power On Function Hot Key Resume by Alarm [Disabled] RTC [Disabled] [Enabled] Date (of Month) Alarm [0] [Min=0] [Max=31] Time (hh:mm:ss) Alarm [0 : 0 : 0] 1. 2. 3. 4. 5. 6.
5.5.1 Hardware Monitor Hardware Monitor Voltage Monitor System Temperature1 CPU1 Temperature CPU2 Temperature Front Fan1 Speed CPU Fan1 Speed CPU Fan2 Speed Front Fan2 Speed Rear Fan1 Speed Rear Fan2 Speed Select Menu Item Specific Help 39oC/102oF 45oC/113oF N/A 0 RPM 5152 RPM 0 RPM 0 RPM 0 RPM 0 RPM Press Enter to view. BIOS Voltage Monitor Voltage Monitor CPU VCORE A (V) +12V Voltage +3.3V Voltage +5VCC Voltage VBAT Voltage +5VSB Voltage 1.45V 11.79V 3.26V 4.96V 3.10V 4.
Smart Q-Fan Configuration Smart Q-Fan Configuration Smart Fan Control System Target Temperature CPU1 Target Temperature CPU2 Target Temperature [Disabled] 50 60 60 Select Menu Item Specific Help Smart Fan Control [Disabled] Q-Fan [Disabled] [Enabled] 1. 2.
5.6 Boot Menu Select Menu Boot Device Priority Item Specific Help Hard Disk Boot Priority Removable Device Priority Boot Settings Configuration Security 5.6.1 Boot Device Priority Boot Device Priority 1st Boot Device 2nd Boot Device 3rd Boot Device Select Menu [Removable] [CDROM] [Hard Disk] Item Specific Help Select your Boot Device Priority.
5.6.2 Hard Disk Boot Priority Hard Disk Boot Priority 1. Bootable Add-in Cards Select Menu Item Specific Help Use or arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press to exit this menu. 5.6.3 Removable Device Priority Removable Device Priority 1. Floppy Disks Select Menu Item Specific Help Use or arrow to select a device, then press <+> to move it up, or <-> to move it down the list. Press to exit this menu.
5.6.4 Boot Settings Configuration Boot Settings Configuration Boot Other Device Quick Power On Self Test Halt On Case Open Warning Boot Up Floppy Seek Boot Up NumLock Status Typematic Rate Setting Typematic Rate (Chars/Sec) Typematic Delay (Msec) Full Screen Logo Show Select Menu [Enabled] [Enabled] [All Errors] [Enabled] [Enabled] [On] [Disabled] 6 250 [Enabled] Item Specific Help Select your Boot Device Priority.
Boot Up NumLock Status [On] NumLock [Disabled] [Enabled] Typematic Rate Setting [Disabled] [Enabled] [Enabled] [Disabled] [Typematic Rate(Chars/Sec) ] [Typematic Delay] [Typematic Setting] [Enabled] Typematic Rate(Chars/Sec) [6] [6] [8] [10] [12] [15] [20] [24] [30] Typematic Delay(Msec) [250] [250] [500] [750] [1000] Full Screen Logo Show [Enable] Mylogo2TM [Disabled] [Enabled] Mylogo2 TM Mylogo2TM Logo 5-40 BIOS
5.6.5 Security Security Supervisor Password User Password Password Check Select Menu Clear Clear [Setup] Item Specific Help Supervisor password control full access. Supervisor Password [Clear] User Password [Clear] 1. 2. 3. [Set] 1. PASSWORD DISABLED!!!Press any key to continue... 2.
BIOS Main Menu BIOS BIOS Supervisor password BIOS password User BIOS CMOS RTC 2.
5.7 BIOS Exit Menu Exit BIOS BIOS Select Menu Exit & Save Changes Exit & Discard Changes Load Setup Defaults Discard Changes Item Specific Help This option saves data to CMOS before exiting Setup.
Load Setup Defaults F5 Enter [Yes] [No] BIOS BIOS Discard Changes BIOS Enter [Yes] [No] 5-44 BIOS BIOS BIOS
A.1 600W A.1.1 1.
A.1.2 110 to 127 V 200 to 240 V 10A 5A 50 Hz to 60Hz (A) +3.33V 20 +5V 24 +12V 15 -12V 0.5 +5V 0.5 +5VSB 2.
A.2 600W A.2.1 / 1.
A.2.2 100 to 240 Vac AC 90 Vac AC 264 Vac 47Hz to 63Hz (A) (W) +3.33V 40 580 +5V 50 580 +12V 34 580 -12V 1.0 12 -5V 0.5 2.5 +5VSB 2.
A.3 1. Introduction 1. 2. 3. 4. 1. POST 2. 1. 2.
Non-system disk or disk 1. primary active primary error 2. SCSI SCSI 1. RJ-45 2.
1.
