English User Manual ET1612I Series
English E7574 First Edition V1 July 2012 Copyright © 2012 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER, INC. (“ASUS”).
Contents..................................................................................................... 3 Notices...................................................................................................................................................... 5 Notes for this manual........................................................................................................................11 Safety information..............................................................................
English Using the recovery partition...........................................................................................................34 Recovering the OS to the Factory Default Partition (F9 Recovery)..........................34 Backing up the Factory Default Environment Data to a USB Drive (F9 Backup) 34 Using the USB storage device (USB Restore)............................................................................
English Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • • This device may not cause harmful interference, and This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Canadian Department of Communications Statement English This digital apparatus does not exceed the Class B limits for radio noise emissions from digital apparatus set out in the Radio Interference Regulations of the Canadian Department of Communications. This class B digital apparatus complies with Canadian ICES-003. IC Radiation Exposure Statement for Canada This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment.
English CE Mark Warning This is a Class B product, in a domestic environment, this product may cause radio interference, in which case the user may be required to take adequate measures. CE marking for devices without wireless LAN/Bluetooth The shipped version of this device complies with the requirements of the EEC directives 2004/108/EC “Electromagnetic compatibility” and 2006/95/EC “Low voltage directive”.
France Restricted Wireless Frequency Bands English Some areas of France have a restricted frequency band. The worst case maximum authorized power indoors are: • • 10mW for the entire 2.4 GHz band (2400 MHz–2483.5 MHz) 100mW for frequencies between 2446.5 MHz and 2483.5 MHz Channels 10 through 13 inclusive operate in the band 2446.6 MHz to 2483.5 MHz.
English NO DISASSEMBLY The warranty does not apply to the products that have been disassembled by users Lithium-Ion Battery Warning CAUTION: Danger of explosion if RTC (Real Time Clock) battery is incorrectly replaced. It should be replaced only with the same or equivalent type by the manufacturer. Dispose of used batteries according to the manufacturer’s instructions. No Exposure to Liquids DO NOT expose to or use near liquids, rain, or moisture. This product is not waterproof or oil-proof.
Global Environmental Regulation Compliance and Declaration English ASUS follows the green design concept to design and manufacture our products, and makes sure that each stage of the product life cycle of ASUS product is in line with global environmental regulations. In addition, ASUS disclose the relevant information based on regulation requirements. Please refer to http://csr.asus.com/english/Compliance.
ENERGY STAR complied product English ENERGY STAR is a joint program of the U.S. Environmental Protection Agency and the U.S. Department of Energy helping us all save money and protect the environment through energy efficient products and practices. All ASUS products with the ENERGY STAR logo comply with the ENERGY STAR standard, and the power management feature is enabled by default. The monitor and computer are automatically set to sleep after 15 and 30 minutes of user inactivity.
Safety information English Your ASUS All-in-one PC ET1612I Series is designed and tested to meet the latest standards of safety for information technology equipment. However, to ensure your safety, it is important that you read the following safety instructions. Setting up your system • • • • • • Read and follow all instructions in the documentation before you operate your system. Do not use this product near water or a heated source such as a radiator. Set up the system on a stable surface.
Sound Pressure Warning English Excessive sound pressure from earphones or headphones can cause hearing damage or loss. Adjustment of the volume control as well as the equalizer to settings other than the center position may increase the earphones or headphones output voltage and the sound pressure level. Adapter 1. Adapter information (varies with the purchased model) • Input voltage: 100–240Vac Input frequency: 50–60Hz Rating output current: 40W (19V, 2.
Welcome English Congratulations on your purchase of ASUS All-in-one PC ET1612I Series. The following illustration displays the package contents of your new product. If any of the following items is damaged or missing, contact your retailer. Package contents ASUS All-in-one PC ET1612I Series Keyboard (optional) Mouse (optional) AC adapter Power cord Wall mount screws Warranty card Rubber foot for stand Quic k Gu id e Quick guide 1.
English Getting to know your ASUS All-in-one PC Front view Refer to the following diagram to identify the components on this side of the system. 1 11 2 3 10 4 9 5 8 6 7 1 Webcam The built-in webcam with the microphone allows you to start video chats online. 2 Webcam LED Indicates that the built-in webcam is enabled. 3 LCD display (Touch-enabled) The 15.
English 6 7 8 9 Hard disk drive LED Indicates hard disk drive activity. Wireless LAN LED Indicates that the internal wireless LAN is enabled. (Windows® software settings are necessary to use the wireless LAN.) Brightness controls The brightness controls adjust the screen brightness level. Volume controls The volume controls adjust the sound level. 11 Microphone The built-in microphone with the webcam allows you to start video chats online.
Rear view 9 1 8 2 7 3 6 1 2 5 English Refer to the following diagram to identify the components on this side of the system. 4 Microphone jack The microphone jack is designed to connect a microphone used for video conferencing, voice narrations, or simple audio recordings. Headphone/Audio Out jack The stereo headphone jack (3.5mm) is used to connect the system’s audio out signal to amplified speakers or headphones. Using this jack automatically disables the builtin speakers.
3 English 4 5 6 7 8 USB 2.0 port The Universal Serial Bus (USB) port is compatible with USB devices such as keyboards, mouse devices, cameras, and hard disk drives. Serial port These 9-pin serial ports (COM1/COM2) are for serial devices. Display (Monitor) Output The 15-pin D-sub monitor port supports a standard VGA-compatible device such as a monitor or projector to allow viewing on a larger external display.
Side view English Refer to the following diagram to identify the components on this side of the system. 1 2 1 USB 3.0 port These Universal Serial Bus 3.0 (USB 3.0) ports connect to USB 3.0 devices such as a mouse, printer, scanner, camera, and others. 2 Memory card reader The built-in memory card reader reads MMC/SD cards used in devices like digital cameras, MP3 players, mobile phones, and PDAs.
Using the touch screen English ASUS All-in-one PC brings digital life to your fingertips. With a few touches, you can make ASUS All-in-one PC work at your command. Your touch functions like a mouse device: • • Touch = left-click on the mouse Touch and hold = right-click on the mouse Do not use sharp objects, such as scissors or ballpoint pens, on the touch screen. Dents and scratches will cause malfunction.
Click Change touch input settings. 3. Click the Touch tab on the top and click the box before Show the touch pointer when I’m interacting with items on the screen. Click OK to finish the configuration. English 2. 4. You will see a virtual mouse on the screen when you touch the screen. Cleaning the touch screen The touch screen requires periodic cleaning to achieve the best touch sensitivity. Keep the screen clean from foreign objects or excessive dust accumulation.
Positioning your ASUS All-in-one PC English Placing on the desktop Place your ASUS All-in-one PC on a flat surface such as a table or desk, and �������������������� pull the stand open until it snaps in place. Then, tilt the display panel to an angle of between 10 and 35 degrees from an upright position. 10° 0° 0° 35° Installing the wall mount adapter To mount your ASUS All-in-one PC to the wall, purchase an optional wall mount adapter (160mm x 92mm) and a wall mount kit (pad and rack).
Remove the four plastic caps, from the rear panel holes. English 2. -2 -1 3. Secure the four wall mount screws(included) to the rear panel holes. -2 -1 4. Mount the All-in-one PC onto a firm wall by applying a standard wall mount kit (pad and rack) to the wall mount screws. Follow the instructions described in the installation manual that came with your wall mount kit. • The wall mount kit should comply with VESA 75 standards, which can be purchased separately.
Setting up your ASUS All-in-one PC English Connecting the wired keyboard and mouse Connect the keyboard to the USB port on the rear panel ( another USB port on the rear panel ( 2 ). -2 -1 1 -2 -1 2 24 ASUS All-in-one PC ET1612I Series 1 ).
Powering on the system 1 2 3 ) and then press English Connect the supplied AC adapter to the DC IN jack on the rear panel ( the Power switch on the front panel ( 4 ) to turn on the system. -2 -1 3 2 1 4 Powering off • To power off the LCD display, press the LCD display switch • To put the system into suspend mode, press the Power switch on the front panel. To bring the system back to the OS, press the Power switch again, click the mouse, touch the display, or press any key on the keyboard.
Calibrating the screen English All-in-one PC comes with the following software tool that allows you to adjust touch screen precision. 1. From the Windows® desktop, click Start > Control Panel > Hardware and Sound > Tablet PC Settings and click Calibrate the screen for pen or touch input. 2. From the Display tab, click Calibrate. 3. To provide calibration samples, tap the crosshair each time that it appears on the screen. Right-click anywhere on the screen to return to the last calibration point.
1. Click the wireless network icon with an orange star 2. Select the wireless access point you want to connect to from the list and click Connect to build the connection. English Configuring a wireless connection in the Windows® Notification area. If you cannot find the desired access point, click the Refresh icon on the upper right corner to refresh and search in the list again. Enter the network security key when connecting to a security-enabled network. 3.
Configuring a wired connection English Using a static IP 1. Click the network icon with a yellow warning triangle in the Windows® Notification area and select Open Network and Sharing Center. Ensure that you have connected the LAN cable to the All-in-one PC. 28 2. Click Change adapter settings in the left pane. 3. Right-click Local Area Connection and select Properties.
Click Internet Protocol Version 4(TCP/ IPv4) and click Properties. 5. 6. Select Use the following IP address. Enter your IP address, Subnet mask, and Default gateway. If needed, enter the Preferred DNS server address. After entering all the related values, click OK to finish the configuration. English 4. 7. 8.
Using a dynamic IP (PPPoE) English 1. 2 Repeat steps 1–4 in the previous section. Select Obtain an IP address automatically and click OK. (Continue the following steps if using PPPoE) 30 3. Return to the Network and Sharing Center and then click Set up a new connection or network. 4. Select Connect to the Internet and click Next.
Select Broadband (PPPoE) and click Next. 6. Enter your User name and, Password, and Connection name. Click Connect. 7. Click Close to finish the configuration. English 5.
Click the network icon in the notification area and click the connection you just created. 9. Enter your user name and password. Click Connect to connect to the Internet. English 8.
Configuring the audio output English All-in-one PC supports different types of audio configurations. Set up the system using stereo speakers. Speaker configurations Set up the system with the following speaker configurations: Name 2-channel (stereo) Speaker system Left speaker and right speaker. Audio jack Headphones/2-channel Audio Out Mic In A stereo speaker set is a left-right, two channel speaker system. A multi-channel audio speaker has a left-right front and left-right rear (surround) channel.
Recovering your system English Using the recovery partition The recovery partition includes an image of the operating system, drivers, and utilities installed on your system at the factory. The recovery partition provides a comprehensive recovery solution that quickly restores your system’s software to its original working state, provided that your hard disk drive is in good working order.
Based on the different situations in the previous step, data on the selected USB storage device or on the selected partition will be cleared. Click Backup to start backup. English 5. You will lose all your data on the selected USB storage device or on the selected partition. Ensure to back up your important data beforehand. 6. When backing up the factory default environment is completed successfully, click Reboot to restart the system.
English 36 Manufacturer ASUSTek COMPUTER INC. Address, City No. 150, LI-TE RD., PEITOU, TAIPEI 112, TAIWAN R.O.C Country TAIWAN Authorized Representative in Europe ASUS COMPUTER GmbH Address, City HARKORT STR.
