AI Accelerator Card CRL-G18U-P3DF/CRL-G116U-P3DF Software User Manual
E17563 First Edition December 2020 COPYRIGHT INFORMATION No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Contents Conventions used in this manual.......................................................................................... 4 Typography................................................................................................................................... 4 Where to find more information........................................................................................... 4 ASUS Websites..................................................................................................
Conventions used in this manual To highlight key information in this manual, some text are presented as follows: IMPORTANT! This message contains vital information that must be followed to complete a task. NOTE: This message contains additional information and tips that can help complete tasks. WARNING! This message contains important information that must be followed to keep you safe while performing certain tasks and prevent damage to your Single Board Computer's data and components.
1. Software requirements • Workstation running Ubuntu/Debian/Windows 10 (stable release preferred e.g. Ubuntu 18.04.4 or Debian Buster) • Assembled AI Accelerator Card, installed into the workstation’s PCIe slot. NOTE: For more information on installing the AI Accelerator card to the system’s PCIe slot, please refer to 2.2 Card Installation in the Hardware User Manual. • 2. Working network connection.
2.3 1. Begin multiple Edge TPU tests Clone the "edgetpu" source code of Google from github. $ git clone https://github.com/google-coral/edgetpu 2. Open the “edgetpu” folder, then enter the following commands to test multiple Edge TPUs: $ cd edgetpu/benchmarks $ python3 multiple_tpus_performance_analysis.py 3. You can check the test result through the Pass or fail log. multiple_tpus_performance_analysis.cc:108] Model name: mobilenet_v1_1.0_224_quant_edgetpu.tflite multiple_tpus_performance_analysis.
2.4 Monitor Edge TPU status 2.4.1 Related commands for multiple Edge TPUs You can find a brief list of related commands for multiple Edge TPUs monitoring in the table below: Task Command Amount of Edge TPUs ls -l /sys/class/apex/ Link speed cat /sys/class/apex/apex_*/device/current_link_speed Link width cat /sys/class/apex/apex_*/device/current_link_width NOTE: Please refer to https://coral.ai/docs/pcie-parameters for more information. 2.4.
3. Windows OS 3.1 Installing the Edge TPU drivers Please visit https://coral.ai/docs/m2/get-started/#2b-on-windows and "2a: On Windows" for more information on installing the Edge TPU drivers on Windows. 3.2 Monitor Edge TPU status 3.2.1 Related commands for multiple Edge TPUs You can get the Edge TPU temperature with the following PowerShell command: Get-Counter -Counter '\Coral PCIE Accelerator(*)\Temperature' NOTE: Please refer to https://coral.
ASUS contact information ASUSTeK COMPUTER INC. Address Telephone Fax Web site 1F., No. 15, Lide Rd., Beitou Dist., Taipei City 112, Taiwan +886-2-2894-3447 +886-2-2890-7798 www.asus.com Technical Support Telephone +86-21-38429911 Fax +86-21-5866-8722, ext. 9101# Online support https://www.asus.com/support/Product/ContactUs/Services/ questionform/?lang=en ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Web site Technical Support Support fax Telephone Online support 48720 Kato Rd.
Manufacturer Authorised representative in Europe 10 AI accelerator card ASUSTeK Computer Inc. Tel: +886-2-2894-3447 Address: 1F., No. 15, Lide Rd., Beitou Dist.