User Manual
E8829 First Edition February 2014 Model: ASUS_T00G Copyright © 2014 ASUSTeK COMPUTER INC. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK COMPUTER INC. (“ASUS”).
Thank you for purchasing this ASUS product! Before you start, ensure that you have read all the safety information and operating instructions in this User Manual to prevent injury or damage to your device. NOTE: For the latest updates and more detailed information, please visit www. asus.com.
Side features Audio jack Volume key Power Key Groove Micro USB port NOTE: Pry open the rear cover from the groove.
Rear features Rear camera Flash Rear cover Speaker NOTES: • Remove the rear cover to display the dual micro SIM and microSD card slots. • The micro SIM card slots support WCDMA, DC-HSPA, and GSM/EDGE network bands. The microSD card slot supports microSD and microSDHC card formats.
Charging your ZenFone 6 After installing your micro SIM card, we strongly recommend that you charge your device fully before powering it ON. To charge your ZenFone 6: 1. 2. 3. Connect the USB connector into the power adapter’s USB port. Connect the other end of the micro USB cable to your ZenFone 6. Plug the power adapter into a wall socket. IMPORTANT! • When using your ZenFone 6 while it is plugged to a power outlet, the grounded power outlet must be near to the unit and easily accessible.
NOTES: • Use only the power adapter that came with your device.Using a different power adapter may damage your device. • Using the bundled power adapter and ZenFone 6 signal cable to connect your ZenFone 6 to a power outlet is the best way to charge your ZenFone 6. The input voltage range between the wall outlet and this adapter is AC 100V - 240V. The output voltage of the micro USB cable is DC 5.2V, 1.35A.
Turning your ZenFone 6 on or off Press the power key at the side of your ZenFone 6 to power the device on or to power it off. Power key IMPORTANT: The first time you power on your ZenFone 6, you will see the Welcome screen. Touch the menu to select your preferred language then touch Next Step. Follow the onscreen instructions to set up your ZenFone 6.
Installing a micro SIM card To install a micro SIM card: 1. Locate the groove on the bottom-left corner of your ZenFone 6. 2. Pry the cover loose and then pull the rear cover off. 3. Insert the micro SIM card into one of the slots.
4. Replace the rear cover. 5. Press down the rear cover on all sides to secure it in place. IMPORTANT: • • Both micro SIM card slots support 3G WCDMA network band. But only one micro SIM card can connect to 3G WCDMA service at a time. Use only a micro SIM card on your ZenFone 6. A trimmed SIM card may not properly fit into and may not be detected by your ZenFone 6. NOTE: All specifications are subject to change without notice and may vary by country and region.
Installing a microSD card To install a microSD card: 1. Locate the groove on the bottom-left corner of your ZenFone 6. 2. Pry the cover loose and then pull the rear cover off. 2. Insert the microSD card into the microSD card slot.
4. Replace the rear cover. 5. Press down the rear cover on all sides to secure it in place.
CE RF Exposure Compliance This device meets the EU requirements (1999/519/EC) on the limitation of exposure of the general public to electromagnetic fields by way of health protection. For body-worn operation, this device has been tested and meets the ICNIRP guidelines and the European Standard EN 62209-2, for use with dedicated accessories. SAR is measured with this device at a separation of 1.
Specific Absorption Rate (SAR) Band Position GSM900 Head 0.367 Body (1.5cm Gap) 0.397 Head 0.306 Body (1.5cm Gap) 0.325 Head 0.187 Body (1.5cm Gap) 0.248 WCDMA VIII Head 0.190 Body (1.5cm Gap) 0.211 2.4G WLAN Head 0.303 Body (1.5cm Gap) 0.061 MAX SAR Head 0.367 Body (1.5cm Gap) 0.
Prevention of Hearing Loss To prevent possible hearing damage, do not listen at high volume levels for long periods. À pleine puissance, l’écoute prolongée du baladeur peut endommager l’oreille de l’utilisateur. For France, headphones/earphones for this device are compliant with the sound pressure level requirement laid down in the applicable EN 50332-1:2000 and/or EN50332-2:2003 standard required by French Article L.5232-1.
Safety information ZenFone 6 care • • • • Do not leave your ZenFone 6 exposed to strong sunlight or excessive heat for a prolonged period. This may damage it. Do not handle your ZenFone 6 device with wet hands or expose it to moisture or liquids of any kind. Continuous changes from a cold to a warm environment may lead to condensation inside your ZenFone 6, resulting in corrosion and possible damage. When traveling, avoid packing the device inside a suitcase.
The battery Your ZenFone 6 is equipped with a high performance non-detachable Li-Ion battery. Observe the maintenance guidelines for a longer battery life. • • • • • • • • • Do not remove the non-detachable Li-on battery as this will void the warranty. Avoid charging in extremely high or low temperature. The battery performs optimally in an ambient temperature of +5 °C to +35 °C. Do not remove and replace the battery with a non-approved battery.
NOTES: • • • Risk of explosion if battery is replaced by an incorrect type. Dispose of used battery according to the instructions. Ensure to fully charge the battery before using your ZenFone 6 for extended periods. Remember that the power adapter charges the battery as long as it is plugged into a power source. Be aware that it takes much longer to charge the battery when your ZenFone 6 is in use. IMPORTANT! Do not leave your ZenFone 6 connected to the power source once it is fully charged.
• • • • • If cleaning is necessary, turn your ZenFone 6 off and wipe carefully with a soft, slightly damp (not wet) cloth. Use a cotton swab to clean the camera lens. Allow your ZenFone 6 to dry completely before switching it on. Never use solvents for cleaning. If you are not going to use your ZenFone 6 for some time, fully charge the battery and store your ZenFone 6 in a dry place away from direct sunlight. Your ZenFone 6 should be switched off during storage. Recharge every 6 to 12 months.
In the interest of safety, we would recommend the use of a cradle while using any form of handsfree accessory. While driving, we recommend that you use voicemail wherever possible, and that you listen to your messages when you are not in the car. If you must make a handsfree call when driving, keep it brief. Do not place objects, including both installed or portable wireless equipment, in the area over the airbag or in the airbag deployment area. An airbag inflates with great force.
• • Use the ear opposite the pacemaker to minimize the potential for interference. If you have any reason to suspect that interference is taking place, switch off your ZenFone 6 immediately. Hearing aids Some digital phones may interfere with some hearing aids. In the event of such interference, call ASUS Customer Service to discuss alternatives.
Magnetic media Magnetic fields generated by mobile devices may damage data on magnetic storage media, such as credit cards, computer discs or tapes. Do not place your ZenFone 6 next to such media. You should never expose your ZenFone 6 to strong magnetic fields as this may cause temporary malfunction. Other Safety Guidelines Aircraft Regulations prohibit using your mobile device while onboard an aircraft. Switch off your ZenFone 6 before boarding an aircraft or turn off the wireless connection.
Areas with a potentially explosive environment are often, but not always, clearly marked. They include fuelling areas such as gas stations, below decks on boats, fuel or chemical transfer or storage facilities, vehicles using liquified petroleum gas (such as propane or butane), areas where the air contains chemicals or articles, such as grain, dust, or metal powders, and any other area where you would normally be advised to turn off your vehicle’s engine.
• • Do not disassemble the ZenFone 6 or its accessories. If service or repair is required, return the unit to an authorized service center. If the unit is disassembled, a risk of electric shock or fire may result. Do not short-circuit the battery terminals with metal items.
ASUS Address: 15 Li-Te Road, Peitou, Taipei, Taiwan Tel: 886228943447 Fax: 886228907698 Declaration We declare that the IMEI codes for this product, ASUS ZenFone 6, are unique to each unit and only assigned to this model. The IMEI of each unit is factory set and cannot be altered by the user and that it complies with the relevant IMEI integrity related requirements expressed in the GSM standards. Should you have any questions or comments regarding this matter, please contact us.
EC Declaration of Conformity We, the undersigned, Manufacturer: ASUSTeK COMPUTER INC. Address, City: 4F, No. 150, LI-TE Rd., PEITOU, TAIPEI 112, TAIWAN Country: TAIWAN Authorized representative in Europe: ASUS COMPUTER GmbH Address, City: HARKORT STR.
CE Declaratie de Conformitate Noi, subsemnaii, ASUSTeK COMPUTER INC.
15060-31000000