VA24ECE Series LCD Monitor User Guide
Table of contents TCO certified................................................................................................ iii Notices.......................................................................................................... iv Care & Cleaning......................................................................................... viii Takeback Services..................................................................................... 1-1 1.1 Welcome!.................................
TCO certified A third-party certification according to ISO 14024 Toward sustainable IT products Say hello to a more sustainable product IT products are associated with a wide range of sustainability risks throughout their life cycle. Human rights violations are common in the factories. Harmful substances are used both in products and their manufacture. Products can often have a short lifespan because of poor ergonomics, low quality and when they are not able to be repaired or upgraded.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference, and • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Safety information • Before setting up the monitor, carefully read all the documentation that came with the package. • To prevent fire or shock hazard, never expose the monitor to rain or moisture. • Never try to open the monitor cabinet. The dangerous high voltages inside the monitor may result in serious physical injury. • If the power supply is broken, do not try to fix it by yourself. Contact a qualified service technician or your retailer.
Declaration of Conformity This device complies with the requirements set out in the Council Directive on the Approximation of the Laws of the Member States relating to Electromagnetic Compatibility (2014/30/EU), Low-voltage Directive (2014/35/EU), ErP Directive (2009/125/EC) and RoHS directive (2011/65/EU).
WARNING Usage of other than specified head- or earphones can result in hearing loss due to excessive sound pressures. Please confirm the distribution system in building installation shall provide the circuit breaker rated 120/240V, 20A (maximum). If provided with a 3-pin attachment plug on the power cord, plug the cord into a grounded (earthed) 3-pin outlet. Do not disable the power cord grounding pin, for example, by attaching a 2-pin adapter. The grounding pin is an important safety feature.
Care & Cleaning • Before you lift or reposition your monitor, it is better to disconnect the cables and power cord. Follow the correct lifting techniques when positioning the monitor. When lifting or carrying the monitor, grasp the edges of the monitor. Do not lift the display by the stand or the cord. • Cleaning. Turn your monitor off and unplug the power cord. Clean the monitor surface with a lint-free, non-abrasive cloth. Stubborn stains may be removed with a cloth dampened with mild cleaner.
Where to find more information Refer to the following sources for additional information and for product and software updates. 1. ASUS websites The ASUS websites worldwide provide updated information on ASUS hardware and software products. Refer to http://www.asus.com 2. Optional documentation Your product package may include optional documentation that may have been added by your dealer. These documents are not part of the standard package.
1.1 Welcome! Thank you for purchasing the ASUS® LCD monitor! The latest widescreen LCD monitor from ASUS provides a crisper, broader, and brighter display, plus a host of features that enhance your viewing experience. With these features, you can enjoy the convenience and delightful visual experience that the monitor brings you! 1.
1.3 Assembling the monitor To assemble the monitor: 1. Place the monitor stand base on a stable table top, Slide the monitor stand body in the correct direction down onto the stand base. 2. Align the stand assembly bracket to the monitor groove.Insert the bracket towards monitor until it locks in place. 3. Adjust the monitor to the angle that is most comfortable for you.
1.4 Connect cables 1.4.1 Rear of the LCD monitor 5 HDMI 1 1-4 1. AC-IN Port 2. HDMI Port 3. USB Type-C Port 4. Audio out 5.
Installaion 1. 2. 3. 4. 5. Turn off your computer and unplug your computer's power cord. Connect the signal cable to the HDMI (optional) input socket of the monitor, and the HDMI (optional) (optional) output socket of the graphics card on the computer. Then tighten the thumbscrews on the signal cable connector. USB Type C Cable (Optional, USB Type C input models only) Connect one end of the USB type C cable (optional) to your computer and connect the other end to your electric devices.
1-6 • POWER CORD specifications refer to page v. • For the installation of replaceable parts, please refer to the above installation instructions. • Users may go to the local service network to replace /purchase the qualified replaceable parts. • For local service centers and service contacts, please refer to https://www.asus.
1.4.
1.5 Monitor introduction 1.5.1 Using the Controls button Use the control button on the back of the monitor to adjust the image settings. 1 2 3 4 5 1. 2. 3. 4. 5. Menu Button / Close: • Press this Button enter the OSD menu. • Exit the OSD menu. • Return to previous menu. • Key Locked Hot key(*Note1) Close / Return Button: • Exit the OSD menu. • Enter/select the icon (function) highlighted while the OSD is activated.
2.1 Detaching the arm/stand (for VESA wall mount) The detachable stand of this monitor is specially designed for VESA wall mount. To detach the arm/stand 1. Disconnect power and signal cables. Carefully put the front of the monitor face down on a clean table. 2. Remove the base/stand from the monitor. • We recommend that you cover the table surface with soft cloth to prevent damage to the monitor. • The VESA wall mount kit ( 100 x 100 mm) is purchased separately.
2.2 Adjusting the monitor • For optimal viewing, we recommend that you look at the full face of the monitor, then adjust the monitor to the angle that is most comfortable for you. • Hold the stand to prevent the monitor from falling when you change its angle. • You can adjust the monitor’s angle from +23˚ to -5˚. -5 ~ 23 It is normal that the monitor slightly shakes while you adjust the viewing angle.
3.1 OSD (On-Screen Display) menu 3.1.1 How to reconfigure Splendid ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode 1. Press the MENU button to activate the OSD menu. 2. Press the and buttons to toggle between options in the Menu. As you move from one icon to another, the option name is highlighted. 3. To select the highlighted item on the menu press the Center key. 4.
3.1.2 1. OSD Function Introduction Splendid This function contains eight sub-functions that you can select for your preference. Each mode has the Reset selection, allowing you to maintain your setting or return to the preset mode. Splendid ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Standard Mode sRGB Mode Scenery Mode Theater Mode Game Mode Night View Mode Reading Mode Darkroom Mode 3-2 • Standard Mode: This is the best choice for document editing with SPLENDID™ Video Intelligence Technology.
2. EyeCare EyeCare ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Blue Light Filter Rest Reminder Color Augmentation • • Blue Light Filter: In this function, you can adjust the blue light filter from 0 to max. 0: no changes；Max: The higher the level, the less blue light is scattered. When blue light filter is activated, the default settings of Standard Mode will be automatically imported. Besides maximum level, the brightness is user-configurable. Maximum is the optimized setting.
3. Color Select the image color you like from this function. Color ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Brightness Contrast Saturation Color Temp. Skin Tone • Brightness: The adjusting range is from 0 to 100. • Contrast: The adjusting range is from 0 to 100. • Saturation: The adjusting range is from 0 to 100. • Color Temp.: Contains three preset color modes (Cool, Normal, Warm) and User Mode. • Skin Tone: Contains three color modes including Reddish, Natural, and Yellowish.
4. Image You can adjust the image Sharpness, Trace Free, Aspect Control, VividPixel, ASCR and FreeSync from this main function. Image ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Sharpness Trace Free Aspect Control VividPixel ASCR FreeSync • Sharpness: Adjusts the picture sharpness. The adjusting range is from 0 to 100. • Trace Free: Speeds up the response time by Over Drive technology. The adjusting range is from lower 0 to faster 100. • Aspect Control: Adjusts the aspect ratio to “Full”, “4:3”.
5. Input Select Select the input source from HDMI, USB Type-C input signal. ASUS VA24ECE Standard Mode HDMI 1080p 60Hz Input Select HDMI USB Type-C 6. System Setup Adjusts the system configuration. ASUS VA24ECE Standard Mode HDMI 1080p 60Hz System Setup Splendid Demo Mode Volume GamePlus QuickFit ECO Mode USB Charging OSD Setup More ASUS VA24ECE Standard Mode HDMI 1080p 60Hz System Setup Back Language Key Lock Information Power Indicator Power Key Lock All Reset 3-6 ...
• GamePlus: The GamePlus Function provides a toolkit and creates a better gaming environment for users when playing different types of games. Particularly, Aimpoint function is specially designed for new gamers or beginners interested in First Person Shooter (FPS) games. To active GamePlus: • Select ON to enter the GamePlus main menu. • Press and to select between Crosshair, Timer, FPS Counter, Display Alignment, Snellen Chart, Amslter Grid and Astigmatism function.
Alignment Grid 1 2. Alignment Grid 2 Paper size: Provides users to view their documents in real size on the screen. B5 Letter B5 Letter EXIT 3. Photo size: Provides photographers and other users to accurately view and edit their photos in real size on the screen. 8x10 3-8 EXIT 5x7 4x6 3x5 2x2 • ECO Mode: Activate the ecology mode for power saving. • USB Charging: Turn On/Off USB charging function during the standby mode.
7. • Language: Select OSD language. The selections are: English, French, German, Spanish, Italian, Dutch, , Russian, Poland, Czech, Croacia, Hungary, Romania, Portugal, Turkey, Simplified Chinese, Traditional Chinese, Japanese, Korean, Persian, Thai, Indonesian. • Key Lock: Disable all key functions. Pressing the second button on the right for more than five seconds to disable key lock function. • Information:Displays the monitor information. • Power Indicator: Turn the power LED indicator on/off.
3.2 Specifications Model VA24ECE Panel Size 23.8”W Max. Resolution 1920x1080 Brightness (Typ.) 250cd/m2 Intrinsic Contrast Ratio (Typ.) Viewing Angle (CR>10) 178°(V) /178°(H) Display Colors 16.
3.3 Troubleshooting (FAQ) Problem Power LED is not ON Possible Solution • Press the button to check if the monitor is in the ON mode. • Check if the power cord is properly connected to the monitor and the power outlet. • Check Power Indicator function in main menu OSD. Select “ON” to turn on power LED. The power LED lights amber and • Check if the monitor and the computer are in the there is no screen image ON mode. • Make sure the signal cable is properly connected the monitor and the computer.
3.
Detail timing H Pixels V Pixels Frame Rate HDMI Type-c 1920 1080 60 V V 1920 1080 75 V V 3-13
