User Guide 4G-N12 Wireless-N300 LTE Modem Router
E9553 First Edition November 2014 Copyright © 2014 ASUSTeK Computer Inc. All Rights Reserved. No part of this manual, including the products and software described in it, may be reproduced, transmitted, transcribed, stored in a retrieval system, or translated into any language in any form or by any means, except documentation kept by the purchaser for backup purposes, without the express written permission of ASUSTeK Computer Inc. (“ASUS”).
Contents 1 Getting to know your wireless router 2 Getting started 3 Configuring the General settings 1.1 1.2 1.3 1.4 1.5 1.6 2.1 2.2 3.1 3.2 Welcome!.........................................................................................5 Package contents..........................................................................5 Your wireless router......................................................................6 Positioning your router..........................................................
Contents 4.3.2 4.3.3 4.3.4 4.3.5 4.3.6 4.3.7 4.4 Firewall........................................................................................... 40 4.4.1 4.4.2 4.4.3 4.4.4 4.4.5 4.4.6 4.5 Mobile Connection Status..................................................32 Mobile Connection Scan.....................................................34 UPnP ..........................................................................................35 Virtual Server / Port Forwarding...............................
1 Getting to know your wireless router 1.1 Welcome! Thank you for buying an ASUS 4G-N12 Wireless LTE Router! ASUS 4G-N12 Wireless LTE Router features a 4G network module, letting you insert a SIM/USIM card to access and share your 4G LTE or 3G network connection via a secure wireless network or any of the four Ethernet ports. It offers a download speed of 100 Mbps and upload speed of 50 Mbps for fast Internet access, seamless media streaming, or easy data transfer. 1.
1.3 Your wireless router WA N / L A N LTE signal strength LED 1~4 1 lit LED: Very weak signal; 2 lit LEDs: Weak signal; 3 lit LEDs: Normal signal; 4 lit LEDs: Strong signal. Power LED Off: No power. On: Device is ready. Internet LED O ff: No LTE connection. Flashing: Establishing a LTE/Ethernet WAN connection. O n: Has a proper LTE/Ethernet WAN connection. Data LED (LTE/Ethernet WAN Traffic) Off: No data activity. On: Data connection is ready. Wi-Fi LED Off: No 2.4GHz signal.
USIM Card LED Off: No USIM card is installed. On: A USIM card is installed properly. USIM card slot Install a USIM card into this slot to establish a WAN LTE connection. Power button Press this button to power on or off the stystem. On Off Power (DC-IN) port Insert the bundled AC adapter into this port and connect your router to a power source. Reset button Press this button for 5 seconds or longer to reset or restore the system to its factory default settings.
1.4 Positioning your router For the best wireless signal transmission between the wireless router and the devices connected to it, ensure that you: • Place the Wireless LTE Router near a window to receive the best LTE signal quality for maximum upstream performance with an LTE base station. • Keep the device away from metal obstructions and away from direct sunlight. • Do not place the Wireless LTE Router in a dusty or wet environment. • Keep the device away from 802.11g or 20MHz-only Wi-Fi devices, 2.
1.5 Setup requirements To set up your wireless network, you need to meet the following requirements: • A mini SIM/USIM card with WCDMA and LTE subscription Mini SIM card Micro SIM card Nano SIM card NOTE: A standard SIM/USIM card is a standard mini SIM card. IMPORTANT! Ensure that your SIM/USIM card is subscribed to WCDMA and LTE services. Contact your mobile service provider about these services. CAUTION! Use only a standard SIM/USIM card on your router.
NOTES: • If your computer does not have built-in wireless capabilities, you may install an IEEE 802.11 b/g/n WLAN adapter to your computer to connect to the network. • Do not plug a phone jack into an RJ-45 port. This may damage the Wireless LTE Router. • The Ethernet RJ-45 cables that will be used to connect the network devices should not exceed 100 meters. 1.6 Router Setup WARNING! 10 • Avoid installing your Wireless LTE Router during an electrical storm.
4G-N12 a Wall Power Outlet Power d LAN b f Modem WAN Computer c a. Insert the SIM/USIM card into the USIM card slot. b. Insert the AC adapter of your router to the DC-IN port and plug it to a power outlet. c. Using a network cable, connect your modem to the WAN/LAN port of your wireless router. d. Insert the AC adapter of your modem to the DC-IN port and plug it to a power outlet. e. Turn on your router. f. Using the bundled network cable, connect your computer to the LAN port of your router. g.
2 Getting started 2.1 Logging into the Web GUI Your ASUS Wireless Router comes with an intuitive web graphical user interface (GUI) that allows you to easily configure its various features through a web browser such as Internet Explorer, Firefox, Safari, or Google Chrome. NOTE: The features may vary with different firmware versions. To log into the web GUI: 1. On your web browser, manually key in the wireless router’s default IP address: 192.168.1.1 or enter http://router.asus.com. 2.
2.2 Quick Internet Setup (QIS) with Autodetection The Quick Internet Setup (QIS) function guides you in quickly setting up your Internet connection. NOTE: When setting the Internet connection for the first time, press the Reset button on your wireless router to reset it to its factory default settings. To use QIS with auto-detection: 1. Log into the Web GUI. The QIS page launches automatically. 2. On the welcome page, click Go to continue.
3. Change the password for the wireless router. When done, click Next. NOTE: We recommend that you assign a unique administrator password to protect your network from malicious attacks. 4. The wireless router automatically detects and applies the APN settings. When done, click WLAN Setting to configure the wireless LAN settings. 5. Assign a unique network name (SSID) and a network security key. When done, click Apply.
6. Your Internet and wireless settings are displayed. Click Next to continue. 7. If the wizard failed to apply the APN settings or the PIN code of the SIM card is required, you need to manually complete the mobile broadband connection. Key in the necessary APN settings and the PIN code of your SIM card. When done, click Connect.
3 Configuring the General settings 3.1 Using the Network Map Network Map allows you to check the internet connection status, configure your network’s security settings, and manage your network clients. 3.2 SMS Short Message Service (SMS) is a text messaging service that allows you to send or receive messages from or on your wireless router.
3.2.1 New SMS This function allows you to send short messages from your wireless router. To send a new SMS message: 1. Enter the recipient’s phone number. 2. Compose your message. 3. Click Transmit to send the message. To save a SMS draft: 1. Enter the recipient’s phone number. 2. Compose your message. 3. Click Save to Draft to save the message draft.
3.2.2 Inbox Inbox allows you to view the received short messages saved in your device. Click Read to read a message, or click Delete to delete a message. 3.2.3 Drafts All the message drafts are saved in the Wireless LTE Router and displayed here. Click Transmit to send a message, or click Delete to delete a message. 3.2.4 Phone Book Phone Book allows you to save your frequent contacts’ phone numbers. To add a phone number, enter the name and phone number, and click 18 .
4 Configuring the Advanced Settings 4.1 Wireless The Wireless LTE Router operates as a wireless access point, allowing wireless device to connect to the Internet. The GUI allows you to configure the radio channel, Service Set Identifier (SSID), security and WPS settings. 4.1.1 General The General tab allows you to configure the basic wireless settings. To configure the basic wireless settings: 1. From the navigation panel, go to Advanced Settings > Wireless > General tab. 2.
3. Assign a unique name containing up to 32 characters for your SSID (Service Set Identifier) or network name to identify your wireless network. Wi-Fi devices can identify and connect to the wireless network via your assigned SSID. The SSIDs on the information banner are updated once new SSIDs are saved to the settings. 4. In the Hide SSID field, select Yes to prevent wireless devices from detecting your SSID.
7. Select the operating channel for your wireless router. Select Auto to allow the wireless router to automatically select the channel that has the minimum interference. 8. Extension Channel: The extension channel that you can assign is based on the following: • When Bandwidth is set to 20MHz, the extension channel is disabled. • When Wireless Channel (main channel) is set to 1, select channel 5 as the extension channel.
4.1.2 RADIUS Setting RADIUS (Remote Authentication Dial In User Service) Setting provides an extra layer of security when you choose WPAEnterprise, WPA2-Enterprise, or RADIUS with 802.1x as your Authentication Mode. To configure the wireless RADIUS settings: 1. From the navigation panel, go to Advanced Settings > Wireless > RADIUS Setting tab. 2. Server IP Address: Enter the RADIUS server’s IP Address in this field. 3. Server Port: Enter the RADIUS server’s port number in this field. 4.
4.1.3 Wireless MAC Filter Wireless MAC filter provides control over packets transmitted to a specified MAC (Media Access Control) address on your wireless network. To set up the Wireless MAC filter: 1. From the navigation panel, go to Advanced Settings > Wireless > Wireless MAC Filter tab. 2. In the Enable MAC Filter field, select Yes to enable Wireless MAC filter. 3. In the MAC Filter Mode dropdown list, select either Accept or Reject.
4.1.4 WPS (Wi-Fi Protected Setup) WPS (Wi-Fi Protected Setup) allows you easy create a secure wireless network via the PIN code or Push Button Control (PBC) feature.
To create a secure network using WPS: 1. From the navigation panel, go to Advanced Settings > Wireless > WPS tab. 2. In the Enable WPS field, select Enabled, then click Apply. 3. Set up WPS via the PIN code or PBC (Push Button Control) method. Refer to the succeeding steps for more details. To set up WPS via the PIN code method: 1. Power on your client device that supports WPS PIN (Personal Information Number) code method. 2. Enter the PIN code of the client device and click Enroll.
4.2 LAN 4.2.1 LAN Settings The LAN settings screen allows you to configure the local network IP address of the LTE Router and modify the DHCP server settings. To modify the LAN settings: 1. From the navigation panel, go to Advanced Settings > LAN > LAN tab. 2. Enter the IP address and subnet mask of the wireless router. 3. In the Enable the DHCP Server field, select Yes or No. By default, the DHCP Server function is enabled. 4. In the IP Pool Starting Address field, key in the starting IP address. 5.
NOTES: • We recommend that you use an IP address format of 192.168.1.xxx (where xxx can be any number between 2 and 254) when specifying an IP address range. • An IP Pool Starting Addressn should not be greater than the IP Pool Ending Address. 6. In the Lease Time dropdown list, select the schedule when an IP address will expire. Once it reaches this specified schedule, the DHCP server will then assign a new IP address.
4.2.2 DHCP Client List The DHCP Client List screen displays the DHCP client information. Click Refresh to update the connected client list. 4.3 WAN The LTE Router is implemented with an LTE (Long Term Evolution) module. LTE network offers wide channel bandwidth from 5MHz to 20 MHz, and fast mobile data rates of up to 50 Mbps uplink and 100 Mbps downlink. The supported bands show as below: • LTE Band: FDD B3/7/20 • LTE Cat. 3: DL: 100Mbps, UL: 50Mbps • UMTS: B1/8 • HSPA +: DL: 42Mbps, UL: 5.76Mbps 4.3.
• WAN Type - LTE/UMTS a. Set up the following: • PIN Code: Enter the 3G/4G provider’s PIN code. • Connection Type: This field allows you to define your connection policies. We recommend you select AutoTriggered by traffic if you are not using all-you-can-eat data service. • Location: Select your 3G/4G service provider’s location from the dropdown list. • APN services (optional): Enter the APN (Access Point Name) service information here. Contact your 3G/4G service provider for the detailed information.
• Username / Password: Enter the username and password provided by the 3G/4G network carrier. • Dial on demand (with idle timeout timer): Enter the time (in minutes) when the router goes into the sleep mode when there is no activity in the network. • MTU: Sets the MTU (Maximum Transmission Unit). b. Click Apply to connect to the 3G/4G network. The connection status will be displayed on Mobile Connection Status screen. NOTE: The PIN code may vary with different providers.
a. Configure the following settings below. When done, click Apply. • WAN Connection Type: Choose your Internet Service Provider type. The choices are Automatic IP, PPPoE or fixed IP. Consult your ISP if the router is unable to obtain a valid IP address or if you are unsure the WAN connection type. • Enable WAN: Select Yes to allow the router Internet access. Select No to disable Internet access.
• Clone or change the MAC address of the ASUS wireless router to match the MAC address of the previous networking device recognized by the ISP. 4.3.2 Mobile Connection Status The Mobile Connection Status screen displays the detailed Mobile Broadband connection status.
Scroll down to display other items: To configure the Data Usage settings: 1. From the navigation panel, go to Advanced Settings > WAN > Mobile Connection Status tab. 2. Data traffic limit: Select Enable to allow setting a limit for your Internet traffic usage. 3. Data usage limit: Set a monthly upper limit for the Internet usage. When your data usage reaches the limit, the Internet access will be blocked 4. Click Apply.
4.3.3 Mobile Connection Scan To select your preferred mobile broadband connection: 1. On the Preferred network type field, select a UMTS frequency band. 2. Click Scan to show all the available mobile networks. 3. Select a mobile network and click Apply to connect to it. NOTES: 34 • The LTE Router can detect your ISP based on the IMSI information of your SIM card. If the mobile network from your ISP is not found, connect to a roaming network of other ISPs.
4.3.4 UPnP UPnP (Universal Plug and Play) allows several devices (such as routers, televisions, stereo systems, game consoles, and cellular phones), to be controlled via an IP-based network with or without a central control through a gateway. UPnP connects PCs of all form factors, providing a seamless network for remote configuration and data transfer. Using UPnP, a new network device is discovered automatically.
4.3.5 Virtual Server / Port Forwarding Virtual Server is a method to direct network traffic from the Internet to a specific port or a specific range of ports to a device or number of devices on your local network. If you configure the LTE Router as a virtual server, remote users accessing services such as web or FTP at your local site via public IP addresses can be automatically redirected to local servers configured with private IP addresses.
4.3.6 DMZ Virtual DMZ exposes one client to the Internet, allowing this client to receive all inbound packets directed to your Local Area Network. Inbound traffic from the Internet is usually discarded and routed to a specific client only if port forwarding or a port trigger has been configured on the network. In a DMZ configuration, one network client receives all inbound packets. Setting up DMZ on a network is useful when you need incoming ports open or you want to host a domain, web, or e-mail server.
To set up DMZ: 1. From the navigation panel, go to Advanced Settings > WAN > DMZ tab. 2. Configure the setting below. When done, click Apply. • Enable DMZ: Key in the last digit of the client’s LAN IP address that will provide the DMZ service and be exposed on the Internet. Ensure that the server client has a static IP address. Tick Enable. To remove DMZ: 1. Untick Enable, and click Apply.
4.3.7 DDNS Setting up DDNS (Dynamic Domain Name System) allows you to access the router outside your network through the provided DDNS service. The DDNS service, which maps a domain name to a static or dynamic IP address, is powered by DynDNS.org. With a DDNS connection, you can host a website, an email server, an FTP site, and other Internet apps in your local area network even when using dynamic IP addresses for the domain names. To set up DDNS: 1.
4.4 Firewall 4.4.1 General The wireless router can serve as a hardware firewall for your network. Set up the firewall to protect your network from malicious attacks such as Denial of Service (DoS) attacks. DoS attacks disable a device or network to deny users access to network resources. To set up basic Firewall settings: 1. From the navigation panel, go to Advanced Settings > Firewall > General tab. 2. On the Enable Firewall field, select Enable. 3.
4.4.2 MAC Filter When MAC Filter is enabled, only those MAC addresses in the list are allowed or denied access to your network. To set up a MAC filter: 1. From the navigation panel, go to Advanced Settings > Firewall > MAC Filter tab. 2. On the Enable MAC Filter field, select Enable. 3. Enter an MAC address and click the button. 4. Click Apply.
4.4.3 Intrusion Detection Intrusion Detection blocks and prevents malicious attacks or intrusions from harming your network and the devices connected to it. Your wireless router prevents Dos attachs such as IP Spoofing, Ping of Death, IP with Zero Length, Smurf Attack, UDP port loopback, Snork Attack, TCP null scan, and TCP SYN floodng.
4.4.4 Access Control Access Control allows you to specify the clients or services that are allowed or blocked to the WAN port service. The access control rules are executed with the specified schedules. To set up a network service filter: 1. From the navigation panel, go to Advanced Settings > Firewall > Access Control tab. 2. On the Enable Filtering Function field, select Enable. 3. Click the button to launch the Add New Rule screen.
4. Enter a description of the clients. 5. Enter the clients’ IP range to block the specified clients. 6. Define a scheduling rule. You can select Always Blocking or specify the day and time when the filters will be active. 7. To specify a network service to filter, select a network service and check Blocking on Client PC Service to block the predefined network service. 8.
4.4.5 URL Filter You can specify keywords or web addresses to prevent access to specific URLs. NOTE: The URL Filter is based on a DNS query. If a network client has already accessed a website such as http://www.abcxxx.com, then the website will not be blocked (a DNS cache in the system stores previously visited websites). To resolve this issue, clear the DNS cache before setting up the URL Filter. To set up a URL filter: 1. From the navigation panel, go to Advanced Settings > Firewall > URL Filter tab. 2.
4.4.6 Schedule Rule Each access control rule can be activated at a pre-defined scheduled time. You can define the schedule rule in the Schedule Rule page, and apply the rule in the Access Control page.
4.5 Administration 4.5.1 System The System page allows you to configure your wireless router settings. To set up the System settings: 1. From the navigation panel, go to Advanced Settings > Administration > System tab. 2. You can configure the following settings: • Administrator Password: You can change the password and login name for the wireless router by entering a new name and password. • Login Timeout: Most Web administrators set this property to 10 minutes.
• P ort of Web Access from WAN: Specify the port number of the web server allowed to access the wireless router settings. 3. Click Apply. 4.5.2 Firmware Upgrade NOTE: Download the latest firmware from the ASUS website at http://www.asus.com To upgrade the firmware: 1. From the navigation panel, go to Advanced Settings > Administration > Firmware Upgrade tab. 2. In the New Firmware File field, click Browse to locate the downloaded file. 3. Click Upload.
4.6 System Log System Log contains your recorded network activities. NOTE: System log resets when the router is rebooted or powered off. To view your system log: 1. From the navigation panel, go to Advanced Settings > System Log. 2. You can view your network activities in this page: 3. (Optional) Click Save to export the system logs.
4.7 Network Tools 4.7.1 Ping A ping test determines the latency (communication delay) between ASUS router and another server (such as www.google. com) on a network by sending multiple ICMP packets and listening for the replies. Enter a host name or IP address to perform a Ping. The test results display the shortest, the average and the maximum round-trip times and packet loss rate between hosts.
4.7.2 Traceroute The Traceroute test (also known as trace route or tracert) will trace the route that test packets take from one server destination to another. The test results provide a list of hosts or IP addresses showing the route taken by the test packets starting from the selected monitoring location to the destination Domain or IP (such as www.google.com) .
4.7.3 WAN Capture The WAN Capture allows you to capture all packets that pass through the Mobile Broadband Network. To capture your router’s WAN packets: 1. To start capturing the packets, click Start. The browser starts to download the pktDump.cap file to your computer. 2. To stop capturing the packets, click Stop. The browser terminates capturing the packets and completes downloading the pktDump.cap file. NOTE: An external application like Wireshark is required to view the captured packets in the file.
5 Frequently Asked Questions (FAQs) Cannot access the router GUI using a web browser. • Hardware Configuration: • If your computer is wired, check the Ethernet cable connection and LED status. • Failed to log in: • Ensure that you are using the correct login information. The default factory login name and password is “admin/admin”. Ensure that the Caps Lock key is disabled when you enter the login information. • DNS Cache result to wrong DNS: • Delete the cookies and files in your web browser.
The client cannot establish a wireless connection with the router. • Out of Range: • Move the router closer to the wireless client. • Try to adjust antennas of the router to the best direction as described in section 1.4 Positioning your router. • DHCP server has been disabled: • Launch the web GUI. Go to General > Network Map > Clients and search for the device that you want to connect to the router.
• Check the status indicators on the wireless router. If the Internet LED on the wireless router is not ON, check if all cables are plugged properly. Forgot the SSID (network name) or network password: • S et up a new SSID and encryption key via a wired connection (Ethernet cable). Launch the web GUI, go to Network Map, click the router icon, enter a new SSID and encryption key, and click Apply. • Reset your router to the default settings.
Appendices Notices ASUS Recycling/Takeback Services ASUS recycling and takeback programs come from our commitment to the highest standards for protecting our environment. We believe in providing solutions for you to be able to responsibly recycle our products, batteries, other components, as well as the packaging materials. Please go to http://csr.asus. com/english/Takeback.htm for the detailed recycling information in different regions.
Declaration of Conformity for R&TTE directive 1999/5/EC Essential requirements – Article 3 Protection requirements for health and safety – Article 3.1a Testing for electric safety according to EN 60950-1 has been conducted. These are considered relevant and sufficient. Protection requirements for electromagnetic compatibility – Article 3.1b Testing for electromagnetic compatibility according to EN 301 489-1 and EN 301 489-17 has been conducted. These are considered relevant and sufficient.
Radio Frequency (RF) Exposure Information The radiated output power of the ASUS Wireless Device is below the Industry Canada (IC) radio frequency exposure limits. The ASUS Wireless Device should be used in such a manner such that the potential for human contact during normal operation is minimized.
Son fonctionnement est soumis aux deux conditions suivantes: (1) cet appareil ne doit pas causer d’interférence et (2) cet appareil doit accepter toute interférence, notamment les interférences qui peuvent a ecter son fonctionnement.
Preamble The licenses for most software are designed to take away your freedom to share and change it. By contrast, the GNU General Public License is intended to guarantee your freedom to share and change free software--to make sure the software is free for all its users. This General Public License applies to most of the Free Software Foundation’s software and to any other program whose authors commit to using it.
We protect your rights with two steps: (1) copyright the software, and (2) offer you this license which gives you legal permission to copy, distribute and/or modify the software. Also, for each author’s protection and ours, we want to make certain that everyone understands that there is no warranty for this free software.
of running the Program is not restricted, and the output from the Program is covered only if its contents constitute a work based on the Program (independent of having been made by running the Program). Whether that is true depends on what the Program does. 1.
the program under these conditions, and telling the user how to view a copy of this License. (Exception: if the Program itself is interactive but does not normally print such an announcement, your work based on the Program is not required to print an announcement.) These requirements apply to the modified work as a whole.
cost of physically performing source distribution, a complete machine-readable copy of the corresponding source code, to be distributed under the terms of Sections 1 and 2 above on a medium customarily used for software interchange; or, c) Accompany it with the information you received as to the offer to distribute corresponding source code.
Therefore, by modifying or distributing the Program (or any work based on the Program), you indicate your acceptance of this License to do so, and all its terms and conditions for copying, distributing or modifying the Program or works based on it. 6. Each time you redistribute the Program (or any work based on the Program), the recipient automatically receives a license from the original licensor to copy, distribute or modify the Program subject to these terms and conditions.
on consistent application of that system; it is up to the author/ donor to decide if he or she is willing to distribute software through any other system and a licensee cannot impose that choice. This section is intended to make thoroughly clear what is believed to be a consequence of the rest of this License. 8.
NO WARRANTY 11 BECAUSE THE PROGRAM IS LICENSED FREE OF CHARGE, THERE IS NO WARRANTY FOR THE PROGRAM, TO THE EXTENT PERMITTED BY APPLICABLE LAW. EXCEPT WHEN OTHERWISE STATED IN WRITING THE COPYRIGHT HOLDERS AND/OR OTHER PARTIES PROVIDE THE PROGRAM “AS IS” WITHOUT WARRANTY OF ANY KIND, EITHER EXPRESSED OR IMPLIED, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE. THE ENTIRE RISK AS TO THE QUALITY AND PERFORMANCE OF THE PROGRAM IS WITH YOU.
For Turkey only Authorised distributors in Turkey: BOGAZICI BIL GISAYAR SAN. VE TIC. A.S. Tel. No.: +90 212 3311000 Address: AYAZAGA MAH. KEMERBURGAZ CAD. NO.10 AYAZAGA/ISTANBUL CIZGI Elektronik San. Tic. Ltd. Sti. Tel. No.: +90 212 3567070 Address: CEMAL SURURI CD. HALIM MERIC IS MERKEZI No: 15/C D:5-6 34394 MECIDIYEKOY/ ISTANBUL KOYUNCU ELEKTRONiK BiLGi iSLEM SiST. SAN. VE DIS TIC. A.S. Tel. No.: +90 216 5288888 Address: EMEK MAH.ORDU CAD. NO:18, SARIGAZi, SANCAKTEPE ISTANBUL AEEE Yönetmeliğine Uygundur.
ASUS Contact information ASUSTeK COMPUTER INC. (Asia Pacific) Address Website 15 Li-Te Road, Peitou, Taipei, Taiwan 11259 www.asus.com.tw Technical Support Telephone Support Fax Online support +886228943447 +886228907698 support.asus.com ASUS COMPUTER INTERNATIONAL (America) Address Telephone Fax Website Online support 800 Corporate Way, Fremont, CA 94539, USA +15107393777 +15106084555 usa.asus.com support.asus.
Networks Global Hotline Information Region Country 70 Service Hours 09:00-13:00 ; 14:00-18:00 Mon-Fri 09:00-18:00 Mon-Fri Cyprus 800-92491 France Hungary 0033-170949400 0049-1805010920 0049-1805010923 (component support) 0049-2102959911 ( Fax ) 0036-15054561 Italy 199-400089 Greece 00800-44142044 Austria Netherlands/ Luxembourg Belgium Norway Sweden Finland Denmark Poland Spain Portugal Slovak Republic Czech Republic Switzerland-German Switzerland-French Switzerland-Italian United Kingdom Irela
Networks Global Hotline Information Region Country Australia New Zealand Japan Korea Thailand Asia-Pacific Singapore Malaysia Philippine India India(WL/NW) Indonesia Americas Hotline Numbers 1300-278788 0800-278788 0800-1232787 0081-473905630 ( Non-Toll Free ) 0082-215666868 0066-24011717 1800-8525201 0065-64157917 0065-67203835 ( Repair Status Only ) 0060-320535077 1800-18550163 1800-2090365 0062-2129495000 500128 (Local Only) Vietnam 1900-555581 Hong Kong USA Canada Mexico 00852-35824770 1-812-
Networks Global Hotline Information Region Middle East + Africa Country Egypt Saudi Arabia UAE Turkey South Africa Israel Romania Bosnia Herzegovina Bulgaria Balkan Countries Croatia Montenegro Serbia Slovenia Estonia Latvia Lithuania-Kaunas Lithuania-Vilnius Hotline Numbers 800-2787349 800-1212787 00971-42958941 0090-2165243000 0861-278772 *6557/00972-39142800 *9770/00972-35598555 0040-213301786 Service Hours 09:00-18:00 Sun-Thu 09:00-18:00 Sat-Wed 09:00-18:00 Sun-Thu 09:00-18:00 Mon-Fri 08:00-17:00 M
