E16054 Third Edition / October 2019 ROG kunai GAMEPAD (ZS660KLCL_A) (ZS660KLCL_AD) User Guide
E16054 October 2019 Third Edition ROG Phone Accessory (ROG Kunai Gamepad) Model: ZS660KLCL_A / ZS660KLCL_AD Contents Safety notices for your ROG Kunai Gamepad.................................................................3 Specifications summary.....................................4 Product overview.................................................4 Hardware features................................................6 Device charging....................................................7 Device connection....
Safety notices for your ROG Kunai Gamepad WARNING! • This product should only be used in environments with ambient temperatures between 5°C (41°F) and 35°C (95°F). • The power adapter may become warm to hot while in use. Do not cover the adapter and keep it away from your body while it is connected to a power source. • Do not leave your ROG Kunai Gamepad connected to the power source once it is fully charged.
Specifications summary Product Name ROG Kunai Gamepad Platform Android V4.0 or later Connection Wired USB Type-C Wireless RF 2.4Ghz Bluetooth v4.2 Dimensions 141 x 102 x 53mm Battery Up to 7 hours in wireless mode Dongle DC 5V (USB Type-A) RF 2.4Ghz 2 x ROG Kunai controllers 1 x ROG Kunai holder 1 x ROG Kunai bumper Package contents 1 x Type-C to USB cable 1 x Type-C to 3.
ROG Kunai controllers ROG Kunai holder ROG Kunai bumper The ROG Kunai controllers have basic action buttons and can be applied on either the ROG Kunai holder or the ROG Kunai bumper. A holder, with built-in battery and RF/Bluetooth dual module, provides users not only an ergonomic feeling but multiple connection choices. A ROG Phone II proprietary bumper, which provides a wired connection between the mobile and ROG Kunai controllers to achieve zero latency.
Hardware features Front view Home Profile Function Start Select Left thumbstick Individual D-Pad Aura lighting bar Right thumbstick Rear view Mode switch Bumper (R1) Bumper (R2) Bumper (L1) Bumper (L2) Trigger (R2) Trigger (L2) Reset button Multifunction (M3) Multifunction (M4) RF receiver Multi-function (M1) Multi-function (M2) NOTE: Trigger L2(R2) and Bumper L2(R2) share the same keybind. Pressing either the Trigger or the Bumper will active the same shortcut key (L2 or R2).
Top view L2 R2 LED indicator USB Type-C connector Device charging To charge your ROG Kunai Gamepad: 1. Move the mode switch on the rear side of the ROG Kunai holder to USB. 2. Connect the USB cable to your Gamepad and a PC or a power adapter. Device connection A. • Wired connection Using the ROG Kunai bumper Follow the steps below to use your phone with the ROG Kunai bumper. 1. Place your ROG Phone into the ROG Kunai bumper.
2. Slide down the ROG Kunai controllers onto the ROG Kunai bumper. Supported Supported NOT supported Removing the ROG Kunai bumper Orientate the ROG Kunai bumper upright and then remove it from the upper left corner.
• Using the ROG Kunai holder Follow the steps below to use your phone with the ROG Kunai holder. 1. Move the mode switch on the rear side of the ROG Kunai holder to USB. 2. Slide down the ROG Kunai controllers into the ROG Kunai holder. 3. Plug the USB Type-C cable into your Gamepad and your USB hub, and then connect your phone to the USB hub properly.
B. Wireless connection • Via Bluetooth Follow the steps below to connect your phone with the Gamepad via Bluetooth. 1. Move the mode switch on the rear side of the ROG Kunai holder to Bluetooth. 2. Slide down the ROG Kunai controllers into the ROG Kunai holder. 3. Press the Home button for 5 seconds until the LED indicator blinks blue to indicate that the Gamepad enters pairing mode. 4. Turn on Bluetooth on your ROG Phone and search for Bluetooth devices.
• Via RF Follow the steps below to connect your phone with the Gamepad via RF. 1. Move the mode switch on the rear side of the ROG Kunai holder to RF. 2. Slide down the ROG Kunai controllers into the ROG Kunai holder. 3. Plug the RF receiver into your USB hub, and then connect your phone to the USB hub properly. 4. Phone Press the Home button to power on your Gamepad. Then it will connect to the RF receiver automatically.
• If the LED stops blinking and turns solid, your Gamepad has been successfully connected. • If your Gamepad fails to connect to the RF receiver, you can: a) Disconnect and re-plug the RF receiver. b) Long press the Home button to pair your Gamepad and the RF receiver again. The LED indicator will rapidly flash during this process.
Notices Federal Communications Commission Statement This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: • This device may not cause harmful interference. • This device must accept any interference received including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
CAUTION! The use of shielded cables for connection of the monitor to the graphics card is required to assure compliance with FCC regulations. Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user’s authority to operate this equipment. CE Mark Warning English ASUSTeK Computer Inc. hereby declares that this device is in compliance with the essential requirements and other relevant provisions of related Directives.
India RoHS This product complies with the “India E-Waste (Management) Rules, 2016” and prohibits use of lead, mercury, hexavalent chromium, polybrominated biphenyls (PBBs) and polybrominated diphenyl ethers (PBDEs) in concentrations exceeding 0.1% by weight in homogenous materials and 0.01 % by weight in homogenous materials for cadmium, except for the exemptions listed in Schedule II of the Rule.