Quick Install Guide

新竹科學工業園區展業二路 12 號 2 樓 2F, No. 12, Prosperity Rd. II, Science-Based Industrial Park, Hsinchu, TAIWAN
TEL：[phone] FAX：[phone] Website : www.asuka-autotronics.com
Quick Install Guide
WiFi/BT/GPS RF Module
Model Name: AK-6630
Product Spec:
Brand/Model: Asuka/AK-6630
RF Frequency Range: 2.4~2.4835GHz
Wireless Standard:
WiFi: IEEE 802.11b/g/n
BT: 4.1 BR/EDR
GNSS: GPS(US)
Connect Interface: SDIO
1. Connect Platform:
Install AK-6630 into ASUKA Product.
2. Connect the External Antenna:
3. Turn on the product , found [SETTING] -->
[WiFi]. When searching WiFi successfully,
that is finished (As below).
FCC ID: 2AOG5-6630
FCC Compliance Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to
the following two conditions: (1) this device may not cause harmful
interference, and (2) this device must accept any interference received,
including interference that may cause undesired operation.
This equipment has been tested and found to comply with the limits for a
Class B digital device, pursuant to part 15 of the FCC Rules. These limits
are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates, uses
and can radiate radio frequency energy and, if not installed and used in
accordance with the instructions, may cause harmful interference to radio
communications. However, there is no guarantee that interference will
not occur in a particular installation. If this equipment does cause harmful
interference to radio or television reception, which can be determined by
turning the equipment off and on, the user is encouraged to try to correct
the interference by one or more of the following measures:
—Reorient or relocate the receiving antenna.
—Increase the separation between the equipment and receiver.
—Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected.
—Consult the dealer or an experienced radio/TV technician for help.
Any changes or modifications not expressly approved by the party
responsible for compliance could void the authority to operate
equipment.
This device and its antenna must not be co-located or operating in
conjunction with any other antenna or transmitter.
FCC Radio Frequency Exposure
This equipment complies with FCC radiation exposure limits set forth for
an uncontrolled environment. This equipment should be installed and
operated with minimum distance 20cm between the radiator & your
body.
Warning
This module is intended for OEM integrator. The OEM integrator is still
responsible for the FCC compliance requirement of the end product,
which integrates this module. 20cm minimum distance has to be able to
be maintained between the antenna and the users for the host this
module is integrated into. Under such configuration, the FCC radiation
exposure limits set forth for an population/uncontrolled environment can
be satisfied.
Any changes or modifications not expressly approved by the
manufacturer could void the user's authority to operate this equipment.