ASTROS POD AP2-11 / AP2-12 User Manual Astrogate Inc.
1 What’s in the box 1. Single package or Dual package ⚫ Single package ⚫ Dual package 2. Quick Start Guide ASTROS Pod overview LED Share Button Function Button USB-C, Power Rating: 5V 900mA How to start using ASTROS Pod 1. Pair your Pod with an ASTROS Station Step 1. Connect the Pod to the USB-C on the well-configured Station front panel to start pairing mode. Step 2. LED breathing green: pairing LED steady green: pairing finished You may check the main screen message for pairing status. Step 3.
2 2. Start the presentation Step 1. Connect the Pod to your laptop’s USB-C port and wait until the LED remains light blue. If LED is pink, your device does not support USB-C A/V output. Step 2. For AP2-11 The Pod will automatically start screen sharing when ready. Disconnect the Pod if you wish to stop sharing. Long press the Share Button to switch between full-screen and split-screen. Step 2.
3 Federal Communications Commission (FCC) Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
