UPLINK C40 TR Controller PC Setup Guide (https://blog.astrogaming.com/2019/03/c40-tr- ASTRO AUD pc-setup/) (https://blog ASTRO GAMING BLOG (HTTPS://BLOG.ASTROGAMING.COM/) (https://blog.astrogaming.com/) ASTRO NEWS (HTTPS://BLOG.ASTROGAMING.COM/CATEGORY/ASTRO-NEWS/) C40 TR Controller PS4 Setup Guide Lindsay Geektron (https://blog.astrogaming.com/author/lindsaygeektron/) - 03/26/2019 (https://blog.astrogaming.
Con guration // Firmware Before use, this product may require a rmware update. [1] Download the ASTRO C40 TR Con guration Software from astrogaming.com/software (https://www.astrogaming.com/customer-service/ rmware-and-software/software.html). Please make sure that you are downloading the C40 TR Con guration Software and not ASTRO Command Center as ACC is not compatible with the C40 TR Controller. [2] Ensure the C40 TR Controller is in Wired Mode.
[4] Plug the USB-A end of the micro-USB cable into an available USB port on your PC or Mac. [5] Run the ASTRO C40 TR Con guration Software. You will automatically be prompted to update the rmware of your controller after launching the C40 TR Con guration Software. [6] Click on the Update Now button and follow the on-screen prompts to update the rmware on your controller. [7] To update your USB Wireless Transmitter, rst disconnect the C40 TR Controller from your PC or Mac.
[9] To check for rmware updates, click on the Con guration Wheel located at the top right corner of the software window. Follow the on-screen prompts to update the rmware. [10] That’s it! Your C40 TR Controller is ready to go! Con guration // Wired Mode [1] Power on your PS4 console.
[2] Ensure the C40 TR Controller Mode Switch is set to Wired. [3] Plug the micro end of the micro-USB cable into the C40 TR Controller.
[4] Plug the USB-A end of the micro-USB cable into an available USB port on your PS4. [5] Press the PS button.
[6] That’s it! Your C40 TR Controller is ready to game. Con guration // Wireless Mode [1] Power on your PS4 console. [2] Ensure the C40 TR Controller Mode Switch is set to Wireless.
[3] Plug the USB Wireless Transmitter into an available USB port on your PS4. A blue light will appear on the USB Wireless Transmitter. [4] Press the PS Button.
[5] That’s it! Your C40 TR Controller is ready to game! Con guration // Swappable Modules [1] The Analog Stick Modules and the D-Pad Module are removable and swappable. [2] Using the C40 TR Tool, unscrew the 4 screws on the Faceplate of the C40 TR Controller. We strongly recommend removing the screws in a star pattern (upper right, bottom left, bottom right, upper left). The screws will remain attached to the Faceplate.
[3] When swapping modules, ensure the red line located on the bottom of the module align with the red line located on the controller. [4] When the modules are in the desired con guration, replace the controller Faceplate and tighten the screws using the C40 TR Tool in the same star pattern.
[2] Press and hold both the Start and Share Buttons simultaneously for 5 seconds. The C40 TR Controller will then enter into pairing mode. The LED Indicator will blink white once. [3] Press and hold the LED Button on the USB Wireless Transmitter for 5 seconds. The Transmitter will then enter into pairing mode. The LED on the USB Wireless Transmitter will ash on blue.
[4] After a few seconds the C40 TR Controller and USB Wireless Transmitter will pair. The USB Transmitter and C40 TR Controller LED will turn solid once pairing is completed. [5] That’s it! Your C40 TR Controller is ready to go! ASTRO C40 TR Con guration Software The ASTRO C40 TR Controller has additional customization options via the ASTRO C40 TR Con guration Software, available at astrogaming.com/software.
playstation-4-pc-hyped-%e2%9c%94/) POWERED BY WORDPRESS (HTTPS://WORDPRESS.ORG/) | THEME: GREATMAG PRO (HTTP://ATHEMES.COM/THEME/GREATMAG-PRO) BY ATHEMES.