Combo BLE User Guide 2019-09-27
Device Preparation(Power On/OFF and Charging) Button Charging module - Press and hold both buttons on the device to turn it on - Charge the device by connecting the charger to the charging module on the back of the device.
UserApp Manual 1. Launch app and activate Bluetooth - If the Bluetooth function is not activated when you run the app, you will be asked to turn it on. Select 'Allow' to activate the Bluetooth function. - Location permission is required to use the app. In the window asking for permission to choose your location, select "Allow.
UserApp Manual 2. Main Display BLE device scan button Display app version and SDK version Status bar Scan Mode change Auto connect progress bar Bar code and tag information display Power ON/OFF Barcode and Tag Reading Clear all barcode and tag information Stop reading barcodes and tags The number of barcodes and tags read is displayed. Displays the connection status of the device. When connected with a device, it changes to ‘Connected'. Displays battery information of the device.
UserApp Manual 3.BLE device Scan and Connection 1. If there is an existing connected device when running the app, it checks whether the connection is possible. If the connection is possible, connect with the previously connected device (automatic connection). 2. If you do not have an autoconnected device or want to connect to a new device, press the BLE Device Scan button on the top left of the app to scan the BLE device.(Scan for 10 seconds) 3.
UserApp Manual 4. Barcode and RFID Scan Device Connect Barcode and Tag Readig 1. When the device is connected, 'Disconnected' in the Stauts Bar changes to 'Connected' and the device is automatically powered on. 2. Select the desired mode. Barcode mode, RFID mode, Dual mode can be selected, and if you select Dual mode, both barcode and RFID tag can be read. 3. Read the tag by pressing both buttons on the device at the same time or by using the Read button in the App. Use the Stop button to stop reading.
FCC Information to User This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.