Use Instructions

ManualsBrandsAsteria Technology ManualsElectronicsGravio Zigbee Receiver 2

Table Of Contents

Product overview
- After inserting the device, windows10 will automatically load the driver and open the hardware manager. This interface appears. This means your device is ready to go.
Instructions for use

Gravio Zigbee Receiver 2

Instructions for use

Product overview

Gravio Zigbee Dongle 2gen is a wireless command transmitter based on the zigbee

protocol. It can interact with the wireless sensor in hex code based on the serial

protocol and issue commands. This device supports operating systems such as

windows10/mac/linux. Gravio Zigbee Dongle 2gen adopts usb forward and reverse

insertion design, and can be inserted into the usb interface on either side for

normal use. You can send and receive information by using serial port software such

as sscom. Complete the instructions.

Summary of content (8 pages)

PAGE 1
Gravio Zigbee Receiver 2 Instructions for use Product overview Gravio Zigbee Dongle 2gen is a wireless command transmitter based on the zigbee protocol. It can interact with the wireless sensor in hex code based on the serial protocol and issue commands. This device supports operating systems such as windows10/mac/linux. Gravio Zigbee Dongle 2gen adopts usb forward and reverse insertion design, and can be inserted into the usb interface on either side for normal use.
PAGE 2
Gravio Zigbee Dongle 2gen is based on the certification-free protocol of organizations such as whql. It can be used without driver on windows10/mac/linux, just plug in the usb-A interface.
PAGE 3
The driver display has com port After inserting the device, windows10 will automatically load the driver and open the hardware manager. This interface appears. This means your device is ready to go. Instructions for use First open the serial debugging assistant, such as sscom, set the baud rate to 115200, open the serial port after 8N1.
PAGE 4
>> send : 00 00 01 00 00 AA >>receive : 00 01 01 08 02 00 03 AA as shown in the figure Scan to build a zigbee network >> send : 00 00 03 00 00 AA >> receive : 00 01 03 08 01 00 AA Read current network information >> send : 00 00 04 00 00 AA >> receive : 00 01 04 08 0E 36 3F 32 FE FF 9F FD 90 01 01 C0 76 0F 13 AA Open to allow devices to access the network >> send : 00 00 10 00 01 FF AA >> receive : 00 01 10 08 01 00 AA Sensor support： Door and Window Sensor
PAGE 5
near >> 00 1C 01 18 10 F9 68 04 02 00 8D 15 00 01 06 00 01 00 00 10 00 AA Far away>> 00 1D 01 18 10 F9 68 04 02 00 8D 15 00 01 06 00 01 00 00 10 01 AA Wireless Mini Switch >>press : 00 38 01 18 11 09 67 B0 02 00 8D 15 00 01 12 00 01 55 00 →21 01 00 AA >> long press : 00 39 01 18 11 09 67 B0 02 00 8D 15 00 01 12 00 01 55 00 21 10 →00 AA >> Long press release : 00 3A 01 18 11 09 67 B0 02 00 8D 15 00 01 12 00 01 55 00 21 11 →00 AA
PAGE 6
Temperature and Humidity Sensor ： This temperature and humidity sensor supports reporting temperature values, relative humidity, and atmospheric pressure, so there are three types of reported data: >> send : 00 40 01 18 11 6F FA 3C 02 00 8D 15 00 01 02 04 01 00 00 29 BD 0A AA >> send : 00 41 01 18 11 6F FA 3C 02 00 8D 15 00 01 05 04 01 00 00 21 02 22 AA >> send: 00 42 01 18 1A 6F FA 3C 02 00 8D 15 00 01 03 04 03 00 00 29 F2 03 14 →00 28 FF 10 00 29 7D 27 AA Temperature and Humidity Sensor (model: WSDCG
PAGE 7
Door and Window Sensor (model: MCCGQ11LM) >> near send : 00 33 01 18 10 F9 68 04 02 00 8D 15 00 01 06 00 01 00 00 10 00 AA >> far away : 00 34 01 18 10 F9 68 04 02 00 8D 15 00 01 06 00 01 00 00 10 01 AA static post： There are three types of data reported by the static post, as follows:
PAGE 8
>> send data : 00 7A 01 18 15 FB 3B B2 02 00 8D 15 00 01 01 01 01 08 05 25 8A FF →1A 04 F9 00 AA >> send data : 00 7C 01 18 16 FB 3B B2 02 00 8D 15 00 01 01 01 02 55 00 21 02 00 →03 05 21 06 00 AA >> send data : 00 7E 01 18 11 FB 3B B2 02 00 8D 15 00 01 01 01 01 55 00 21 01 00 →AA FCC Warning Statement Changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment.