User's Manual

ManualsBrandsASTERA ManualsElectronicsPixel Bar

Users Manual / Gebrauchsanleitung / Manuale di istruzioni /

Manual de instrucciones / Manuel d‘instructions / Manual de instruções

Model No: PixelBar AX2-50 / AX2-100 --- Manual Version: 1.0 --- Date of Issue: 09/17/20

// English 2-6 // Deutsch 7-11 // Italiano 12-16 //

// Espanol 17-21 // Francais 22-26 // Português 27-31 //

AX2

100

PIXELBAR

AX2

PIXELBAR

AX2

100

PIXELBAR

AX2

PIXELBAR

Astera LED Technology GmbH

Stahlgruberring 36

81829 Munich

Germany

info@astera-led.com | www.astera-led.com

Summary of content (4 pages)

PAGE 1
00 AX2 50 AX2 PIXELBAR AX2 50 PIXELBAR AX2 100 PIXELBAR PIXELBAR Users Manual / Gebrauchsanleitung / Manuale di istruzioni / Manual de instrucciones / Manuel d‘instructions / Manual de instruções Model No: PixelBar AX2-50 / AX2-100 --- Manual Version: 1.0 --- Date of Issue: 09/17/20 // // English 2-6 // Deutsch 7-11 // Italiano 12-16 // Espanol 17-21 // Francais 22-26 // Português 27-31 Astera LED Technology GmbH Stahlgruberring 36 81829 Munich Germany info@astera-led.com | www.astera-led.
PAGE 2
English SECONDARY PROTECTION The AX2-50/-100 PixelBar must always be secured by a safety wire when used in a hanging position. If the primary suspension fails, the device must not fall more than 20cm. SAFETY INFORMATION Before you operate this unit read the manual carefully. Always make sure to include the manual if you pass/ rent/ sell the unit to another user. Keep in mind that this manual cannot address all possible dangers and environments. Please use your own caution when operating.
PAGE 3
CLEANING AND MAINTAINING 3. Switching ON or OFF Caution: Liquids entering the housing of the device can cause a short circuit and damage the electronics. Do not use any cleaning agents or solvents. 1s 3s ON PRODUCT OVERVIEW USING THE AX2 PIXELBAR 5s 1x 3x OFF Please not: a new AX2-50/-100 needs a few seconds of charge to disable its shipping mode. 1. Control options - integrated control panel Use the menu buttons ( menu, +, - ,enter ) to navigate through the main menu.
PAGE 4
7. Hanging 8. Connecting several AX2 with BarConnect+ The Airline tracks at back and bottom of the AX2-50/-100 housing are used to attach optionally available mounting fittings. The AX2-50/-100 can be mounted using TrackPins (AX-TP) and Superclamps/GripHeads or hung up using the TrackHangers (AX-TH) or FlyBar (AX2-FB) for vertical position. When hanging, secure with a safety wire. This should be attached to the safety hooks at the back of the AX2-50/-100 housing.