Operator's Manual
Table Of Contents
- Remootio installation manual
- Step 1 - Unboxing
- Step 2 - Read the instruction manual carefully and follow the instructions
- Step 3 - Remove the plastic cover
- Step 4 - Connect the control output of the Remootio unit to the appropriate input terminals of your gate or garage door.
- Step 6 - Connecting an accessory
- Step 7 - Assemble the Remootio unit back together
- Step 8 - Powering Remootio
- Step 9 - Download the Remootio app
- Step 10 - Set up the Remootio unit
- Safety instructions
Remootio installation manual
Thank you for choosing Remootio!
Make sure you carefully read and understand operator's manual
and all other safety instructions before using this product.
Before you begin, make sure that the circuit breaker of the gate
or garage door is switched off and there is no power in the system.
Installation of Remootio 2 requires technical skills.
Please always consult with or ask a professional to do the installation.
A more detailed installation manual is available on our website:
https://www.remootio.com/blogs/tutorials/remootio-2-installation-manual
Step 1 - Unboxing
Open the box and remove the Remootio device. The wires, double-sided adhesives
and the sensor can be found under the removable paper insert.