Certification Exhibit FCC ID: U4A-MODBLE9052 IC: 6982A-MODBLE9052 FCC Rule Part: 15.247 IC Radio Standards Specification: RSS-247 ACS Project Number: 15-0143 Manufacturer: Assa Abloy Inc. Model: BLE9052 5015 B.U.
Manual Assa Abloy: Sargent Manufacturing and Corbin Russwin Factory Installation Instructions Factory Installation Instructions for P 1\2\WI1\IP1 reader assemblies Models BIKMPS, BIMPS, BCKMP and BCMP with Bluetooth Smart Model BLE9052 Assembly: 52-9052 RF Module. FCC Specific Statement: “NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Users in the USA and Canada English: Operation is subject to the following two conditions: This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Assembly Drawings and Instructions: 52-4894TAB 52-4889 Factory Configuration Instructions: The assembly 52-9052-0000-000 P 1\2\WI1\IP1 BT shall be programmed at the manufacturing facility with firmware. The firmware version to be programmed into the unit shall be V5.09, which applies an advertising rate of 20ms and a RSSI tap sensitivity of -55dB.
09/15 Copyright © 2015, ASSA ABLOY Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
09/15 Copyright © 2015, ASSA ABLOY Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
09/15 Copyright © 2015, ASSA ABLOY Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Inc. is prohibited.
09/15 Copyright © 2015, ASSA ABLOY Inc. All rights reserved. Reproduction in whole or in part without the express written permission of ASSA ABLOY Inc. is prohibited.