Quick Reference Guide DRAFT ZigBee Gateway 1
Copyrights The information in this document is subject to change at the sole discretion of ASSA ABLOY AB without notice. Any use, operation or repair in contravention of this document is at your own risk. ASSA ABLOY AB does not assume any responsibility for incidental or consequential damages arising from the use of this manual. All information and drawings in this document are the property of ASSA ABLOY AB. Unauthorized use and reproduction is prohibited.
Table of contents FCC and IC statements ..................................................................................................................... 4 FCC statements .............................................................................................................................................. 4 IC statements .............................................................................................................................................. 4 Gateway dimensions .............
FCC and IC statements FCC (Federal Communications Commission) statements This device comply with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
Under Industry Canada regulations, this radio transmitter may only operate using an antenna of a type and maximum (or lesser) gain approved for the transmitter by Industry Canada. To reduce potential radio interference to other users, the antenna type and its gain should be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that necessary for successful communication.
Gateway dimensions Figure 1 6 DRAFT 66 3081 060-0
Quick reference of technical data Note: For more information about the gateway (e.g. about web interface, reset, boot-up, commissioning the gateway in a ZigBee system etc), see User manual Online option. Figure 2 Automatic adjustment to 10 or 100 Mbit/s networks Powered via Ethernet or by a power adapter (5VDC) Note: The gateway is of PoE class 1; power range 0.44-3.84W.
To mount a gateway Preferred way of mounting the gateway is horizontally: Figure 3 8 DRAFT 66 3081 060-0
Asia / Pacific: E-mail: apac@vingcardelsafe.com Phone: +65 6305 7670 Europe / Middle East / Africa: E-mail: emea@vingcardelsafe.com Phone: +47 69 24 50 00 Latin America: E-mail: lam@vingcardelsafe.com Phone: +52 55 36 40 12 00 North America: E-mail: northamerica@vingcardelsafe.com Phone: +1 972 907 2273 ASSA ABLOY Hospitality – P.O. Box 340 – 1402 Ski – Norway – Phone: +47 69 24 50 00 info@vingcardelsafe.com | www.vingcardelsafe.