Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) ASSA ABLOY Installation of BLE Module 681402004 ASSA ABLOY HOSPITALTY AS.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 2 (13) Copyrights The information in this document is subject to change at the sole discretion of ASSA ABLOY Hospitality AS without notice. Any use, operation or repair in contravention of this document is at your own risk.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 3 (13) Installation of BLE Module 681402004 BLE Module 681402004 is only used in Assa Abloy Hospitality AS products. The BLE Module 681402004 is factory mounted in the Assa Abloy Hospitality AS products which in this document are referred to as “The Host System”.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 4 (13) Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 5 (13) BLE Module 681402004 Installation Since the BLE Module 681402004 is not and will not be supplied to the end user on its own and the BLE Module 681402004 will only be installed and or replaced on the Host Systems by Assa Abloy Hospitality AS Engineers; only a quick generic installation guide of the BLE Module 681402004 to t
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 6 (13) Installation Procedure Y-Cable Zigbee Endnode Classic Assy.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 7 (13) A mounted BLE Module in the housing and Y-Cable connected To Host System BLE Module with Y-Cable connected and Screw Standoff mounted, covered by the BLE shield.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 7)Host system label concerning BLE Page (of) 8 (13) The Host System label indicating the presence of the BLE module in the system should be attached as indicated: Host Label indicating the presence of BLE module with FCC and IC Identification Installed the Back Host System cover Front Host system Back Host System Cover ASSA ABLOY HOSP
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 9 (13) BLE Module Replacing Procedure The only tool need is Screwdriver Torx T20S for removing the screws on the Host System. Remove the Host System Cover. Disconnect the Y-Cable connectors (coming from the BLE module) from the Host System, and remove the Host System screws connected to BLE module item 5: Screw standoff.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 From the front side of the Host system, pull out the unit where BLE module is mounted. Page (of) 10 (13) Unmount the BLE shield. Unmount the BLE shield Disconnect the Y-cable from the BLE Module Remove the BLE Module from the BLE housing and replace it. ASSA ABLOY HOSPITALTY AS.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 11 (13) Viewing FCC an IC information label on the Host System All Host Systems where a BLE Module is installed; has an attached label with FCC and IC identities.
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 12 (13) After opening the Back Cover, the Label can be accessed Label on the Host with following statements: Contains FCC ID: Y7V-681402004 Contains IC: 9514A-68102004 Open with Torx T20s screwdriver BLE Module 681402004 Operation BLE Module 681402004 operates only on Assa Abloy Hospitality Host Systems, and is solely installe
Title Installation of BLE Module 681402004 Category Type Installation of BLE Module Author Document number Revision Date Susan Jansson 69 1402 012 8 20150302 Page (of) 13 (13) Overview functionality of the BLE Module When a BLE Module comes from the production, it will be in an ‘advertise’ mode that is always searching for another BLE device. In a hotel environment the BLE Module is set in ‘dormant’ mode and it will search for a BLE device when the Host System tells it to go out and search.