Users Manual Part 3

2. Open fuse cover. Slide open

fuse access cover on top of

attachment plug towards

blades.

1. Grasp plug and remove

from the receptacle or

other outlet device. Do not

unplug by pulling on cord.

3. Remove fuse carefully. Push

the fuse from the other side

or turn fuse holder over to

remove fuse.

4. Replace fuse.

only use 2.5 Amp, 125 Volt

fuse.

5. Close fuse cover. Slide

closed the fuse access

cover on top of attachment

plug.

Fuse Replacement

Turn off your fan and unplug the power from the AC outlet.

PAGE 1
Fuse Replacement Turn off your fan and unplug the power from the AC outlet. 1. Grasp plug and remove from the receptacle or other outlet device. Do not unplug by pulling on cord. 2. Open fuse cover. Slide open fuse access cover on top of attachment plug towards blades. 4. Replace fuse. only use 2.5 Amp, 125 Volt fuse. 3. Remove fuse carefully. Push the fuse from the other side or turn fuse holder over to remove fuse. 5. Close fuse cover. Slide closed the fuse access cover on top of attachment plug.
PAGE 2
Check that all parts are securely locked in place
PAGE 3
This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Warning: Any changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.
PAGE 4
PAGE 5
8
PAGE 6
V ATF 22.1 User Manual_P.