User's Manual

ManualsBrandsAsoka In ManualsElectronicsRF XBOX 2TO1 Host

2.4GHz RF XBOX handle operation instructions

One. Characteristic.

1. High-performance CMOS technology.

2. Transmit frequency 2.4G wirelessly.

3. Operate the distance: 10~15M.

4. Working voltage: 4.5V (the alkaline dry cell of three AAAs).

5. Job electric current: 10 ~18mA (on-line working state).

6. Using the alkaline dry cell of three AAAs the same can be used for more than 18 hours normally in

succession.

7. There is electric dormancy function in provinces (Sleep state electric current is smaller than 2mA).

8. The electric consumption of the battery is not enough to point out the function.

9. Time is 400 hours to wait the opportune moment.

10. Build 8 inside- ADC of bit.

11. Support a pair of vibration mode, can use the vibration switch to make the handle not shake by force .

12. Have Turbo function.

13. Have Macro function.

14. There are 2 LEDs to show the state partly in transmission: Power, Connect instruction.

15. 2 LEDs show the state partly to receive: Power, Connect instruction.

16. Many channels choose the function (support up to 20 handles to work at the same time).

Two. Handle function graphic presentation

1. Part of the receiver

Connect

LED

Connect

But t on

Power

LED

Dual Sl ot s For

Memory Card & Ot her

Peri pheral s

Summary of content (5 pages)

PAGE 1
2.4GHz RF XBOX handle operation instructions One. Characteristic. 1. High-performance CMOS technology. 2. Transmit frequency 2.4G wirelessly. 3. Operate the distance: 10~15M. 4. Working voltage: 4.5V (the alkaline dry cell of three AAAs). 5. Job electric current: 10 ~18mA (on-line working state). 6. Using the alkaline dry cell of three AAAs the same can be used for more than 18 hours normally in succession. 7.
PAGE 2
. Part of the launcher Tur bo Connect Mar co Act i on But t ons ANALOG Cont r ol St i ck Power LED Connect LED Di r ect i onal Pad Back St ar t ANALOG Cont r ol St i ck Anal og Tr i gger Power OFF Power ON/ VI B ON Three. Ordinary operation method. 1. Put through the television and XBOX host computer power. 2. Put XBOX game CD into XBOX host computer. 3.
PAGE 3
glimmers , POWER LED is long and on. 5. If Connect LED on the handle and Connect LED on the receiver turn into long and on showing the communication it can be operated that normal to wait a moment. 6. If Connect LED on the handle and Connect LED on the receiver still glimmer and press the handle or the Connect button on the receiver respectively, make RX LED (communication is pointed out) of the handle and receiver often bright, can operate . Four. Function operation method.
PAGE 4
One) Establishment of Turbo: 1. Push Turbo button continuously, enter Turbo and set up the mode. 2. Then can establish one or a lot of buttons of Turbo. A , B , X , Y , Black , White , Right , Left Triggers can be set up at the same time . 3. Push Turbo button continuously. Pushing the button that has been already established at the same time, this button Turbo function has been removed. Two) Time change. Push Turbo button continuously, then push Start key.
PAGE 5
3. UP, LEFT, DOWN, RIGHT, X, Y, A, B, Right Thumb, Lift Thumb, WHITE, Lift Triggers, BLACK, Right Triggers, 14 different buttons, can be arranged on one Macro. 4. All button of settlement will be removed at cable again. Precautions 1. Can't be soaked with water. 2. Don't turn on the receiver and launcher structure at will. 3. Don't make the receiver and launcher receive the heavy pressure, knowing rival's handle like this causes and damages. 4.