User's Manual

1. User guide
1.1 Description:
WAND is for Nintendo WII game console design game controller, completely compatible original
factory Wii remote, may realize original factory Wii remote all functions on the Wii game main engine.
Use 2.4 G wireless data communication with Wii console. Wireless module frequency coverage:
2402-2480MHz, Channel: 79, data modulation mode: FSK.
In constructs the acceleration sensor and the phantom sensor. Each Wii are most may connect four
handles. The wireless distance may amount to 8-10 mete.
1.2 Use method:
1.2.1. For WAND installment battery.
1.2.2. Connects the Wii peripheral component and the television, opens the power source.
1.2.3. Long press SYNC red button on Wii for10-15 second, causes the Wii to enter the search
mode .If this main engine before has connected this handle (WAND)so long as then presses (maybe 1
second) on the main engine SYNC red button to be possible to enter the search mode.
1.2.4. Press the WAND SYNC key once, Causes WAND to enter the search mode. In not on-line
mode, WAND base LED twinkling, same time to show the battery quantity, 1 LED flickering markup
the battery power is less than 20%, 1-2 LED flickering markup the battery power is around 60%, 1-3
LED flickering markup the battery power is around 80%, 1-4 LED flickering markup the battery
power is around 90%And so on about five seconds WAND can connect the Wii automatically .After
connection on the handle base 1-4 LED can demonstrate the handle and the console company order,
indicates in 1 position is the first handle which connects.

Summary of content (3 pages)