User Manual For WIFI+BT Combo Module AP6356S
x2 Wi-Fi + Bluetooth 4.
General Specification Wi-Fi RF Specification 2.4GHz RF Specification Conditions: VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard Frequency Range Number of Channels Modulation Output Power SISO Receive Sensitivity (11b,20MHz) @8% PER SISO Receive Sensitivity (11g,20MHz) @10% PER IEEE 802.11a/b/g/n/ac & Wi-Fi compliant 2.400 GHz ~ 2.483 GHz (2.4 GHz ISM Band) 2.4GHz:Ch1 ~ Ch13 802.11b : DQPSK, DBPSK, CCK 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11b /11Mbps : 16 dBm ± 1.
MIMO Receive Sensitivity (11g,20MHz) @10% PER SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER Maximum Input Level 802.
SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER SISO Receive Sensitivity (11n,40MHz) @10% PER MIMO Receive Sensitivity (11n,40MHz) @10% PER SISO Receive Sensitivity (11ac,20MHz) @10% PER MIMO Receive Sensitivity (11ac,20MHz) @10% PER - 18Mbps PER @ -86 dBm, +/- 2dB - 24Mbps PER @ -83 dBm, +/- 2dB - 36Mbps PER @ -80 dBm, +/- 2dB - 48Mbps PER @ -75 dBm, +/- 2dB - 54Mbps PER @ -71 dBm, +/- 2dB - MCS=0 PER @ -88 dBm, +/- 2dB - MCS=1 PER @ -85 dBm, +/- 2dB - MCS=
SISO Receive Sensitivity (11ac,40MHz) @10% PER MIMO Receive Sensitivity (11ac,40MHz) @10% PER SISO Receive Sensitivity (11ac,80MHz) @10% PER MIMO Receive Sensitivity (11ac,80MHz) @10% PER Maximum Input Level Antenna Reference - MCS=7, NSS1 PER @ -71 dBm, +/- 2dB - MCS=8, NSS1 PER @ -67 dBm, +/- 2dB - MCS=0, NSS2 PER @ -87 dBm, +/- 2dB - MCS=8, NSS2 PER @ -63 dBm, +/- 2dB - MCS=0, NSS1 PER @ -84 dBm, +/- 2dB - MCS=1, NSS1 PER @ -81 dBm, +/- 2dB - MCS=2, NSS1 PER @ -79 dBm, +/- 2dB - MCS=3, NSS1 PER @ -7
48 5.25GHz~5.35GHz 56 60 64 5.5GHz~5.7GHz 104 108 112 116 120 124 128 132 136 140 5.725GHz~5.845GHz 153 157 161 165 5240 52 5280 5300 5320 100 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 149 5765 5785 5805 5825 5260 5500 5745 Bluetooth Specification Conditions : VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C General Specification Feature Description Bluetooth Standard Bluetooth V4.2 of 1, 2 and 3 Mbps.
Pin Outline Pin Definition NO Name Type Description 1 GND - Ground connections 2 WL/BT_ANT0 I/O RF I/O port0 3 GND - Ground connections 4 GND - Ground connections
5 GND - Ground connections 6 GND - Ground connections 7 GND - Ground connections 8 GND - Ground connections 9 WL_ANT1 I/O RF I/O port1 10 GND - Ground connections 11 GND - Ground connections 12 NC - No connect 13 14 15 16 17 18 19 20 21 22 XTAL_OUT XTAL_IN WL_REG_ON WL_HOST_WAKE SDIO_DATA_CMD SDIO_DATA_CLK SDIO_DATA_3 SDIO_DATA_2 SDIO_DATA_0 SDIO_DATA_1 O I I O I/O I/O I/O I/O I/O I/O External Crystal out External Crystal in/ Single clock source in Low asserting reset for
49 50 BT_WAKE BT_HOST_WAKE Dimensions Package I O HOST wake-up Bluetooth device Bluetooth device to wake-up HOST
MSL Level / Storage Condition
FCC Compliance Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
transmitter. “To comply with FCC RF exposure compliance requirements, this grant is applicable to only Mobile Configurations. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.” Canadian Compliance Statement This device complies with Industry Canada license-exempt RSSs.