User Manual For WIFI+BT Combo Module AP6356S
x2 Wi-Fi + Bluetooth 4.
Block diagram Antenna Layout This is the interface to RF connector, it shows the connection of the module’s antenna pad with an application of antenna.
General Specification Wi-Fi RF Specification 2.4GHz RF Specification Conditions: VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C Feature Description WLAN Standard Frequency Range IEEE 802.11a/b/g/n/ac & Wi-Fi compliant 2.400 GHz ~ 2.483 GHz (2.4 GHz ISM Band) Number of Channels 2.4GHz：Ch1 ~ Ch13 802.11b : DQPSK, DBPSK, CCK 802.11 g/n : OFDM /64-QAM,16-QAM, QPSK, BPSK 802.11b /11Mbps : 16 dBm ± 1.5 dB @ EVM -9dB 802.11g /54Mbps : 15 dBm ± 1.5 dB @ EVM -25dB 802.11n /MCS7 : 14 dBm ± 1.
@10% PER SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER Maximum Input Level 802.
SISO Receive Sensitivity (11n,20MHz) @10% PER MIMO Receive Sensitivity (11n,20MHz) @10% PER SISO Receive Sensitivity (11n,40MHz) @10% PER MIMO Receive Sensitivity (11n,40MHz) @10% PER SISO Receive Sensitivity (11ac,20MHz) @10% PER MIMO Receive Sensitivity (11ac,20MHz) @10% PER SISO Receive Sensitivity - MCS=0 PER @ -88 dBm, +/- 2dB - MCS=1 PER @ -85 dBm, +/- 2dB - MCS=2 PER @ -83 dBm, +/- 2dB - MCS=3 PER @ -80 dBm, +/- 2dB - MCS=4 PER @ -76 dBm, +/- 2dB - MCS=5 PER @ -71 dBm, +/- 2dB - MCS=6 PER @ -7
(11ac,40MHz) @10% PER MIMO Receive Sensitivity (11ac,40MHz) @10% PER SISO Receive Sensitivity (11ac,80MHz) @10% PER MIMO Receive Sensitivity (11ac,80MHz) @10% PER Maximum Input Level Antenna Reference - MCS=1, NSS1 PER @ -81 dBm, +/- 2dB - MCS=2, NSS1 PER @ -79 dBm, +/- 2dB - MCS=3, NSS1 PER @ -76 dBm, +/- 2dB - MCS=4, NSS1 PER @ -73 dBm, +/- 2dB - MCS=5, NSS1 PER @ -68 dBm, +/- 2dB - MCS=6, NSS1 PER @ -67 dBm, +/- 2dB - MCS=7, NSS1 PER @ -66 dBm, +/- 2dB - MCS=8, NSS1 PER @ -61 dBm, +/- 2dB - MCS=9, N
5.5GHz~5.7GHz 104 108 112 116 120 124 128 132 136 140 5.725GHz~5.845GHz 153 157 161 165 100 5520 5540 5560 5580 5600 5620 5640 5660 5680 5700 149 5765 5785 5805 5825 5500 5745 Bluetooth Specification Conditions : VBAT=3.3V ; VDDIO=3.3V ; Temp:25°C General Specification Feature Description Bluetooth Standard Bluetooth V4.2 of 1, 2 and 3 Mbps.
Pin Outline Pin Definition NO Name Type Description 1 GND － Ground connections 2 WL/BT_ANT0 I/O RF I/O port0 3 GND － Ground connections 4 GND － Ground connections 5 GND － Ground connections 6 GND － Ground connections 7 GND － Ground connections 8 GND － Ground connections 9 WL_ANT1 I/O RF I/O port1 10 GND － Ground connections 11 GND － Ground connections 12 NC － No connect 13 14 15 16 17 18 19 20 XTAL_OUT XTAL_IN WL_REG_ON WL_HOST_WAKE SDIO_DATA_CMD SDIO_DA
21 22 SDIO_DATA_0 SDIO_DATA_1 I/O I/O SDIO data line 0 SDIO data line 1 23 GND － Ground connections 24 NC － No connect 25 26 27 28 29 30 31 VIN_LDO VIN_LDO_OUT PCM_SYNC PCM_IN PCM_OUT PCM_CLK LPO P P I/O I O I/O I Internal Buck voltage generation pin Internal Buck voltage generation pin PCM sync signal PCM data input PCM Data output PCM clock External Low Power Clock input (32.
Package MSL Level / Storage Condition
Description of Operation AP6356S is a 2X2 MIMO 802.11a/b/g/n/ac & BT 2.1+EDR、4.2 combo module from Broadcom Corporation. This module is targeted to mobile device including, Digital Still Cameras (DSCs), Portable Media Players (PMPs), and Gaming Devices, handheld wireless system, mobile phones which need small footprint package, low power consumption. BCM4356’s part is Bluetooth 2.1+EDR、4.2 LE compliant.
2400 ~ 2483.5 MHz ISM band. The channel bandwidth of 802.11n is 20MHz in 2.4GHz and supports channel bandwidth of 802.11n/ac are 20MHz/40MHz/80MHz in 5GHz Band1 & Band4. The supporting data rates cover from 1Mbps to 433 Mbps in 802.11a/b/g/n/ac mode and will switch automatically. The modulation type is DBPSK/DQPSK/CCK in 802.11b and BPSK/QPSK/16-QAM/64-QAM/256-QAM in 802.11a/g/n/ac mode. Both of WLAN and Bluetooth in AP6356S use the same RF trace and share the same “客戶使用” antenna, which operates in 2.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. Note: The manufacturer is not responsible for any radio or TV interference caused by unauthorized modifications to this equipment. Such modifications could void the user’s authority to operate the equipment. FCC RF Radiation Exposure Statement: This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment.
This equipment complies with IC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Déclaration d'exposition aux radiations: Cet équipement est conforme aux limites d'exposition aux rayonnements IC établies pour un environnement non contrôlé. Cet équipement doit être installé et utilisé avec un minimum de 20 cm de distance entre la source de rayonnement et votre corps.
