AP5660W User Manual Page: 1
Table of Content 1. Getting to know your AP5660W ..................................................... 3 2. Installation ...................................................................................... 4 2.1. Login web page .............................................................................. 4 2.2. Change your WiFi Setting and Setup with Mesh ........................ 5 [CAP] refers to your AP5660W(CAP mode). ................................................
1.
2. Installation 2.1. Login web page 1. Plug in adapter power 2. Connect the PC Ethernet cable to LAN port. 3. Launch your web browser and enter the AP5660W’s default address: 192.168.1.1 4. Enter the default username(admin) and password(admin) to log in to your device’s management page. 5. On the management page, you can see “Dashboard, Network, System Settings” And the Dashboard items are followed by the tab you selected.
2.2. Change your WiFi Setting and Setup with Mesh 1. Login the AP5660W Web GUI, then select “Mesh” on Network list. 2. On “BASIC” tab, you can see AP Mode default is “RE”, change Mode to “CAP”, and enter your “WiFi Network Name”, “WiFi Password”, “Security Setting”. Or remain default. Then click “Save”.
3. Connect AP5660W to Router LAN port by Ethernet. And wait LED from “Blue blinking” to “Blue solid”. 4. Power on other AP5660W(default is RE) and wait LED to “Green solid”. 5. Press AP5660W(CAP) WPS button.(Green and Blue LED alternate blinking). 6. Press AP5660W(RE) WPS button.(Green and Blue LED alternate blinking). 7. When AP5660W(RE) LED is Blue solid, AP5660W(RE) is registered and all is well. 8. On the AP5660W(CAP) Web GUI, you can see the devices connected to your Mesh Network.
3. Web GUI 3.1. Dashboard 1. “Network Status” will show Smile Face when AP5660W stands for connecting the Internet successfully. 2. “Mesh Network” is shortcut for MESH management page.
3. “System Information” includes “System Information”, “LAN Information”, IPv6 Information”, “Wireless Information”.
4. “System Settings” is shortcut for System Settings page 5. “Connected Devices” will show Devices Information which device in the LAN Network.
3.2. Network AP5660W support CAP mode (Controller AP) and RE mode (Range Extender), when AP5660W was CAP mode, the Mesh Page will include extra functions, “WiFi Setting” and “Topology”.
3.3. System Settings 1. “Password & Timeszone” includes “System Password”, “Time Zone”, “Web Auto Logout”, “NTP Server” settings. 2.
3. “Configuration & Reset” 4.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
