8822CS user manual 產品中文名稱: 無線藍牙模組 產品英文名稱: WIFI+BT Combo Module 產品商標: ASKEY 產品型號: 8822CS 額定電壓、電流: DC 3.3V 頻率范围: 2.4~2.483GHz，5.15 GHz ~ 5.850 GHz 信道: Ch1- Ch11,Ch36-48,CH52-64,Ch100-140,Ch149-165 天线类型: PIFA ANTENNA 產品硬件版本: V2.0 產品軟件版本: V5.9 Features Highly integrated wireless local area network(WLAN) system-on-chip (SOC) for 5 GHZ 802.11ac, or 2.4G/5G 802.11n WLAN applications. Dual-stream spatial multiplexing up to 867 Mbps data rate. Supports 20/40MHz at 2.
- HCI UART (up to 4 Mbps) - PCM for audio data Module have 2 antenna port, BT port combine with WLAN1. Wi-Fi RF Specification 2.4GHz RF Specification Frequency Range: 802.11b/g/n-HT20: 2412 ~ 2462MHz 802.11n-HT40: 2422 ~ 2452MHz Channel Number: 802.11b/g/n-HT20: 11 802.11n-HT40: 7 Type of Modulation: 802.11b: DSSS 802.11g/n: OFDM Data Rate: 802.11b: 1/2/5.5/11Mbps 802.11g: 6/9/12/18/24/36/48/54Mbps 802.
5GHz RF Specification Frequency Range: For 802.11a/n-HT20/ac-VHT20: 5180~5240MHz, 5260~5320MHz, 5500~5720MHz, 5745~5825MHz For 802.11n-HT40/ac-VHT40: 5190~5230MHz, 5270~5310MHz, 5510~5710MHz, 5755~5795MHz For 802.11ac-VHT80: 5210MHz, 5290MHz, 5530MHz, 5610MHz, 5690MHz, 5775MHz Type of Modulation: 802.11a/n/ac: OFDM Data Rate 802.11a: 6/9/12/18/24/36/48/54Mbps 802.11n: up to 300Mbps 802.11ac: up to 866.6Mbps Note: The frequencies that fall in the 5600MHz to 5650MHz band will not be used in Canada.
Dimensions Marking Description Label The Key Material List
Recommended Reflow Profile Package Information 、
Moisture sensitivity The Modules is a Moisture Sensitive Device level 3, in according with standard IPC/JEDEC J-STD-020, take care all the relatives requirements for using this kind of components. Moreover, the customer has to take care of the following conditions: a) Calculated shelf life in sealed bag: 12 months at <40°C and <90% relative humidity (RH). b) Environmental condition during the production: 30°C / 60% RH according to IPC/JEDEC J-STD-033A paragraph 5.
This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. This device and its antenna must not be co-located or operating in conjunction with any other antenna or transmitter. The antennas used for this transmitter must be installed to provide a separation distance of at least 20 cm from all persons and must not be co-located or operating in conjunction with any other antenna or transmitter.
OEM Integration Instructions： This device is intended only for OEM integrators under the following conditions： The module can be used to installation in another host. The antenna must be installed such that 20 cm is maintained between the antenna and users, and the transmitter module may not be co-located with any other transmit or antenna. The module shall be only used with the integral antenna(s) that has been originally tested and certified with this module.
IMPORTANT NOTE： This Wireless Module (IC: 1353A-8822CS) has been approved by Industry Canada to operate with the antenna types listed below with the maximum permissible gain indicated. Antenna types not included in this list, having a gain greater than the maximum gain indicated for that type, are strictly prohibited for use with this device.
