Quick Installation Guide EAI2001S Enterprise Access Point
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Copyright Notice This document is protected by USA copyright laws and other laws. Besides, the document is the property of Askey, INC. You may not copy, reproduce, distribute, publish, display, perform, or modify any part of this publication in any form or by any means without prior written permission from Askey, INC. You may not alter or remove any copyright or other notice from copies of the content.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH FCC CAUTION This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH CE CAUTION Declaration of Conformity with Regard to the 1999/5/EC (R&TTE Directive) for European Community, Switzerland, Norway, Iceland, and Liechtenstein Model: EAI2001S For 2.4 GHz radios, the device has been tested and passed the requirements of the following standards, and hence fulfills the EMC and safety requirements of R&TTE Directive within the CE marking requirement. • Radio: EN 300.328: • EMC: EN 301.489-1, EN 301.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Preface Package Contents Askey EAI2001S is a high-end, dual radio 802.11 b/g/n + ac MIMO Access Point (AP) with the best performance for business and industrial applications and is compliant with the latest industrial wireless 1. Askey EAI2001S x 1 2. Quick Installation Guide (QIG) x 1 3. Mounting Kit x 1 4. Power Adaptor (12V/1A) x 1 (Optional) security standards that are required in the tightly secured enterprise network environments.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH System Overview EAI2001S’s Front Panel EAI2001S’s Rear Panel 1 RUN/ALARM_LED An LED indicator to show the system status 2 LAN_LED An LED indicator to show the LAN status 3 2.4G_LED An LED indicator to show the 2.4G status 4 5G_LED An LED indicator to show the 5G status 5 Reset Press once to restart the system; to reset the system to factory default settings, hold for more than 5 seconds.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Hardware Installation Please follow the steps mentioned below to install the hardware of EAI2001S: 1. Place the EAI2001S at the best location. The best location for EAI2001S is usually at the center of your intended wireless network. Bracket assembly installation: Step1: (1) Place Mount in Bracket. (2) Mount & Bracket with Screw & Nut. Step2: (1) First drill two holes in the wall or ceiling, and then screw on the wall or ceiling.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Device assembly installation: Step1: (1) Put the device into the Bracket component. (2) Device clockwise rotation of the fixing tenon. Device disassemble: Step1: Press Bracket as shown in the figure to remove the latch Step2: Device counter-clockwise to remove. 2. Connect the EAI2001S to your network device. Connect one end of the Ethernet cable to the Uplink port of EAI2001S and the other end of the cable to a switch, a router, or a hub.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH 3. Connect the DC power adapter to the EAI2001S power socket. EAI2001S Uplink port is capable of receiving DC currents. Connect an IEEE 802.3at-compliant PSE device (e.g. a PoE-switch) to the Uplink port of EAI2001S with the Ethernet cable. Now, the Hardware Installation is complete. • Using a different power adapter may damage this system.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Getting Started Askey EAI2001S supports web-based configuration. When hardware installation is complete, EAI2001S can be configured through a PC by using a web browser such as Mozilla Firefox 2.0 or Internet Explorer version 6.0 and above. The default values of LAN IP address and subnet mask of EAI2001S are: IP Address: 192.168.1.1 Subnet Mask: 255.255.255.0 Steps: 1.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH 4. After a successful login to EAI2001S, a System Overview page of the Web Management Interface will appear, as depicted below. The Web Management Interface - System Overview Page 5. To logout, simply click on the Logout button at the upper right hand corner of the interface to return to the Administrator Login Page. Click OK to logout. Copyright © Askey, INC. All rights reserved.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Common Settings Step 1. Change Administrator’s Password Change Password Page Click on the Utilities icon on the main menu, and select the Change Password tab. Enter a new password with a length of up to 32 characters, and retype it in the Re-enter New Password field. Click SAVE to save the changes. Copyright © Askey, INC. All rights reserved.
Step 2. Configure General AP (Access Point) Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Settings Wireless General Settings Page Click on the Wireless icon on the main menu, and then select the General tab. Determine the Band, Protocol and Channel settings: Select your preferred Band, Protocol and Channel for you wireless connection. For example, select 2.4GHz for the band, 802.11g+802.11n for the protocol and 6 for the channel.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Step 3. Configure VAP (Virtual Access Point) Profile Settings VAP Configuration Page (VAP-1 shown) EAI2001S supports up to 16 virtual APs (VAPs) per RF Card. Configure VAP profile settings： (a) Select the VAP Configuration tab to configure the settings of the desired VAP. (b) Enable a specific VAP from the drop-down menu of Profile Name and configure related settings below. Copyright © Askey, INC. All rights reserved.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Check VAP status： After finishing VAP configuration, the status of enabled Virtual APs shall be reflected on the VAP Overview page. Virtual AP Overview Page Copyright © Askey, INC. All rights reserved.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Step 4. Configure WDS (Wireless Distribution System) Settings (Optional) To extend the wireless coverage, EAI2001S supports up to 8 WDS links for connecting wirelessly to other WDS-capable APs (peer APs). By default, all WDS profiles are disabled. Click on the Wireless button on the main menu. Select the Repeater Settings tab. Choose WDS as the Repeater Type. Choose the desired WDS profile: (a) Enable WDS.
Quick Installation Guide EAI2001S Enterprise Access Point ENGLISH Congratulations! Now, Askey EAI2001S is installed and configured successfully. After EAI2001S's network configuration is completed, please remember to change the IP Address of your PC Connection Properties back to its original settings in order to ensure that your PC functions properly in its real network environments. It is strongly recommended to make a backup copy of your configuration settings.
