AP5620W-RoHS WIFI Tri-band Mesh RE User Guide ver.1.3a 8024-00175P Manufactory : ASKEY Computer corp.
Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
FCC ID : H8NAP5620W This device complies with Part 15 of the FCC Rules. Operations is subject to the following two conditions: (1) (2) This device may not cause harmful interference, and This device must accept any interference received, including interference that may cause undesired operation.
Content Product Features Product Specifications Connection Diagram Setup WIFI Tri-band Mesh RE Package Contents
Product Features Product Features: 1) 2) 3) 4) 5) 6) 7) 8) CPU Quad-core ARM Cortex-A7 Tri-Band Performance–up to 3Gbps (400Mbps(256QAM) + 867 Mbps +1.733Gbps) Support Beamforming for more reliable connections Support wireless 802.
Product Specifications NAND FLASH 128MB / DDR3 SDRAM 256MB Wireless Frequency : 2.4 GHz: 2.400 GHz ~ 2.4835 GHz 5GHz(Low Band) : 5.15GHz ~ 5.25GHz 5GHz(High Band) : 5.725GHz ~ 5.850GHz Operating Temperature: 0 ~ 40 degree C Dimension: W 70 x H 41.5 x D 105 mm Operating Voltage: AC100-240V~ 50-60Hz Maximum Operating Range: Up to 20 m* *Wireless performance may vary depending on the WIFI environment. (A) WPS Button WPS button for pairing . (B) Ethernet port connected with Router.
Connection Diagram Connection Diagram Router Ethernet cable WPS pairing** WIFI device Cell phone Note Book Tablet **only support RT4230 for WPS pairing
Setup WIFI Tri-band Mesh RE 1) Configure your 11ac router to Internet 2) Plug the WIFI Mesh RE into an electric wall outlet. Wait the Red LED to illuminate for 5sec. 3) Press the WPS on the WIFI Mesh RE, then press the WPS on the router for pairing 4) Wait for the WIFI Mesh RE’s LED to turn blue. This indicates the Mesh Range Extender is working.
Package list Contents: 1. WIFI Tri-band Mesh RE *1pcs 2. Ethernet Cable *1pcs 3.