EVDO Fixed Wireless Phone AWP-AE80i User Manual FCC ID: XYOAWPAE80I Copyright © Asiatelco Technologies Co. All rights reserved.
Index EVDO FIXED WIRELESS PHONE ................................................................................................................... 1 AWP-AE80I USER MANUAL ............................................................................................................................ 1 INDEX ................................................................................................................................................................... 2 1 GENERAL INTRODUCTION .................
9.3 OUTGOING CALLS ................................................................................................................................ 12 9.4 CALL TIME ........................................................................................................................................... 12 9.5 DELETE CALL LOGS ............................................................................................................................. 12 10 SETTINGS ..........................................
1 General Introduction Congratulations on your purchase of AWP-AE80i EVDO Fixed Wireless Phone. The User Manual contains important information on the proper use and correct operation of AWPAE80i FWP. We recommend that you read this manual carefully to ensure optimal performance. 128×64 LCD with backlight, easy to read Status Indicators.
2 Product Overview 2.1 Packing List Once you open the product package, please check the packing list to make sure there is no part missing. If any part is missing or broken, please contact the customer service. The packing list is as follow: No. 1 2 3 4 5 6 7 8 Name Phone Body Handset Handset cord Phone bracket AC-adaptor Antenna Li-ion Rechargeable Battery User Manual Qty. 1 1 1 1 1 1 1 1 Remark Table 1 Packing List 2.2 Product Introduction 2.2.
2.2.
17 * In idle screen, press to enter *, +, P, T. In message editing screen, press to enter the special symbol mode. 18 # In idle screen, press to enter # In message editing screen, press * key to select special symbols. 19 Speaker Key Make hand-free operation(speaker icon) Table 2 Key definitions 2.2.3 Display Icon The following icon may appear on the display of the phone: No. Icon Description Current 1X signal strength. The more bars there are, the stronger the signal is.
3 Assemble Phone 3.1 Connectors on the Phone 3.
3.3 Assemble Antenna 4 Basic Operations 4.1 Power On/Off Hook up handset to your phone and put the handset to hang up position, then connect DC power supply to the “DC IN” port at the rear of the phone or insert the battery to the battery chamber. Then long press End Key to turn on the phone, your phone should go to idle screen and is ready to use. You can turn the phone off with long pressing the End Key. Note: Be sure to insert the battery before using the phone 4.
4.6 Conference call If you wish to have more than one called party listen in to the call, you can make a conference call. When you dialed to the first party, and want to make the second call, you can directly dial the second number in the call interface (this time the first call is under hold), then you can press Send key to connect the three people together. 4.
5 Main Menu Press LEFT SOFT KEY to enter the main menu from the idle screen. The main menu includes: Contacts, Message, Call Logs, Settings and Tools.
1) Select Menu → Contacts → View All 2) Press the “up” key and the “down” key scroll the cursor to view the contacts list. you could scroll to the desired name ,press OK KEY, scroll to View the contact information; 7.2 Add New Contact Add a New Contact from the Menu 1) In idle mode select Menu → Contacts →Add New Contact 2) You can edit Phone Number in this menu.
8.1 Create You can send a message to one recipient or multiple recipients. 1) In Messages, press Create and OK KEY to compose a new message. 2) Input the text, press OK KEY to finish inputting the text. 3) There are 8 options in this menu ： Input Number: You can choose Input Number and enter the number you want, send to one recipient without saving, Contacts: You can choose the number which save in the phone.
8.6.2 Deferred Delivery Time 1) Select Menu → Message→ Settings→ Deferred Delivery Time 2) There are eight options in this menu: immediate, 30minutes, 1hour, 2hours, 12hours, 1day, 2days, 3days. Press UP or DOWN KEY, scroll to the item you desired, then press OK KEY to save your setting. 8.6.3 Delivery Setting 1) 2) 3) 4) Select Menu → Message→ Settings→ Delivery Setting There are two options in this menu: Discard, Store. Discard: when you sent a message, it will not store it in outbox.
9 Call Logs In idle screen, press LEFT KEY and scroll the cursor to the Call logs then press OK KEY to confirm entered the Call Logs. After entering the call log function you can find Missed calls, Incoming Calls, Outgoing Calls, Call Time and Delete Call logs menu. 9.1 1) 2) 3) 9.
10.1.3 DTMF Length In Sound menu, select DTMF Length, then you can set the DTMF Length via UP or DOWN Key, press OK KEY to save the setting. You can set the status as Long, Short. 10.1.4 Service Alert You can turn on/off the service alert through this menu. 10.1.5 Missed Call Alert You can turn on/off the Missed Call Alert through this menu. 10.2 Display Here you can select the display options to set the screen display in idle screen, include the Back light, Banner, Auto hyphen, Contrast. 10.2.
1) Press Left or OK Key to enter the submenu. 2) There are three lock modes: Never, On Power up, Outgoing call. 10.3.3.2 Lock Code Change 1) Press Left or OK Key to enter the submenu. 2) There are two lock modes: On, Off. 3) Old lock code must be allowed if you want to update lock code. When old code is correct, then you should enter same Lock Code twice to change Lock Code. 10.3.4 Network Information 1) Menu →Settings →Security→ Network Information 2) You can check network information in this menu.
10.5.2 HW Version 1) Select Menu →Settings→ Phone Info→ HW Version 2) You can view the Hardware version. 10.5.3 PRL Version 1) Select Menu →Settings→ Phone Info→ PRL Version 2) You can view PRL version 10.5.4 MEID/ESN 1) Check MEID or ESN of your device. 10.6 Network 10.6.1 Mode Preference 1) Select Menu →Settings→ Network→ Mode Preference 2) Press OK KEY to select Mode Preference, there are 3 options in the menu: Hybrid mode, Photon Plus and Photon Whiz, Press OK KEY to save your settings. 10.
12 Dialer 12.1 Connect phone with PC Connect the data terminal with PC/laptop by using the accompanying data cable. Connect Interface 1 with Data Terminal, and interface 2 with PC’s USB port. Plug AE80i to the USB interface of the PC (as shown below for Laptops and Desktops) Figure 5 connect the phone with PC 12.2 Installing the Dialer 1. Connect device to the PC 2. Your PC automatically detects and recognizes new hardware and starts the installation driver and dialer. 3.
4. Press to modify or add new user. Note: Default Profile should be Number - #777 User Name Password - 12.4.2 Connecting to the internet Click < connect>button to connect to the internet. 12.5 Click button enter to edit contact list. If you want save contacts in Data card please select , select will save in UIM card if you have insert UIM card. 1). Add new contacts please press , input name and numbers then press save.
2). Select a contact name, you can press to modify name and number. 3). Select a contact name, press , it will show below message to confirm with you again.
4). Select a contact name, press will show below picture, you can edit message on black and press to send the massage or press to just save it or press to cancel it. 5) Press ,you can search the name which you want from contacts lists.
12.6 Click button enter . 1). Press button to create a new message. You can input a number on bar. You also can press to select number from contact.
Press to show contacts list, select a contact and press to add the number then press . Edit the message on black then press button to send out the message. 2). Select one message in inbox, you can see as below picture. Press to reply the message, press to forward the message to others.
3). Press will delete message you select, but it will ask below question before delete. 4). Press you can select store message in computer, Data card or UIM card. Press to save your selection. 12.7 Click button to check connect history. You can press to delete the connect history one by one, also can press to delete all history.
12.8 1). Press , press to add or modify the Profile name /Access name /User name /Password. Press it. 2). Press , you can select data mode: 1x / EVDO /Hybrid, then press to save the setting.
3). Press , you can select “Support CHAP” or “Support PAP”, then press to save it. 4). Press ,you can set the PIN, choose the “Enabled” or ”Disabled”, then input the right PIN Code, you can enable or disable the PIN code function [Note] PIN function will appear when you insert UIM card.
5). Press , you can see the detail information: DataCard Connect Version, ESN, MIN, PRL Version, Firmware Version, Hardware Version. 12.9 How to receive a message When receive a new message, you will see below, it display message’s content and receive time.
Also can press enter to Inbox, you will find the new unread message on inbox, Select the message, unread will change to read and you will see the detail information about this message 26
12.10 Uninstall Dialer Close DataCard Connect, Start->Programs-> DataCard Connect, Click uninstall, and the software will be uninstalled. You can also uninstall DataCard Connect as following: Control PanelAdd or Remove Programs, find DataCard Connect, and click remove to uninstall the program.
13 Important Information The product can only be installed indoors. Do not place the phone near high temperature objects, under direct sunlight, near source of water, near fire or near inflammable and explosive materials. Avoid using the phone in high temperature or humidity. The phone may interfere with heart pacemaker, hearing aid and other electronic medical devices. Therefore please follow the instructions given by your equipment suppliers or consult your doctor.
4. FCC Regulations: This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules.
