AWUN2462D Wireless LAN USB Adapter QUICK START GUIDE VERSION 1.
Step 2 : Click Next to continue. Step 3 : Choose accept and click Next to continue. Step 4 : Choose the installation type. To install the client utilities and driver, select the appropriate button and click Next.
Step 5 : Insert WLAN USB adapter into USB port and click OK to continue. Step 6 : Click Next to install at the designated folder. Or, click “Browse” to select different folder. Step 7 : Click Next to continue.
Step 8 : If you have multiple computers to access, choose SSO(Single sign on) feature set. Or you can choose “Do not install SSO feature set” and Click Next to continue. Step 9 : Start copying files until it finishes the installation. Step 10 : Click Finish to complete installation.
3.1 The installation driver CD will automatically activate the autorun installation program after you insert the disk into your CD drive. Please refer to page 1 “INSTALL DRIVER/UTILITY” 3.2 Install Manually : Plug your USB dongle into USB interface, windows Vista will search for compatible driver to install. Step 1 : Select “Locate and install the driver software”, Windows will guide you through the process of installing driver software for your device.
Step 3 : Windows Vista search for the software and it will be installed successfully. Step 4 : After installation, right click the network icon on the Windows Vista System Tray, and click “Connect to a network”. Step 5 : Select a network to connect to and click “Connect”.
Step 6 : Click “Connect Anyway” if the network is an unsecured network.
FCC RF Radiation Exposure Statement: 1. This Transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. 2. This equipment complies with FCC RF radiation exposure limits set forth for an uncontrolled environment. The Maximum Output power is 13.47dBm(22.25mW).
