Audio-Mate Stereo Headset With Transmitter User Manual 1
Contents • • • Introduction ………………………………………… BOX Package ……………………………………… Getting Started ……………………........................ 3.1 Preparation ……………………………………….. 3.2 Pairing Headset & Audio Transmitter…………… 3.3 How To Use Headset & Audio Transmitter…….. 3.4 Current Support Phone List……………………… 3.5 The Power Source of the Devices………………. 3.5.1 Audio Transmitter Power Source…………… 3.5.2 Bluetooth Headset Power…………………… 4.
1. Introduction Audio-mate Stereo Headset Length Adjustment 3 way switch 1 Answer/END Button (vertical) Volume control (left-right) Push Status LED(RED) 2 - power status - pairing mode - connected mode 3 Power switch Battery Compartment cover Transmitter Blue LED Discovery: Fast flash Paired : slow flash Red LED Low battery indicator Green LED : Charging indicator Power Switch / Pairing Button Rechargeable batteries with USB connector Hi-Fi Audio in jack 3.
2. Package • • • • • Audio-Mate stereo Headset *1 Audio Transmitter *1 USB Charger Cable *1 5V Adapter*1 Manual *1 a. Stereo Headset *1 b. Audio Transmitter * 1 Manual Manual Manual Manual c. USB Charger cable *1 d. 5V Adapter *1 e. Manual *1 Safety information 1. Don’t use the headset phone and transmitter inside hospitals , airplanes or in the vicinity of other emergency systems. 2. Keep away from the strong radio system, to ensure the single quality 3.
3. Getting Started 3.1 Preparation -Audio-Mate Headset 1. Open the battery compartment cover. 2. Insert 2X AA batteries into battery compartment. Make sure the plus and minus poles of battery was correctly touched their contacts. 3. Close the battery compartment cover with a click. 1 2 3 4 5 6 - Transmitter • Plug AC Adapter into the DC jack of the Transmitter • Plug the AC Adapter’s plug into the outlet. • The LED indication is Green when charging the Transmitter.
3.2 Pairing Audio-Mate Headset & Bluetooth Audio Transmitter 1. Turning on the Audio-Mate Headset Power-On Switch, the Power-On LED will start rapid flashing that is into standby mode for paring. 2. To start Audio Transmitter by pushing down (about 3s) the Audio Transmitter Power-On Button continuously until LED1 flashing (Blue) ; Transmitter is into the paring mode . 3. which is about 5-10 seconds to complete the paring process. 4. To complete the paring process; always check below: a.
3.3 How To Use Bluetooth Headset & Bluetooth Audio Transmitter 1. To Enable the Bluetooth Function with Your Entertainment Device a. After paired the Bluetooth Headset and the Audio Transmitter; simply connect the Audio Transmitter to the Entertainment Device via the standard Audio Jack of the Audio Transmitter. b. To use Home Entertainment Devices that do not provide Audio In interface: to shop an Audio Jack to standard RCA cable and then connect it to the Device to enable its Bluetooth function. 2.
3.5 The Power Source of the Devices 3.5.1 Audio Transmitter Power Source Audio Transmitter contents an internal rechargeable battery. When battery low, the Battery LED Indication light will be on and when the battery full, the LED will get to snuff. To fit versatile purposes of using it indoor or on the go; it provides 2 different power charging methods that listed as below: a.
4.
