User's Manual

Technical specifications are listed on the following page
DRAFT
21 June 2017 / Ver. DRAFT TD xxxxxEN
Wireless Universal Transceiver Module
Features
• Wireless Universal Transceiver Module (NUUTX)
• wireless interface point for alarm contacts and all
sorts of contact operated sensors and detectors
• Battery powered with automatic low battery
warning
• Two independent inputs supporting:
- Normally open contacts (with line monitoring)
- Normally closed contacts
- Flashing contacts from 1 Hz
- A DC voltage from 10 VDC to 30 VDC
• Window / door open state detection using an
onboard bi-polar magnetic sensor
• Wireless transceiver, with heartbeat
• 869 MHz (EU) or 916 - 921 MHz (US) band
• Including wall mounting bracket
Description
The universal transceiver module (NUUTX) is a wall
mounted teleCARE IP wireless peripheral containing an
869 MHz (EU) or 916 - 921 MHz (US) RF transceiver
which can be mounted on walls, door or window posts.
The NUUTX has two independent inputs that can be
used to interface external alerts coming from a wide
variety of detectors. It features a bi-polar magnetic
sensor which in combination with a magnet can be
used to detect the open or closed state of doors and
windows.
The NUUTX comes in a white plastic body with a
mounting bracket and installation kit for surface
mounting and is suitable for use in elderly care homes,
nursing homes and hospitals.
The NUUTX requires 2 x 1.5V / AA disposable batteries
(not included). An automatic low battery warning is
transmitted if the battery voltage falls below 2.4V.
Each NUUTX has a unique identity (ID) and this ID is
transmitted with every event.