User's Manual

Technical specifications are listed on the following page
DRAFT
21 June 2017 / Ver. DRAFT TD xxxxxEN
Wireless Infrared Transceiver Module
Features
• Wireless Infrared Transceiver Module (NUWIR)
• Passive Infra-Red sensor
• Maximum 6 meters / 20 feet detection range
• 90 degrees detection beam
• Horizontal or vertical mount
• Battery powered with automatic low battery
warning
• Wireless transceiver, with heartbeat
• 869MHz (EU) or 916-921MHz (US) band
• Including wall mounting bracket
Description
The wireless infrared transceiver module (NUWIR) is a
wall mounted teleCARE IP wireless peripheral
containing an 869 MHz (EU) or 916 - 921 MHz (US) RF
transceiver.
The NUWIR contains a passive infrared sensor with a 90
degrees detection beam covering a maximum distance
of 6 meters / 20 feet.
Based on the software configuration the NUWIR can be
used to indicate that a resident is in the toilet in order
to alert the caregivers after a preset amount of time.
The NUWIR can also be used as an automatic resident
check-in trigger, simply allowing the resident to check-
in by motion detection when the resident is up and
about.
The NUWIR comes in a white plastic body with a
mounting bracket and installation kit for surface
mounting and is suitable for use in elderly care homes,
nursing homes and hospitals.
The NUWIR requires 2 x 1.5V / AA disposable batteries
(not included). An automatic low battery warning is
transmitted if the battery voltage falls below 2.4V.
Each NUWIR has a unique identity (ID) and this ID is
transmitted with every event.