User's Manual

Technical specifications are listed on the following page
DRAFT
21 June 2017 / Ver. DRAFT TD xxxxxEN
Wireless Bedside Module
Features
• Wireless Bedside Module (NUWBM3) with
teleCARE functionality
• Three buttons with configurable colors including
three white LEDs with matching lens colors
• SafeConnect socket for bedside handset with
disconnect alarm, including a green LED for
handset connect status.
• Supports 1-button non-medical handset
• Battery powered with automatic low battery
warning
• External 5 VDC power (optional)
• 869 MHz (EU) or 916 - 921 MHz (US) band
•
Description
The wireless bedside module (NUWBM3) is a wall
mounted teleCARE IP wireless peripheral containing an
869 MHz (EU) or 916 - 921 MHz (US) RF transceiver. It
has 3 customizable function buttons and a magnetic
SafeConnect socket with LEDs in a white plastic body.
It comes with a spacer and installation kit for surface
mounting.
The wireless bedside module is suitable for use in elderly
care homes, nursing homes and hospitals.
The wireless bedside module requires 2 x 1.5V / AA
disposable batteries (not included). An automatic low
battery warning is transmitted if the battery voltage falls
below 2.4V.
Alternatively, a 5 VDC power supply (item number xxx)
can be used.
When battery powered the LEDs stay active for a period
of 20 seconds after a call has been made. When
externally powered the LEDs stay active until the call has
been cancelled.
Each wireless bedside module has a unique identity (ID)
and this ID is transmitted with every event.
The wireless bedside module includes a SafeConnect
socket with connect status LED for the connection of
the NUHS1B (one-button) handset. When the bedside
handset is disconnected, a disconnect alarm is
generated to inform the staff.
Note: 3, 7 and 14 button handsets are not
supported.
If the 5 VDC power supply is used, the LEDs will
permanently emit a low intensity light for locating and
identification in the dark.