TD 92476GB PRELIMINARY User Manual Cordless Telephone DT390 2008-06-12/ Ver.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY Contents 1 Introduction............................................................................................................. 1 1.1 Abbreviations and Glossary ................................................................................ 1 1.2 Functions and Accessories .................................................................................. 1 2 Safety Instructions ..............................................................
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 5.2 Lock/Unlock the keypad ................................................................................... 18 5.3 Lock/Unlock the Handset ................................................................................. 18 6 Calling .................................................................................................................... 19 6.1 Open the Call List .....................................................................
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 7.2.1 Call contact ............................................................................................. 26 7.2.2 Add contact ............................................................................................. 26 7.2.3 Edit contact ............................................................................................. 27 7.2.4 Delete Contact .................................................................................
User Manual Cordless Telephone DT390 1 TD 92476GB PRELIMINARY Introduction This document describes features and settings available for the Cordless Telephone DT390. The cordless telephone is designed to be used in office environment and has high quality voice. Read the 2 Safety Instructions on page 2 before using the DT390 handset. 1.1 1.2 Abbreviations and Glossary PDM: Portable Device Manager: A management tool for devices where to download software, set up parameters, templates etc.
User Manual Cordless Telephone DT390 2 Safety Instructions TD 92476GB PRELIMINARY Read this chapter before using the DT390 handset. For safe and efficient operation of the handset, observe the guidelines given in this manual and all necessary safety precautions when using the handset. Follow the operating instructions and adhere to all warnings and safety precautions located on the product, the Quick Reference Guide and this User Manual.
User Manual Cordless Telephone DT390 2.1.1 TD 92476GB PRELIMINARY Frequency Range The handset is a radio transmitter and receiver. When it is on, it receives and sends out radio frequency (RF) energy. The handset operates on different frequency ranges depending on market and employs commonly used modulation techniques: EU 1880-1900 MHz USA 1920-1930 MHz LA 1910-1930 MHz 2.1.2 Warranty notification Do not disassemble the handset. Disassembling the handset voids the warranty.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY Privacy of communications may not be ensured when using this handset. Exposure to Radio Frequency Signals This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This device complies with FCC SAR limit of 1.6 W/kg. The maximum SAR value measured when used at the ear is 0.043 W/kg.
User Manual Cordless Telephone DT390 Battery TD 92476GB PRELIMINARY • Do not immerse the battery into water. This could short-circuit and damage the battery. • Do not expose a battery to an open flame. This could cause the battery to explode. • Do not allow the metal contacts on the battery to touch another metal object. This could short-circuit and damage the battery. • Do not leave a battery where it could be subjected to extremely high temperatures, such as inside a car on a hot day.
User Manual Cordless Telephone DT390 3 Descriptions TD 92476GB PRELIMINARY 12 1 13 2 4 3 7 5 6 8 9 11 10 Figure 2. Description of the cordless telephone. 1 Headset connector The headset connector is for connecting a headset. The connector is protected against dust by using the headset connector cover.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 13 3.1 Display The full graphic type display is 112 pixels wide and 115 pixels high. The display is monochrome black and white, with backlighting. The Cordless Telephone DT390 IMPORTANT: The handset may retain small magnetic objects around the mouthcap or earcap region. Case The plastic cover parts are made of durable PC/ABS material. Antenna The antenna is integrated inside the phone.
User Manual Cordless Telephone DT390 PRELIMINARY Chargers 3.2.1 Desktop Charger Advanced Basic 002 3.2 TD 92476GB Figure 3. Desktop chargers. There are two desktop chargers available, one basic charger that will only charge the cordless telephone, and one with advanced functionality to communicate with the system and for software download. The charger is delivered with a plug-in power supply and is connected into an ordinary wall socket.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY The display normally shows date and time, the Owner ID and telephone number. The Owner ID can manually be set by the user. 11:00 Status bar 05/12/2007 Header bar System A Active area 709040 Soft key bar 004 Menu Figure 4. Example of a display configuration in standby mode. The top row (Status bar) is used for icons which give the user information for signal strength, missed call, time and battery status.
User Manual Cordless Telephone DT390 Icons TD 92476GB PRELIMINARY “Signal strength” icon is visible when the cordless telephone is connected to a system. The staples shown in display depends on the signal strength. Full “Battery” icon is displayed in the upper right corner. "Low battery” icon is shown when the battery only has 5% of its capacity left. The icon is flashing when the battery capacity is equal to, or lower, than 5%. “Sound off” icon is shown when the Sound off key is pressed.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY The “Settings” menu contains personal phone settings such as changing the ringer volume, selecting language, etc. * System dependent. 3.4 Keys and Buttons 3.4.1 Off-hook key This key is used for connecting calls. One short press in standby mode opens the call list. 3.4.2 On-hook, and On/Off key This key is used for disconnecting calls and returning to main screen. A long press on the key in standby mode will be switch the telephone on/off.
User Manual Cordless Telephone DT390 3.4.6 Soft Keys TD 92476GB PRELIMINARY 003 Menu Soft keys Figure 5. Soft keys. The three Soft keys are located just beneath the display and the functions of each Soft key is indicated by text in the display just above the keys. 3.5 Alphanumeric Keys abcæàâç2 defèéêë3 , .? ! - ‘ ” 1 jkl5 ghiîï4 mnoñôöœ6 wxyz9 pqrs7 tuvû8 # 006 Space + * 0 Figure 6. Available characters. Note: Depending on the selected menu language, other characters can be available.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY • Swivel clip To be able to rotate without slipping out from the case • No clip To be able to use the telephone without a clip 3.6.2 Security String The security string is 800 mm long. The security string is attached directly to the telephone. 3.6.3 Leather Casing The leather casing is especially designed for the handset. The casing comes with a swivel type belt clip and the handset is fully operational while placed in the casing. 3.6.
User Manual Cordless Telephone DT390 4 PRELIMINARY Menu Tree 4.
User Manual Cordless Telephone DT390 4.
User Manual Cordless Telephone DT390 4.
User Manual Cordless Telephone DT390 4.4 In Call menu TD 92476GB PRELIMINARY The In Call menu can be reached during an ongoing call by pressing the middle Soft Key marked "More".
User Manual Cordless Telephone DT390 5 Basic Operation 5.1 TD 92476GB PRELIMINARY Switch the telephone on/off Press and hold , the telephone will vibrate when it is on and the display lights up. A long press in standby mode will turn the telephone off, a control question will first be displayed to confirm switch On/Off. It also returns to standby mode when pressing the key while in a menu. 5.1.1 Turn the Audible Signal On/Off A long press on the Sound off key on/off. The 5.
User Manual Cordless Telephone DT390 6 PRELIMINARY Calling 6.1 TD 92476GB Open the Call List The 25 last received, dialled or missed calls are stored in a call list. Press the call list. Step with and select one of the numbers. If a number occurs more than once, the last time stamp, together with the total number of occurrences, is shown. Press the soft key "Call" to dial. The call list can also be accessed via the Calls info menu, see 7.1 Calls on page 24. 6.
User Manual Cordless Telephone DT390 6.3.3 PRELIMINARY Dial a Number from the Local Phonebook 1 Open the menu by pressing the confirmation button, or the Soft key "Menu". 2 Select "Contacts". 3 Select "Call contact". 4 Select contact from list, or search name/number by entering characters and select search. 5 Press the Soft key "Call" or the Off-hook key to make the call. 6.3.4 6.
User Manual Cordless Telephone DT390 6.4.5 TD 92476GB PRELIMINARY Switch between Calls A new call is started during conversation, the first call is on hold. Press the soft key "More", and select "Switch"1. Press "Select". This will switch between the calls. 6.4.6 End a Call A new call is started during conversation, the first call is on hold. Press the soft key "More" during the call, and select "End Call"1. Press "Select". This will end the current call and the previous call is resumed. 6.4.
User Manual Cordless Telephone DT390 6.5 TD 92476GB PRELIMINARY Loudspeaking Function How to activate the loudspeaking function is dependent of the choice of answering method. An incoming call can be connected with loudspeaking function active by pressing left Soft key. During a call, a press on the left Soft key activates the loudspeaking function. Press the left Soft key again to turn it off. You can also activate this function by selecting another answering method, see 7.3.6 Answering on page 30.
User Manual Cordless Telephone DT390 6.8.3 TD 92476GB PRELIMINARY Delete Contact Enter “Contacts” in the menu, see 4.2 Contacts menu on page 15, and select “Delete contact". The names in the list are shown in alphabetical order, step with and select Name/Number. To search in the list, enter the first character(s) in the name. The name/ number is displayed, press "Delete", and press "Yes" to delete the contact. 2008-06-12/ Ver.
User Manual Cordless Telephone DT390 7 TD 92476GB PRELIMINARY Menu Operation 13:00 Contacts Calls Settings select Back Figure 7. The main menu. 7.1 Calls 1 Enter the menu by pressing the “Menu” Soft key. 2 Select 7.1.1 in the menu, and press the Soft key "Select". Call list 1 Select Call list, and step with the 2 Select number and press "Call". to scroll in the list. View the time of a call 1 Select number from Call list. 2 Press the Soft key "More". 3 Select "Time of call".
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 2 Press the Soft key "More". 3 Select Delete". 4 Select "Yes" to delete the entry from the list. Delete all entries from the Call list 1 Select number from Call list. 2 Press the Soft key "More". 3 Select "Delete all". 4 Select "Yes" to delete all the entries from the list. 7.1.2 Missed calls 1 Select Missed calls, and step with the 2 Press the Soft key "Call" to call back. to scroll in the list.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 2 Select "Divert calls". 3 Select "Internal/External". 4 Select "Activate". 5 Enter number to divert to. 6 Press "OK" To stop diversion select "Deactivate" and press the Soft key "OK". 7.2 Contacts 1 Enter the menu by pressing the “Menu” Soft key. 2 Select 7.2.1 in the menu, see 4.2 Contacts menu on page 15. Call contact 1 Select "Call contact". 2 Select contact from the list, or enter name or number in the search field.
User Manual Cordless Telephone DT390 7.2.3 Edit contact TD 92476GB PRELIMINARY 1 Select "Edit contact". 2 Select contact, and press "Edit" twice. 3 Enter new name/number, and press "OK". 4 Press "Save". 7.2.4 Delete Contact 1 Select "Delete contact". 2 Select contact, and press "Delete". 3 Press "Yes" to confirm. 7.2.5 Central phonebook In the Central Phone book it is possible to search by name, number, or the last result.
User Manual Cordless Telephone DT390 7.3 TD 92476GB PRELIMINARY Settings 1 Enter the menu by pressing the "Menu" soft key. 2 Select 7.3.1 in the menu, see 4.3 Settings menu on page 16. Sound and Alert Adjust the Ringer Volume 1 Select “Sound & Alerts”. 2 Select “Volume”. 3 Step with 4 Press "OK" to save the setting. to increase/decrease the volume. Set different Ring Signals for Internal Call, External Call and Call Back 1 Select “Sound & Alerts”. 2 Select “Ring signals”.
User Manual Cordless Telephone DT390 7.3.2 Headset TD 92476GB PRELIMINARY Select between: • Mic on boom • Mic on Cable • Customized headset profile1. 1 Select "Headset". 2 Select headset from list. 3 Press "Select". 7.3.3 Display Contrast 1 Select “Display”. 2 Select “Contrast”. Step with 3 Press "OK" to save the setting. 7.3.4 to adjust the contrast. Time & Date Set Time Format 1 Select "Time & Date" and press "Select". 2 Select Time format. The actual time will be displayed.
User Manual Cordless Telephone DT390 7.3.5 TD 92476GB PRELIMINARY Phone Lock settings Activate the Automatic Key lock 1 Select “Locks”. 2 Select "Automatic key lock". 3 Select "On" for activation of automatic key lock. Activate the Phone Lock The phone can be protected for unauthorized use. If this function is activated a PIN code has to be entered at power on, or when the handset is placed in a charger - this behaviour will first be activated when the handset is placed in the charger.
User Manual Cordless Telephone DT390 Answering key TD 92476GB PRELIMINARY The answering behaviour is by default set to Hook-off. It can also be set to Any key by first selecting "Answering key Hook-off", and then "Any key". Press "Back" to save the setting. Answering behaviour 1 Select "Automatically"/ "Loudspeaking". 2 Press "Change" to change the setting. The check box will be marked. 3 Press "Back" to save the setting.To remove the setting, press "Change". The check box will be unmarked. 7.3.
User Manual Cordless Telephone DT390 7.3.10 System TD 92476GB PRELIMINARY Only available systems are displayed. It is possible to switch between the systems if they are configured in the PDM, see Installation and Operational Manual, Portable Device Manager (PDM), Windows version, TD 92325GB and Installation and Operation Manual (CPDM), System version, TD 92473GB. Change System Select “Automatic” or a specific system.
User Manual Cordless Telephone DT390 Priority TD 92476GB PRELIMINARY The default order of priority is the order of entered subscriptions. This means that the first subscribed system has the highest priority. This list can be edited by the user. It is possible to set the systems in priority by moving them up or down in the list. Note: This is used in combination with system set to be "Automatic", see Change System on page 32. 1 Select "Priority".
User Manual Cordless Telephone DT390 8 Advanced Functions 8.1 TD 92476GB PRELIMINARY System Handling The handset supports the GAP (Generic Access Profile) standard. This makes it possible to log on to any GAP compatible system with your phone. 8.2 Admin menu See Configuration Manual, Cordless telephone DT390, TD 92532GB. 9 System Handling 9.
User Manual Cordless Telephone DT390 11 Operation Notice TD 92476GB PRELIMINARY 11.1 Accessibility and Voice Quality The base network is not always available. If you do not get in contact with your system, contact your system administrator. For best voice quality, avoid positioning near computer, radio or similar equipment. Operating Area You can only use your cordless telephone in the area that is covered by your system. Outside this area you will loose contact with the system.
User Manual Cordless Telephone DT390 12 Maintenance TD 92476GB PRELIMINARY 12.1 Charge the Battery Place the telephone in the desktop charger or in the rack charger. The battery is being charged when the LED on the telephone is steady orange. When the battery is fully charged the LED will be green. An animated battery icon is also shown in the display indicating charging by starting with its current charge and ending with the full charge. A filled Battery icon indicates a fully charged battery.
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY 12.3 Attach the Hinge-type Clip Attach the hinge clip as described in the illustration below. Figure 9. Click-on the clip. 12.4 Attach the Swivel-type Clip Attach the swivel clip as described in the illustration below. Figure 2. Figure 10. Click-on the clip. 2008-06-12/ Ver.
User Manual Cordless Telephone DT390 Index TD 92476GB PRELIMINARY A Antenna.......................................................... 7 B Battery ...................................................... 7, 36 low battery ........................................ 10, 36 C C (Clear) button ............................................ 11 Call info .................................................. 10, 14 Call service .................................................... 25 Calling answered call .............
User Manual Cordless Telephone DT390 TD 92476GB PRELIMINARY user identity ............................................... 9 W Writing Text/Numbers pause....................................................... 12 2008-06-12/ Ver.