Owner’s Manual Manual Part No. D1103-Serta-MSI REV: 2013-11-26 Copyright © 2013 . All Rights Reserved Ascion LLC.
Table Of Contents Safety Precautions........................................................................................................................3 Parts List...........................................................................................................................................8 Frame Assembly Instructions...................................................................................................9 Bluetooth Accessory Module User’s Guide....................................
SAFETY PRECAUTIONS WARNING! IMPORTANT SAFETY INSTRUCTIONS. PLEASE READ THESE INSTRUCTIONS THOROUGHLY BEFORE USING THIS PRODUCT. SAVE THESE INSTRUCTIONS! When using an electrical furnishing basic precautions should always be followed, including the following: READ ALL INSTRUCTIONS BEFORE USING (THIS FURNISHING) DANGER: To reduce the risk of electric shock: Always unplug this furnishing from the electrical outlet before cleaning.
SAFETY PRECAUTIONS WARNING: Risk of Injury: Keep children away from extended foot support (or other similar parts). WARNING: Risk of electric shock: Connect this furnishing to a properly grounded outlet only. See Grounding instructions. GROUNDING INSTRUCTIONS: This product must be grounded. If it should malfunction or breakdown, grounding provides a path of least resistance for electric current to reduce the risk of electric shock.
SAFETY PRECAUTIONS This product is for use on a standard 120-volt circuit, and has a grounding plug that looks like the plug illustrated in photo A (see Figure). A temporary adapter that looks like the adapter illustrated in photo B and C able to be used to connect this plug to a 2-pole receptacle as shown in photo B if a properly grounded outlet is not available. The temporary adapter should be used only until a properly grounded outlet (photo A) can be installed by a qualified electrician.
SAFETY PRECAUTIONS IMPORTANT SAFETY FEATURES: Use this furnishing only for its intended use as described in these instructions. Do not use attachments not recommended by the manufacturer. If there is an overload weight condition on the head or foot mechanism, the control unit will automatically stop all functions. Once the excess weight is removed the control unit will automatically allow all functions to resume operation after 30 seconds.
SAFETY PRECAUTIONS SAVE THESE INSTRUCTIONS: Your Motion SIGNATURE Adjustable Foundation has been designed to provide you with the reliable operation and durability you expect. This product has been inspected and tested prior to shipment. RADIO FREQUENCY IS 433.92 MHZ FCC COMPLIANCE This device complies with part 15 of the FCC Rules.
Parts rts List NOTE: Before discarding any packing materials, check the adjustable bed frame carton and verify the following items in the parts list are included: Motion SIGNATURE ADJUSTABLE FOUNDATION A. B. C. D. E. F. G. H. I. J. K. L. M. N. O. PARTS LIST A. Wireless Remote Control (1) and CR2477 3V Lithium battery (1) B. Pro-Fit™ Mattress Retainer System (4) C. Foundation Legs (4) D. Inner Headboard Bracket (2) E. Outer Headboard Bracket (2) F. Retainer Bar Bolt (8) G.
Frame Assembly Instructions IMPORTANT UNPACKING INSTRUCTIONS To avoid damage to the adjustable bed, always open the carton while the bed is laying in the FLAT position on the floor. OPEN FLAT STEP 1 Carefully lift the bed frame unit out of the shipping carton, keeping the unit top side down. For safety reasons, this should be performed by 2 people.
Frame Assembly Instructions STEP 9 STEP 5 Carefully rotate the base frame over to the upside up position. NOTE: Use only a manual screwdriver to install the retainer bolts. DO NOT use a power screwdriver to tighten the bolts. DO NOT over tighten the mattress retainer hardware. ATTENTION ! Improper handling DO NOT Use the Retainer Bolts (F) and Retainer Bar Plate (I) to fasten the Pro-Fit™ Mattress Retainer System (B) to the front of the bed Frame. (As shown in the diagram).
Headboard Installation Install the headboard brackets to the bed base frame. Place one bracket on the left-hand side of the base and one bracket on the right-hand side of the base. 1. Use the remote control to raise the head of the bed in order to gain access to the bed base frame. 2. Remove plastic cap and place the Inner Headboard Bracket (D) into the round tube frame making sure the bracket inserted into the round tube. This will create a box shape.
Bluetooth Accessory Module User’s Guide How to download the App Software Your Motion Signature adjustable foundation has a Bluetooth Accessory Module as standard equipment. STEP 1 Please use your iPod Touch (5th generation), iPhone 4S or iPad 3 to log into the App store. STEP 2 Type “ Serta Remote ” in the search column. STEP 3 Select the Serta Motion Signature app. The Bluetooth Accessory Module allows you to control your adjustable foundation with your mobile device using a free, downloadable app.
Bluetooth Accessory Module User’s Guide A. B. G. H. D. J. C. I. E. K. L. F. M. M. Interface Screen 1 Interface Screen 2 I. Massage stop button: • Press for 2 seconds to stop all massage features. Operating Instructions A, B. Head and Foot adjustment: • Raise and lower head and foot section of base. J. Full body massage function: • Turns on both head and foot massage motors and alternates between Wave mode 1 & 2.
Bluetooth Accessory Module User’s Guide Adjust Night Brightness: Adjust the brightness setting of the nightlight. You will see the nightlight get brighter and dimmer as you move right or left. Customer Support: Please contact us if you have questions or concerns about your adjustable foundation.
Wireless Remote Control LED LIGHT A. ANTI SNORE B. ZERO GRAVITY C. RETURN ALL SECTIONS TO THE FLAT POSITION D. PROGRAM UP TO 2 MEMORY POSITIONS E. RAISE (▲) / LOWER (▼) FOOT SECTION OF THE BASE F. NIGHTLIGHT ON / OFF G. RAISE(▲) / LOWER (▼) HEAD SECTION OF THE BASE H. INCREASE (+) / REDUCE (-) MASSAGE INTENSITY ON FOOT SECTION OF THE BASE I. TURNS ON THE FULL BODY MASSAGE FUNCTION J. INCREASE (+) / REDUCE (-) MASSAGE INTENSITY ON HEAD SECTION OF THE BASE K. SELECT 1 OF 2 MASSAGE WAVE SPEEDS L.
Remote Control Operation Guide HEAD AND FOOT ADJUSTMENT (E, G) • Adjusts the head and foot sections to the desired positions. HEAD AND FOOT MASSAGE CONTROLS (H, J) • Turns on the corresponding massage unit (starting at intensity 5 of 10) BED “FLAT” BUTTON (C) • Levels the bed to the flat position when the button is pressed and held for at least 1 second. • Slowly increases or decreases massage intensity. To increase massage intensity, press (+) button. To decrease massage intensity, press (+) button.
Remote Control Operation Guide Additional Remote Features: Notice: • The Motion SIGNATURE adjustable foundation uses a RF (Radio Frequency) remote control system. The changes or modifications not expressly approved by the party responsible for compliance could void the user’s authority to operate the equipment. NOTE: This bed may have minor intermittent performance due to RF Interference. This is a normal operation of the bed and is not a defect.
Replacement Remote Control Programming STEP 4 Note: The remote that comes with the When the Green LED signature light illuminates, the RF frequency code setting function will be activated. bed is already paired with your bed. No further action is required. Only replacement remote controls require user programming. STEP STEP 55 STEP 1 Place 3V Lithium battery into the remote control. Press any button on the remote control.
Remote Control Emergency Power Down Feature Your Motion SIGNATURE adjustable foundation has an emergency lowering feature in the event that your base is in the raised position and has lost power due to a power outage. STEP 3 Press the “FLAT” button (C) or the individual lowering buttons (E, G) to lower the foundation to flat position. STEP 4 STEP 1 Locate and remove the cover for the 9 volt batteries. Remove the two 9 volt batteries and replace the battery cover.
Remote Stand User’s Guide II. Installation To avoid accident or injury, please read the Mfollowing instructions before use. 1. Refer to drawing in Part I. Plug the remote stand into the 120V AC power strip outlet under the bed. 2. Plug light electrical devices into the remote stand outlets as desired. 3. Plug USB cord in front to charge your mobile devices. 4. Place your remote in the cradle of the front side of the stand for storage. 1. The stand is for indoor use only. 2.
Troubleshooting In the Event the Motion SIGNATURE adjustable foundation fails to operate, investigate the symptoms and possible solutions provided in the chart below : SYMPTOM SOLUTION Remote control LED illuminates and appears to be operable but will not activate the bed. • Verify the power cord is plugged into a working, grounded electrical outlet. A grounded, electrical surge protection device is recommended. Test the outlet by plugging in another working appliance.
25 YEAR LIMITED WARRANTY Register Online. For easy registration of your warranty visit www.reverie.com Please prepare a digital copy of your proof of purchase (invoice or sales receipt) when registering online. 1-Year Parts and Labor Warranty Your Serta® Motion SIGNATURE™ adjustable base is warranted by the manufacturer against defects in materials or workmanship for a period of one year from the date of purchase to the original Purchaser.
ADDITIONAL TERMS & CONDITIONS This warranty does not include reimbursement for inconvenience, removal, part(s) installation, bed set up, loss of use, normal wear and tear, shipping or any other costs or expenses not expressly covered in this warranty.
Serta ® Motion SIGNATURETM Limited Warranty Register Online. For easy registration of your warranty visit www.reverie.com Please prepare a digital copy of your proof of purchase (invoice or sales receipt) when registering online. Manufactured by Reverie® for Serta®. For Warranty and Service: 800-695-2540 warrantyservice @ reverie.com 341 Central Ave. Silver Creek, NY 14136 www.reverie.
