AWM820 Owner’s Manual HIGH POWER AM/FM STEREO/CASSETTE PLAYER DESIGNED SPECIFICALLY FOR THE VAN AND RV INDUSTRIES
CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (ON BACK). NO USERSERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. The lightning flash and arrowhead within the triangle is a warning sign alerting you of "dangerous voltage" inside the product. The exclamation point within the triangle is a warning sign alerting you of important instructions accompanying the product. WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS APPLIANCE TO RAIN OR MOISTURE.
IDENTIFICATION OF CONTROLS / CONNECTIONS 22 21 20 19 1 2 3 4 5 1) 2) 3) 4) 5) 6) 7) 8) 9) 10) 11) 12) 13) 14) 15) 16) 17) 18) 19) 20) 21) 22) 6 7 18 17 16 15 8 14 9 10 13 12 11 1 Tuning Up / Minute Set Button Tuning Down / Hour Set Button Mute / AS/PS / Loud Buttons Time Set Button Display Window Alarm Set / Alarm On/Off Buttons Button Reset Preset Buttons Cassette Fast Forward Button Cassette Rewind Button Cassette Player Cassette Eject Button Speaker Selector 1/8” Auxiliary Input Jack St
INSTALLATION AND HOOK UP 1) Cut mounting hole in desired location using mounting hole diagram (right). 2) Route power, speaker, and antenna cables through hole, and connect to unit as shown in hook up diagram below. 3) After making sure connections are correct, test unit operation as described in the operation section (Do not mount until AM antenna trimmer adjustment has been made.
OPERATING INSTRUCTIONS NOTE: Number in parenthesis (#) corresponds with “Identification of Controls / Connections” on page 1 of this manual. LIQUID CRYSTAL DISPLAY PANEL The liquid crystal display (LCD) panel displays the frequency, time, and activated functions. Note: It is a characteristic of LCD panels that if subjected to cold temperatures for an extended period of time, they will take longer to illuminate than under normal conditions.
AUXILIARY INPUT 1) Push Power Switch (17) “on”. 2) Using the Source Selectors (18), choose the button labeled “AUX”. 3) If there is an external source (ie. CD shuttle) connected to the Auxiliary In Jacks (21) on the rear of the radio, then you can listen to your external source through the system. 4) An external auxiliary source can also be used (such as a portable cassette player) through the 1/8” Auxiliary Stereo Input Jack (14) on the front of the radio.
BEEP FEATURE 1) Hold the Audio Adjust button to enable the beep feature (16). Lower right side will display an audio symbol when this feature is turned on. 2) When this feature is on, turning different features on or off will produce two different tones, higher tone for ON, and lower tone for OFF. 3) Completely removing power from the unit will turn the beep feature off.
SPECIFICATIONS Size: Overall Size Mounting Size Operating Voltage: Output Power: Output Wiring: Output Impedance: Tuning Range: Sensitivity: FM Stereo Separation: Frequency Response: Wow & Flutter: Tape S/N Ratio: 10.43” (W) x 7” (H) x 6.25” (D) 265mm (W) x 178mm (H) x 159mm (D) 9.25” (W) x 6.05” (H) x 5.
ACCESSORY LIST Description AVT-988 9” Color Television with Remote (12V) AVT-597 5” Color Television with Remote (12V) AVT-1498 13” Color Television with Remote (12V) AVP-7000 Video Cassette Player (12V) AVP-7285 Video Cassette Player (12V) Wireless Headphone Kit: Includes 2 sets Wireless Headphones and Transmitter BPA-501-12 4 Amp Adapter for use with AVT-988 9” and AVT-1498 13” Televisions AC2A- 2 Amp Adapter for use with AVT-597 5” TV and AVP-7000 Video Cassette Player Unified Remote Control VAC-21- 12
23319 Cooper Drive Elkhart, IN 46514 (219) 264-3135 FAX (219) 264-3007 www.asaelectronics.