Quick Start Guide

Aruba LS-BT35 Location
Beacon
Startup Guide
The Aruba LS-BT35 Location Beacon is designed to provide mobile
device location awareness and/or asset tracking with the Meridian
Mobile Engagement tools. The LS-BT35 is battery-powered and uses
the latest BLE 5.0 chipset. The LS-BT35 has a 5+ year battery life when
used in Beacon mode, and a 6+ year battery life when used in Asset
Tag mode. The LS-BT35 has the following key features:

Enhanced security

Real-time clock

NFC features

Accelerometer

Mechanical tamper-proof on/off switch

Programmable button

LED visual indicator

Fixed attenuator
Package Contents
The following materials are included with this product:

Aruba LS-BT35
Inform your supplier if there are any incorrect, missing, or damaged
parts. To return this product, repack this unit and other included
materials into the original packaging before returning it to the
supplier.
Installation and Activation
This device must be professionally installed and serviced by a trained
Aruba-Certified Mobility Professional (ACMP), or similar Aruba-
certified technician. The device ships with adhesive pads to install the
device on a flat surface in an indoor environment. Optional accessory
kits are available that allow you to mount the device in an indoor and
outdoor environment. For more information about the
indoor and outdoor mounting kits, contact your Aruba sales
representative.
To install this device, refer to the Aruba LS-BT35 Location Beacon
Installation Guide by scanning the QR code in this section, or visiting
the Documentation tab on support.arubanetworks.com
, then select
Hardware Installation Guides > BLE > LS-BT35
Software
For instructions on initial setup and software configuration, refer to the
latest version of the AP Software Quick Start Guide by scanning the QR
code in this section, or visiting the Documentation tab on
support.arubanetworks.com, then select the
Software User & Reference Guides > Aruba Unified.
Software End User License Agreement
The End User License Agreement (EULA) information for this product can
be found at www.arubanetworks.com/assets/legal/EULA.pdf.
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains
country-specific restrictions and additional safety and regulatory
information for all Aruba devices.
The regulatory model numbers (RMN) for the LS-BT35 is:
 LS-BT35: ARBT0035
Changes or modifications to this unit not expressly approved by
Aruba Networks, a Hewlett Packard Enterprise company for
regulatory compliance can void the user’s authority to operate this
equipment.
RF Radiation Exposure Statement
The product comply with the US/Canada portable RF exposure limit
set forth for an uncontrolled environment and are safe for intended
op
eration as described in this manual. The further RF exposure
reduction can be achieved if the product can be kept as far as
possible
from the user body or set the device to lower output power if
such function is available.
Déclaration d'exposition aux radiations:
Le produit est conforme aux limites d'exposition pour les appareils
portables RF pour les Etats-Unis et le US/Canada établies pour un
envir
onnement non contrôlé. Le produit est sûr pour un
fonctionnement tel que décrit dans ce manuel. La réduction aux
expos
itions RF peut être augmentée si l'appareil peut être conservé
aussi loin que possible du corps de l'utilisateur ou que le dispositif est
r
églé sur la puissance de sortie la plus faible si une telle fonction est
disponible. Figure 1 Label Placement for the LS-BTXX
Brazil
Este equipamento não tem direito à proteção contra interferência
prejudicial e não pode causar interferência em sistemas devidamente
autorizados.
Canada
This device complies with Industry Canada’s license-exempt RSSs.
Operation is subject to the following two conditions: (1) This device
may not cause interference; and (2) This device must accept any
interference, including interference that may cause undesired
operation of the device.
Déclaration d’Industrie Canada
Ce périphérique est conforme aux règlements RSS exempts de licence
d’Industrie Canada. L’utilisation de ce périphérique est soumise aux
deux conditions suivantes : (1) ce périphérique ne doit pas provoquer
d’interférences, et (2) ce périphérique doit accepter toute
interférence, y compris les interférences susceptibles de provoquer
un dysfonctionnement.
European Union
The Declaration of Conformity made under RED 2014/53/EU is
available for viewing at: www.hpe.com/eu/certificates. Select the