Declaration of Conformity

Aruba AP-USB-ZB Zigbee
Module
Startup Guide
The Aruba AP-USB-ZB Zigbee Module is designed to enable selected
Aruba access points with USB interface to support IOT use cases with
external USB Zigbee 802.15.4 radio. The AP-USB-ZB Zigbee Module
provides instant access to Zigbee networks and enables network
configuration and diagnostics as well as device monitoring.
Package Contents
 AP-USB-ZB Zigbee Module (in packs of 1, 10, or 50)
Inform your supplier if there are any incorrect, missing, or damaged
parts. To return this product, repack this unit and other included
materials into the original packaging before returning it to the
supplier.
Figure 1 AP-USB-ZB Zigbee Module Front
Installation and Activation
To install this device, plug it into the USB port of your Aruba access
point or use a Type A extension cable no more than 3 meters long.
Make sure to enable the USB after installation.
The Aruba AP-USB-ZB Zigbee module is only compatible with Aruba or
OEM-branded Aruba access points.
Figure 2 Access Point USB Port
Safety and Regulatory Compliance
Aruba Networks provides a multi-language document that contains
country-specific restrictions and additional safety and regulatory
information for all Aruba devices.
The regulatory model number (RMN) for the AP-USB-ZB Zigbee
Module is:
 AP-USB-ZB Zigbee Module RMN: ARBTUSBZB1
Changes or modifications to this unit not expressly approved by Aruba
Networks, a Hewlett Packard Enterprise company could void the user’s
authority to operate this equipment.
RF Radiation Exposure Statement
This device complies with Part 15 of the FCC Rules. Operation is
subject to the following two conditions: (1) This device may not cause
harmful interference, and (2) this device must accept any interference
received, including interference that may cause undesired operation.
This equipment complies with RF radiation exposure limits. This
equipment should be installed and operated with a minimum
distance of 7.87 inches (20cm) between the radiator and your body
for 2.4 GHz. This transmitter must not be co-located or operating in
conjunction with any other antenna or transmitter.
Déclaration sur les limites d'exposition aux
radiofréquences
Cet équipement est conforme aux limites d'exposition aux
rayonnements radioélectriques spécifiées. Il doit être installé et utilisé
à une distance minimale de 20 cm par rapport à votre corps pour les
fréquences de 2,4 GHz. Cet émetteur-récepteur ne doit pas être utilisé
ou situé à proximité d'autres antennes ou émetteurs-récepteurs.
Brazil
Este equipamento não tem direito à proteção contra interferência
prejudicial e não pode causar interferência em sistemas devidamente
autorizados.
Canada
This device contains licence-exempt transmitter(s)/receiver(s) that
comply with Innovation, Science and Economic Development
Canada’s licence-exempt RSS(s). Operation is subject to the following
two conditions:
(1) This device may not cause interference.
(2) This device must accept any interference, including interference
that may cause undesired operation of the device.
Déclaration d’Industrie Canada
L’émetteur/récepteur exempt de licence contenu dans le présent
appareil est conforme aux CNR d’Innovation, Sciences et
Développement économique Canada applicables aux appareils
radio exempts de licence. L’exploitation est autorisée aux deux
conditions suivantes:1) L’appareil ne doit pas produire de
brouillage;2) L’appareil doit accepter tout brouillage
radioélectrique subi, même si le brouillage est susceptible d’en
compromettre le fonctionnement.
European Union
The Declaration of Conformity made under RED 2014/53/EU is
available for viewing at: www.hpe.com/eu/certificates. Select the
document that corresponds to your device’s model number as it is
indicated on the product label.
Mexico
La operación de este equipo está sujeta a las siguientes dos
condiciones: (1) es posible que este equipo o dispositivo no cause
interferencia perjudicial y (2) este equipo o dispositivo debe aceptar
cualquier interferencia, incluyendo la que pueda causar su operación
no deseada.
Ukraine
Hereby, Hewlett Packard Enterprise Company declares that the radio
equipment type [The Regulatory Model Number [RMN] for this device
can be found on page 1 of this document] is in compliance with
Ukrainian Technical Regulation on Radio Equipment, approved by
resolution of the CABINET OF MINISTERS OF UKRAINE dated May 24,
2017, No. 355. T-he full text of the UA declaration of conformity is
available at the following internet address: https://
certificates.ext.hpe.com/public/certificates.html
United States
This equipment has been tested and found to comply with the limits
for a Class B digital device, pursuant to Part 15 of the FCC Rules. These
limits are designed to provide reasonable protection against harmful
interference in a residential installation. This equipment generates,
uses, and can radiate radio frequency energy and, if not installed and
used in accordance with the instructions, may cause harmful
Radio
Frequency Range
MHz (Wi-Fi)
Max EIRP
Zigbee 2402-2480 9.9 dBm
0512095-03_AP-USB-ZB_Startup Guide_03.pdf 1 10/22/2019 7:56:27 AM