Operating Instructions KT4520 PC | Mac FM Transmitter for iPod® Nano (iPod® Nano not included)
Getting Started (1) Switch on your iPod® Nano. Press the Menu button and enter the Setting mode. Set “Sound Check” as “Off”. (2) Plug your Hello Kitty FM Transmitter into the 30-pin connector of your iPod ® Nano. (3) Play some music on your iPod® Nano. (4) Switch your radio to FM band and tune it to around 88.0MHz. (5) To select other transmission frequencies, please see the below instructions. (6) Set your desired volume level by adjusting the volume control of your FM receiver.
5. Due to the interference produced from the iPod@ Nano, there may be a small number of stations that cannot be received properly.. The following stations that may be poorly received are 102.3MHz – 103.7MHz. If you find that reception is poor, please try to select other transmission and reception frequencies. After the short audio files are added into your iPod’s library, they might be played. To avoid this, you should create a new playlist that includes all the songs except the short audio files.
Service Please refer to the instructions on the enclosed warranty card for returning your unit for service. Distributed by: Spectra Merchandising International, Inc. Chicago Industry Tech Park 4230 North Normandy Avenue Chicago, IL 60634, U.S.A. For Customer Service call 1-800-777-5331 Please have model number ready. Printed in China © 1976, 2006 Sanrio Co., Ltd.