Bluetooth Karaoke System w/7" TFT INSTRUCTION MANUAL KS800-BT Thank you for purchasing this Karaoke System. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference.
WARNINGS WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock.
FCC AND CANADIAN ICES NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
IMPORTANT SAFETY INSTRUCTIONS WARNINGS: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
WHAT’S IN THE BOX Contents 1. Karaoke System 2. Tablet Cradle 3. Mic Holder x 2 4. Mic Holder Screw x 4 5. AV Cable 6. Pre-recorded Karaoke CD+G Disc 7. Dynamic Microphone 8. AC-DC Power Adaptor 9. Instruction Manual 10. Warranty Card If you are missing any parts above, please contact ADT Digital LLC.
CONTROL LOCATION FRONT SIDE CRADLE RIGHT SIDE SPEAKER LEFT SIDE SPEAKER TFT SCREEN MIC HOLDER A.V.C.
TFT DISPLAY ICON CDG TRK 10/10 PROG 00:16:04 PLAYING TIME REPEAT MODE PROGRAM MODE PLAY / PAUSE / STOP INDICATOR PLAYING MODE PAUSE MODE STOP MODE PLAYING TRACK NUMBER AND TOTAL TRACK NUMBER CDG= CD+G DISC PLAYING PLAYING CD/ CDR/ USB EN - 6
MAKING THE CONNECTIONS CONNECTING POWER Plug the supplied power adapter small end into the DC jack located on the rear panel, plug the adapter into the standard AC wall socket. CAUTION: The unit is designed to operate from a mains supply of AC 100-240V~50/60Hz. If the adapter does not fit properly, turn it over and try again. Do not force it. NOTES: When the unit is not operated by the AC power or unused for long periods of the time.
MAKING THE CONNECTIONS SELECTING YOUR KARAOKE MACHINE AS YOUR SOURCE/INPUT Selecting your Karaoke Machine as a source / input on your TV is very similar to connecting a VCR/DVD or Satellite system. We’ve listed below the most common ways of selecting the source from your TV or VCR / Home Theater: 1. In the set up menu of the TV or VCR / Home theater there may be an option for “Input Select” where you can choose between “Cable/Ant., Video 1, Video 2, etc” as the input source. 2.
MAKING THE CONNECTIONS Line-out connection Except the RCA connection, there is another audio line-out with 3.5mm jack on the unit. User can use a 3.5mm to RCA cable (not included) to connect the audio signal from the unit to your TV/ Home theater and other stereo audio system. 1. Connect the 3.5mm plug audio cables to the Line Out of the back of your Karaoke Machine. 2. Connect the other end of the audio cables to the Audio/Auxiliary input on your TV or VCR/Home Theater or home audio system.
INSTALLATION GUIDE FOR MIC HOLDERS 1. Take microphone holders and screws from polybag. 2. Put one microphone holder to one side. You need to match its orientation just like the picture shown. 3. Use screwdriver to tighten the microphone holder just like the picture shown. You need two screws for each microphone holder. 4. Repeat step 2 - 3 to install another microphone holder on the other side.
MAKING THE CONNECTIONS SETTING UP YOUR MICROPHONE 1. Plug a microphone into the MIC1 or MIC2 jack at the rear of your Karaoke Machine. Their output is mixed with playback from CD/CD+G. 2. Located on the microphone, there is an ON/OFF switch. 3. Ensure you set the ON/OFF switch on the microphone to ON when required for use.
CD OR CD+G / MP3+G OPERATION PLAY/PAUSE 1. To start playing, press the PLAY/PAUSE button once, the currently track number and PLAY indicator will appear on the screen. 2. To temporarily stop playing, press the PLAY/PAUSE button, the PAUSE indicator will be shown on the screen. 3. To resume play, press the PLAY/PAUSE button again, the PLAY indicator will be shown on the screen.
CD OR CD+G / MP3+G OPERATION REPEAT PLAY (For both CD and CD+G/MP3+G discs) 1. During playback, press PROGRAM/REPEAT button once, the REP ONE indicator will appear on the TFT screen, it can keep repeat the current track. 2. To repeat the Directory/Folder, press PROGRAM/REPEAT button twice, the REP FOLDER indicator will appear on the TFT screen. 3. To repeat all tracks in disc, press PROGRAM/REPEAT button again, the REP ALL indicator will appear on the TFT screen. 4.
CD OR CD+G / MP3+G OPERATION BALANCE Adjust the BALANCE control between the pre-recorded singer’s voice and the music when using a multiplex karaoke disc. AUTO VOICE CONTROL AUTO VOICE CONTROL can be activated and adjusted by the AVC control knob. The vocals on the Multiplex recording will be muted when the singer starts to sing through the microphone. When the singer stops singing, the vocals will resume to normal. MASTER VOLUME Rotate to the MASTER VOLUME control to obtain the desired sound level.
USB OPERATION INSERTING USB FLASH DRIVE 1. Insert a USB flash driver into the USB socket on the front of your karaoke system. 2. Make sure that USB is selected as the audio source. See "SELECTING THE AUDIO SOURCE” 3. Press PLAY/PAUSE to start playback. PLAY/PAUSE 1. To start playing, press the PLAY/PAUSE button once, the currently track number and PLAY indicator will appear on the screen. (“USB” will be shown on the screen). 2.
USB OPERATION REPEAT PLAY 1. During playback, press PROGRAM/REPEAT button once,the REP ONE indicator will appear on the TFT screen, it can keep repeat the current track. 2. To repeat the Directory/Folder, press PROGRAM/REPEAT button twice, the REP FOLDER indicator will appear on the TFT screen. 3. To repeat all tracks in disc, press PROGRAM/REPEAT button again, the REP ALL indicator will appear on the TFT screen. 4.
BLUETOOH OPERATION BLUETOOTH SETUP Pairing is the term used when two Bluetooth devices are connected wirelessly for the first time. 1 Press STOP / MODE button to toggle to Bluetooth mode. 2. The Bluetooth indicator will flash quickly. If the unit does not automatically begin to pair, press and hold the PAIRING button. 3. Using the native controls on your Bluetooth Device, select the " KS800-BT" in your Bluetooth setting to pair. 4. When successfully paired, the Bluetooth indicator will stop flashing.
CARE AND MAINTENANCE *Carrying for Compact Discs 1. Treat the disc carefully. Handle the disc only by its edges. Never allow your fingers to come in contact with the shiny, unprinted side of the disc. 2. Do not attach adhesive tape, stickers, etc. to the disc label. 3. Clean the discs periodically with a soft, lint-free, dry cloth. Never use detergents or abrasive cleaners to clean the disc. If necessary, use a CD cleaning kit.
TROUBLE SHOOTING PROBLEM POSSIBLE CAUSE SOLUTION No power when POWER is on. AC adaptor is not plugged into a wall outlet or the connector is not plugged into the power supply jack on the back of the unit. Plug the AC adaptor into a wall outlet and plug the connector into the supply jack on the unit. No power when plugged in. The AC outlet may not have Check the outlet with a working lamp or other power. electrical appliance. No sound from TV.
TROUBLE SHOOTING PROBLEM No sound - when audio is connected to a home stereo. No song lyrics appear on the TV screen POSSIBLE CAUSE • Source Selection on your stereo is not set properly • Improper Connection to stereo system No Video is displayed on the TFT Screen. • Select AUX IN as the source for your home stereo • Follow direction on “Making the for Connections” for connecting to a home stereo system • RCA cords are not connected securely.
TROUBLE SHOOTING No sound when playing audio via Bluetooth. Your Bluetooth device hasn’t been paired properly. Pairing your Bluetooth device according to the "Bluetooth setup" section. The volume control of your Bluetooth device is set too low. Increase the volume of your Bluetooth device. The volume control of the unit is set too low. Increase the volume of the unit by VOLUME control.
THE KARAOKE MACHINE (GLOSSARY OF TERMS) Following are some brief descriptions of karaoke terms you may need: Echo: By adding some minor feedback to your voice the Echo feature adds depth and resonance to a singer's voice. Echo affects only your voice and not the music. It will make you sound like you are singing in a big concert hall. Multiplex: This karaoke system is capable of playing Multiplex CD+G Karaoke discs.