Stereo Mini System INSTRUCTION MANUAL CEU5000-BT Thank you for purchasing this Stereo Mini System. Please read this instruction manual carefully before using this product to ensure proper use. Keep this manual in a safe place for future reference. www.AKAI-USA.
WARNING: TO REDUCE THE RISK OF FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS PRODUCT TO RAIN OR MOISTURE. CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION: TO PREVENT THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER OR BACK. NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED PERSONNEL. This symbol is intended to alert you to the presence of uninsulated dangerous voltage within the product’s enclosure that might be of sufficient magnitude to constitute a risk of electric shock.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.
WARNINGS: To reduce the risk of fire or electric shock, do not expose this apparatus to rain or moisture. Avertissement: pour réduire le risque d’incendie ou de choc électrique, ne pas exposer cet appareil sous la pluie et l’humidité. The apparatus shall not be exposed to dripping or splashing and that no objects filled with liquids, such as vases, shall be placed on apparatus.
Contents 5. AM Antenna 1. CEU5000-BT (Main Unit) 2. CEU5000-BT (Speaker x 2) 6. Instruction Manual 7. Warranty Card 3. Remote Controller ADT Digital LLC 4. FM Antenna If you are missing any parts above, please contact ADT Digital LLC.
CONTROL LOCATION FRONT PANEL 3 5 4 2 6 7 8 9 15 10 11 18 19 20 16 17 12 13 14 21 22 31 30 29 28 27 26 25 24 23 2. VFD DISPLAY 12. CD REC 23. USB 2 3. NFC FUNCTION 13. CD-USB 24. USB 1 4. VOLUME 14. RECORD STOP 25. OPEN/CLOSE 5. TONE CONTROL 15. PREVIOUS 26. DISC TRAY 6. BALANCE L/R 16. NEXT 27. REMOTE SENSOR 7. USB SELECT 17. FOLDER+/T-UP 28. MIC VOL 8. BLUETOOTH 18. EQ 29. MIC JACK 2 9. POWER SWITCH 19. PLAY/PAUSE 30. MIC JACK 1 10. TUNER 20. FOLDER-/T-DN 31.
CONTROL LOCATION BACK PANEL 34 35 32 36 32. FM ANTENNA 33. AM ANTENNA 34. SPEAKER LIGHT OUTPUT 35. AC CORD INPUT 36. VIDEO OUTPUT 37.
CONTROL LOCATION 13 1 14 2 15 16 17 18 19 3 4 5 6 7 8 20 21 22 9 23 10 24 25 11 12 26 27 1. 2. 3. 4. 5. 6. 7. 8. 9. POWER SLEEP FOLDER+ FOLDER – ID3 ON TIMER PROG REPEAT OPEN/ CLOSE 10. 11. 12. 13. 14. 15. 16. 17. 18. MEM. DN/ BACK NUMERIC KEYS CLOCK MUTE FAST FORWARD FAST BACKWARD RECORD/ STOP RECORD USB EN - 7 19. 20. 21. 22. 23. 24. 25. 26. 27. BLUETOOTH FUNCTION EQ PLAY/ PAUSE MEM.
POWER CONNECTION Connecting AC Power Plug the AC power cord into a standard AC socket. The unit is designed to operate from a main supply of AC120V~ 60Hz. CAUTION: The supplied AC power cord has a polarized plug that fits into the wall outlet only one way. If the plug does not fit properly, turn it over and try again. Do not force it. NOTE: When the unit is intended for being unused for a long period of the time. Please turn off the unit and unplug the power cord from the AC wall outlet.
VOLUME CONTROL Adjust the volume, press “+” to increase or “-“ to decrease the volume on remote control or rotate the “VOLUME” knob on main unit. To prevent possible hearing damage, do not listen at high volume level for long periods of time. PRESET EQUALIZER/ TREBLE/ BASS You can choose 7 different preset EQ while you are listening music. Each time the EQ button is pressed, it will change in the following sequence.
LISTEN TO RADIO 1. Press “TUNER” on unit or “FUNCTION” on remote control to “AM” or “FM”. 2. To launch auto-searching, press and hold the T-UP / T-DN button several seconds and then release. When a station is found the unit will stop auto-searching and start broadcasting. 3. Press the T-UP or T-DN buttons to tune the radio station manually. 4. Adjust VOLUNME CONTROL and PRESET EQUALIZER to a comfortable listening level. PRESET RADIO STATIONS You can preset up to 30 FM and AM stations 1.
NORMAL PLAY 1. Set “FUNCTION” to “DISC” on remote control or press “CD” on the unit. 2. Open the CD tray by pressing “OPEN/ CLOSE” button “ ”, place a CD on the tray and press the same button to close the CD door. Press “PLAY/PAUSE” button to start playing. 3. Adjust VOLUME CONTROL and EQ to a comfortable listening level. 4. Skip Function a) Press skip forward button to skip to the next track.
NOTES ON HANDLING COMPACT DISCS To keep the disc clean, handle the disc by its edge. Do not touch the disc surface. Do not stick paper nor write anything on the surface. After playing, store the disc in its case. USB PLAY OPERATION There are 2 USB inputs in the front panel on the unit “USB1” and “USB2”. You can connect USB driver through either USB1 or USB2 interface. Play the USB, first press “CD-USB” button then select USB 1 or 2 by pressing “USB/SELECT” button.
COPY FUNCTION (ONLY FOR ITEMS RECORDED ON THE CD) This feature allows you, for example, record a song from a CDA file or a MP3 file to a USB device. 1. Connect the device (such as a Pen Drive) to the USB socket 1 or 2 on the front panel. 2. Place the CD into the slot with the subject to be recorded. 3. Play the CD track. Display will show USB 1 – 2. Press “ 1” or “2” to select either USB for record. 4. Click the “RECORD” button from the remote control or ‘REC’ on the unit atany time during CD playback. 5.
TROUBLE SHOOTING GUIDE If you have followed the instructions and are having difficulty operating the unit, locate the PROBLEM in the left column below. Check the corresponding POSSIBLE CAUSE column to locate and remedy the problem. PROBLEM POSSIBLE CAUSE REMEDY No sound in general Volume no adjusted. Adjust the volume knob. The unit does reset to operation of any button Under the influence of electrostatic phenomenon, the product may malfunction and require user to disconnect.
