AWS24S User Manual 2.
.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual Introduction One of the bottlenecks that many product developers encounter in incorporating any radio communication device is facing the legal aspect of qualifying the products and going to market without encountering legal problems. The Telecommunication Certification Body (TCB) authorization process in the United States offers manufacturers more than one approval body.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual Table of Content Page 1.0 Eligibility Requirements for Regulatory Module Approval………………………………. 4 2.0 User Guide Information………………………………………………………………………… 5 3.0 United States Regulatory FCC Modular Approval (MA)…………………………..………. 5 3.1 Antenna Regulation………………………………………..……………………………. 5 3.2 Emissions Compliance Testing……………………………………………………..... 6 3.3 Working with Additional Transmitters……………….……………………………… 6 3.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 1.0 Eligibility Requirements for Regulatory Module Approval The Artaflex 2.4GHz DSSS SPI Radio with Integrated Print Antenna module (AWS24S) is a device that transmits and receives radio signals in accordance with the spectrum regulations for the 2.4GHz unlicensed frequency range. Regional regulatory agency approval may be required to operate AWS24S throughout the world.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 2.0 User Guide Information Electronic device manufacturers using Artaflex’s Modular Approval are required to place the below text in their product user’s guide in accompaniment with other regulatory information. The text may be disbursed according to language or geographic regions if desired, but the exact text shown below must be maintained. 3.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 3.2 Emissions Compliance Testing Notwithstanding the Modular Approval for the Radio Device with associated antenna, the end product configuration must meet digital emissions compliance and must be tested in accordance with FCC Part 15 requirements confirming radiated emissions are within specified limits. Applicable FCC guidelines: • Part 15 Section 15.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 3.4 Product Labeling Requirements FCC product labeling requirements stipulate an FCC label, including specific text, be placed on the device containing the AWS24S module. The product label must include the following text and must be affixed to the exterior of the OEM’s product. The text should be located beneath the FCC compliance logo.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 4.1 Product Labeling Requirements Industry Canada product labeling requirements stipulate specific text be placed on the device containing the AWS24S module. The product must include the following text and must be located on the exterior of the OEM’s product. This same information must be included in the product user manual. “This product contains Artaflex AWS24S Transmitter Module Canadian Cert No IC: 6779A-AWS24S” 5.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual 5.2 European Countries recognizing Modular Approval The following text must be copied exactly into the product’s user’s guide: “This product contains a radio transmitter with WirelessUSB technology which has been tested and found to be compliant with the applicable regulations governing a radio transmitter in the 2.400 GHz to 2.4835 GHz frequency range.
2.4GHz DSSS SPI Radio for External Antenna AWS24S User Manual Artaflex Inc. disclaims all liability, including liability for infringement of any proprietary rights, relating to use of information in this document. No license, expressed or implied, by estoppel or otherwise, to any intellectual property rights is granted herein. Artaflex Inc. 215 Konrad Crescent Markham, Ontario, Canada L3R8T9 905-479-0148 UMAWS24S Rev 2v0 Revised March 13, 2007 Page 10 of 10 http://www.artaflexmodules.
