HeadAmp 6 Pro 6 CHANNEL HEADPHONE AMPLIFIER SYSTEM USER’S GUIDE 1
IMPORTANT SAFETY INSTRUCTIONS – READ FIRST This symbol, wherever it appears, alerts you to the presence of uninsulated dangerous voltage inside the enclosure. Voltage that may be sufficient to constitute a risk of shock. This symbol, wherever it appears, alerts you to important operating and maintenance instructions in the accompanying literature. Please read manual. Read Instructions: Retain these safety and operating instructions for future reference.
The ART HeadAmp 6 Pro 6 Channel Headphone Amplifier System IMPORTANT SAFETY INSTRUCTIONS – READ FIRST ...............................................3 INTRODUCTION..........................................................................................................5 INSTALLATION...........................................................................................................5 AC Power Hookup ........................................................................................................
INTRODUCTION The ART HeadAmp 6 Pro is a six-channel stereo headphone amplifier that includes a six-channel auxiliary input section that can be used to provide the popular “More-Me” function on each headphone mix. Each output channel also features a dual function BALANCE control which will pan between LEFT & RIGHT sides of the main signal bus, or vary the MIX between the main signal bus and the AUXILIARY input for that respective channel.
CONTROLS and JACKS Front Panel FIGURE 1 - Master Input and Channel One Direct In Jack The 1/4-inch TRS (Tip, Ring, Sleeve) jack on the front panel provides a stereo unbalanced input which when used will override the rear panel balanced inputs. This input is useful for when you want to temporarily insert a different main input signal from what is connected to the rear inputs, or simply make an unbalanced TRS style connection to another headphone output source.
Bass Control This control can be used to boost or cut the low frequencies in each respective channel. The bass response is flat when the control is set to the 12 o’clock position. Treble Control This control can be used to boost or cut the high frequencies in each respective channel. The treble response is flat when the control is set to the 12 o’clock position.
Balanced Main Inputs These XLR and 1/4-inch TRS jacks are active balanced and are used for line level signals. The gain sensitivity is identical for both the XLR and 1/4-inch TRS jacks. (NOTE: the front panel DIRECT IN jack overrides these inputs when it is used.) Balanced Main Thru These XLR and 1/4-inch TRS jacks are hardwired in parallel with the corresponding BALANCED MAIN INPUT jacks. The BALANCED MAIN THRU jacks are useful for daisy chaining multiple HeadAmp 6 Pro units together.
HEADAMP 6 PRO OPERATION Start with the MASTER VOLUME and LEVEL controls on all channels set fully counter-clockwise. Set the BASS, TREBLE, and BALANCE controls to their 12 o’clock positions. Set all mono switches to their “OUT” position.
APPLICATIONS FIGURE 4 - Headphone Distribution Application 10
FIGURE 5 - “More Me” Foldback Application 11
WARRANTY INFORMATION Limited Warranty: Applied Research and Technology will provide warranty and service for this unit in accordance with the following warrants: Applied Research and Technology, (A R T) warrants to the original purchaser that this product and the components thereof will be free from defects in workmanship and materials for a period of three years from the date of purchase.
SERVICE The following information is provided in the unlikely event that your unit requires service. 1) Be sure that the unit is the cause of the problem. Check to make sure the unit has power, all cables are connected correctly, and the cables themselves are in working condition. You may want to consult with your dealer for assistance in troubleshooting or testing your particular configuration. 2) If you believe the ART unit is at fault, go to www.artproaudio.com.
HEADAMP 6 PRO SPECIFICATIONS Input Impedance Balanced Main Input XLR and 1/4-inch TRS Jacks....................40K Ohm Balanced Direct In TRS Jack .....................................................................9.9K Ohm Stereo Aux Input TRS Jacks ......................................................≤ 21K to ≥ 15K Ohm CMRR @ 1KHz ..........................................................................≥ 40dB Output Impedance Headphone output............................................................
www.artproaudio.com E-mail: support@artproaudio.