KF Manual for Certification Version: The information contained in this document is the sole property of ARRIVAL. Any reproduction, in any part or as a whole without the written permission of ARRIVAL is fobidden.
KF Manual for Certification Table of Contents 1 Using the Key Fob............................................................................................................... 6 1.1 Key fob range.............................................................................................................................................6 1.2 Key fob operation......................................................................................................................................7 1.
KF Manual for Certification List of Figures No numbered figures included in this document 3
KF Manual for Certification List of Tables No numbered tables included in this document 4
KF Manual for Certification This is an excerpt of the full Arrival Van user manual. Manufacturer identification, EU address and UK address are stated at the informative part of the Arrival Van user manual.
KF Manual for Certification 1 Using the Key Fob WARNING To avoid accidental operation of the vehicle's systems by other occupants, do not leave a key fob in an unattended vehicle. CAUTION To ensure your vehicle is left in a secure state, remove all key fobs from the vehicle before leaving it unattended. 1.1 Key fob range The key fob communicates with receivers in the vehicle via Bluetooth® Low Energy and UWB ultra-high frequency radio communication.
KF Manual for Certification When located near the door in zone D, nearest door is automatically unlocked - the user needs to push the switch next to the door to open it. When leaving your vehicle while carrying a key fob, all doors automatically lock upon egressing zone C. When the driver with the key fob is located in zone E, it is allowed to drive the vehicle. 1.2 Key fob operation The key fob is in operational range when it is able to connect to the vehicle.
KF Manual for Certification 2 Replacing the Key Fob Battery WARNING The key fobs supplied with your vehicle contain a coin/button type battery. These batteries contain toxic and corrosive substances. Batteries are a chemical burn hazard and should never be ingested. If a battery is swallowed, it can cause serious internal burns and may even lead to death. Keep new and used batteries out of the reach of children.
KF Manual for Certification 3 Caring for the Key Fob CAUTION To protect the electronic circuitry inside, do not expose the key fob to: Impacts Liquids High temperatures (including prolonged sunlight exposure) Waxes, solvents, or abrasive cleaners 9
KF Manual for Certification 4 Replacement Key Fobs If you lose a key fob, contact an Arrival Authorised Repairer to obtain a replacement. If ordering a new key fob, all available key fobs for the vehicle must be brought to the Arrival Authorised Repairer in order to reprogram the system.
KF Manual for Certification 5 Device information Key fob operation frequencies and maximum transmit power are: Band Frequency range Max. power BLE 2.4G 2400-2483.5 MHz +6dBm UWB 6.0-8.5 GHz +10dBm WARNING This device complies with part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.